BS ISO IEC 16680-2012 Information technology The Open Group Service Integration Maturity Model (OSIMM)《信息技术 开发组织服务集成成熟度模型(OSIMM)》.pdf

1、raising standards worldwide NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BSI Standards Publication BS ISO/IEC 16680:2012 Information technology The Open Group Service Integration Maturity Model (OSIMM)BS ISO/IEC 16680:2012 BRITISH STANDARD National foreword This British Sta

2、ndard is the UK implementation of ISO/IEC 16680:2012. The UK participation in its preparation was entrusted to Technical Committee ICT/-/1, Information systems co-ordination. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not

3、purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2012. Published by BSI Standards Limited 2012 ISBN 978 0 580 73347 5 ICS 37.100.10 Compliance with a British Standard cannot confer immunity from legal

4、obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2012. Amendments issued since publication Date Text affectedBS ISO/IEC 16680:2012Reference number ISO/IEC 16680:2012(E) ISO/IEC 2012INTERNATIONAL STANDARD ISO/IEC 16680 First

5、 edition 2012-05-01 Information technology The Open Group Service Integration Maturity Model (OSIMM) Technologies de linformation Modle de maturit dintgration du service de groupe ouvert (OSIMM) BS ISO/IEC 16680:2012 ISO/IEC 16680:2012(E) COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2012 All rights reserved

6、. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester.

7、 ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO/IEC 2012 All rights reservedBS ISO/IEC 16680:2012 ISO/IEC 16680:2012(E) ISO/IEC 2012 All rights reserved iiiForeword ISO (the I

8、nternational Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees esta

9、blished by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In th

10、e field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of the joint technical committee is to prepare International Standards.

11、Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is drawn to the possibility that some of the elements of t

12、his document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. ISO/IEC 16680 was prepared by The Open Group and was adopted, under the PAS procedure, by Joint Technical Committee ISO/IEC JTC 1, Information technology, in par

13、allel with its approval by national bodies of ISO and IEC. BS ISO/IEC 16680:2012Open Group Standard The Open Group Service Integration Maturity Model (OSIMM) Version 2 BS ISO/IEC 16680:2012BS ISO/IEC 16680:2012 ISO/IEC 16680:2012(E) Copyright 2009-11, The Open Group. All rights reserved. This printi

14、ng is by the International Organization for Standardization with special permission of The Open Group. The Open Group hereby authorizes you to copy this document for non-commercial use within your organization only. In consideration of this authorization, you agree that any copy of this document whi

15、ch you make shall retain all copyright and other proprietary notices contained herein. This document may contain other proprietary notices and copyright information. Nothing contained herein shall be construed as conferring by implication, estoppel, or otherwise any license or right under any patent

16、 or trademark of The Open Group or any third party. Except as expressly provided above, nothing contained herein shall be construed as conferring any license or right under any copyright of The Open Group. Note that any product, process, or technology in this document may be the subject of other int

17、ellectual property rights reserved by The Open Group, and may not be licensed hereunder. This document is provided “AS IS“ WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INF

18、RINGEMENT. Some jurisdictions do not allow the exclusion of implied warranties, so the above exclusion may not apply to you. Any publication of The Open Group may include technical inaccuracies or typographical errors. Changes may be periodically made to these publications; these changes will be inc

19、orporated in new editions of these publications. The Open Group may make improvements and/or changes in the products and/or the programs described in these publications at any time without notice. Should any viewer of this document respond with information including feedback data, such as questions,

20、 comments, suggestions, or the like regarding the content of this document, such information shall be deemed to be non-confidential and The Open Group shall have no obligation of any kind with respect to such information and shall be free to reproduce, use, disclose and distribute the information to

21、 others without limitation. Further, The Open Group shall be free to use any ideas, concepts, know-how, or techniques contained in such information for any purpose whatsoever including but not limited to developing, manufacturing, and marketing products incorporating such information. Technical Stan

22、dard The Open Group Service Integration Maturity Model (OSIMM), Version 2 ISBN: TBA Document Number: TBA Published by The Open Group, . Comments relating to the material contained in this document may be submitted to: The Open Group, Apex Plaza, Forbury Road, Reading, Berkshire, RG1 1AX, United King

23、dom or by electronic mail to: ogspecsopengroup.org ii Technical Standard (2012) BS ISO/IEC 16680:2012 ISO/IEC 16680:2012(E) Contents 1 Introduction 1 1.1 Objective . 1 1.2 Overview . 1 1.3 Conformance . 2 1.4 Terminology 3 1.5 Future Directions 7 2 The Model 8 2.1 Overview . 8 2.2 Maturity Levels .

