BS ISO IEC 19752-2017 Information technology Office equipment Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and mult.pdf

1、BS ISO/IEC 19752:2017 Information technology Office equipment Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and multi-function devices that contain printer components BSI Standards Publication WB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 1

2、5:06BS ISO/IEC 19752:2017 BRITISH STANDARD National foreword This British Standard is the UK implementation of ISO/IEC 19752:2017. The UK participation in its preparation was entrusted to Technical Committee IST/3, IT Printers and Cartridges. A list of organizations represented on this committee can

3、 be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017. Published by BSI Standards Limited 2017 ISBN 978 0 580 89820 4 ICS 37.100.10 C

4、ompliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2017. Amendments/corrigenda issued since publication Date T e x t a f f e c t e dBS ISO/IEC 19752:2017

5、 Information technology Office equipment Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and multi-function devices that contain printer components Technologies de linformation Mthode pour la dtermination du rendement des cartouches de toner pour

6、les imprimantes lectrophotographiques monochromatiques et pour les dispositifs multifonctionnels qui contiennent des composants dimprimantes INTERNATIONAL STANDARD ISO/IEC 19752 Reference number ISO/IEC 19752:2017(E) Second edition 2017-01 ISO/IEC 2017 BS ISO/IEC 19752:2017ii ISO/IEC 2017 All rights

7、 reserved COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2017, Published in Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet

8、 or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Ch. de Blandonnet 8 CP 401 CH-1214 Vernier, Geneva, Switzerland Tel. +41 22 749 01 11 Fax +41 22 749 09 47 cop

9、yrightiso.org www.iso.org ISO/IEC 19752:2017(E)BS ISO/IEC 19752:2017ISO/IEC 19752:2017(E)Foreword iv Introduction v 1 Scope . 1 2 Normative references 1 3 Terms and definitions . 1 4 Test parameters and conditions . 2 4.1 Set-up 2 4.2 Sample size . 3 4.3 Print mode 3 4.4 Print environment 3 4.5 Pape

10、r 4 4.6 Maintenance 4 4.7 Test file . 4 4.8 End of life . 5 5 Test methodology 5 5.1 Testing procedure . 5 5.2 Procedure for handling a defective cartridge or printer . 6 5.2.1 General 6 5.2.2 Defective cartridge . 6 5.2.3 Defective printer 6 6 Determination of the declared yield value and declarati

11、on . 6 6.1 Determination of the declared yield value 6 6.2 Test data reporting 7 6.3 Declaration of the yield 7 Annex A (informative) Examples of fade 8 Annex B (informative) Process flowchart and examples 10 Annex C (normative) Standard test page 14 Annex D (normative) Sample reporting form 21 Anne

12、x E (informative) Comparison of yield for two printing systems .24 Bibliography .26 ISO/IEC 2017 All rights reserved iii Contents PageBS ISO/IEC 19752:2017ISO/IEC 19752:2017(E) Foreword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) f

13、orm the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC

14、 technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC

15、 1. The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of document should be noted. This document was drafted in accordance with the

16、editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details of

17、 any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents). Any trade name used in this document is information given for the convenience of users and does not constitute an endo

18、rsement. For an explanation on the meaning of ISO specific terms and expressions related to conformit y assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www . i s o .org/ iso/ fore

19、word .html. The committee responsible for this document is ISO/IEC JTC 1, Information technology, SC 28, Office equipment. This second edition cancels and replaces the first edition (ISO/IEC 19752:2004), which has been technically revised. It also incorporates the Technical Corrigendum ISO/IEC 19752

20、:2004/Cor 1:2012.iv ISO/IEC 2017 All rights reservedBS ISO/IEC 19752:2017ISO/IEC 19752:2017(E) Introduction The purpose of this document is to provide a process for determining the page yield for toner cartridges for monochromatic print systems using a standard office consumer type test page. In the

21、 case where a cartridge can be used in multiple printer