24、10 2.2.1 Level 1: Silo 10 2.2.2 Level 2: Integrated . 10 2.2.3 Level 3: Componentized 10 2.2.4 Level 4: Service . 10 2.2.5 Level 5: Composite Services . 11 2.2.6 Level 6: Virtualized Services 11 2.2.7 Level 7: Dynamically Re-Configurable Services 11 2.3 Dimensions . 12 2.3.1 Business . 12 2.3.2 Orga

25、nization to facilitate interoperability, develop consensus, and evolve and integrate specifications and Open Source technologies; to offer a comprehensive set of services to enhance the operational efficiency of consortia; and to operate the industrys premier certification service, including UNIX ce

26、rtification. Further information on The Open Group is available at www.opengroup.org. The Open Group has over 15 years experience in developing and operating certification programs and has extensive experience developing and facilitating industry adoption of test suites used to validate conformance

27、to an open standard or specification. More information is available at www.opengroup.org/certification. The Open Group publishes a wide range of technical documentation, the main part of which is focused on development of Technical and Product Standards and Guides, but which also includes white pape

28、rs, technical studies, branding and testing documentation, and business titles. Full details and a catalog are available at www.opengroup.org/bookstore. As with all live documents, Technical Standards and Specifications require revision to align with new developments and associated international sta

29、ndards. To distinguish between revised specifications which are fully backwards-compatible and those which are not: A new Version indicates there is no change to the definitive information contained in the previous publication of that title, but additions/extensions are included. As such, it replace

30、s the previous publication. A new Issue indicates there is substantive change to the definitive information contained in the previous publication of that title, and there may also be additions/extensions. As such, both previous and new documents are maintained as current publications. Readers should

31、 note that updates in the form of Corrigenda may apply to any publication. This information is published at www.opengroup.org/corrigenda. vi Technical Standard (2012) BS ISO/IEC 16680:2012 ISO/IEC 16680:2012(E) This Document This document is the Technical Standard for The Open Group Service Integrat

32、ion Maturity Model (OSIMM), Version 2. It has been developed and approved by The Open Group. The Open Group SOA Integration Maturity Model (OSIMM) provides consultants and IT practitioners with a means to assess an organizations Service Oriented Architecture (SOA) maturity level. It defines a proces

33、s to create a roadmap for incremental adoption which maximizes business benefits at each stage along the way. The model consists of seven levels of maturity and seven dimensions of consideration that represent significant views of business and IT capabilities where the application of SOA principles

34、is essential for the deployment of services. The OSIMM acts as a quantitative model to aid in assessment of current state and desired future state of SOA maturity. The Open Group Service Integration Maturity Model (OSIMM), Version 2 vii BS ISO/IEC 16680:2012 ISO/IEC 16680:2012(E) Trademarks Boundary

35、less Information Flow is a trademark and ArchiMate , Jericho Forum , Making Standards Work , Motif , OSF/1 , The Open Group , TOGAF , UNIX , and the X device are registered trademarks of The Open Group in the United States and other countries. The Open Group acknowledges that there may be other bran

36、d, company, and product names used in this document that may be covered by trademark protection and advises the reader to verify them independently. viii Technical Standard (2012) BS ISO/IEC 16680:2012 ISO/IEC 16680:2012(E) Acknowledgements The Open Group gratefully acknowledges the contribution of

37、the following people in the development of this document: Ali Arsanjani, IBM (Original SIMM Mapping) Tony Carrato, IBM Jorge Diaz, IBM Jack Fujieda, Regis Inc. Mats Gejnevall, Capgemini Henry Hendrikx, Capgemini Alex Heublien, HP Kerrie Holley, IBM (Original SIMM Mapping) Dave Ings, IBM Heather Kreg

38、er, IBM (Co-Author) Chris Moyer, EDS Ranu Pandit, Deloitte Vishal Prabhu, Deloitte Madhu Reddiboina, Deloitte Chuck Reynolds, Deloitte Andras Szakal, IBM (Work Group Chair, Model Extensions, Author) Srinivasan Vembakkam, IBM Mohan Venkataraman, Deloitte Steve Wolf, Marriott Members of The Open Group SOA Work Group The Open Group Service Integration Maturity Model (OSIMM), Version 2 ix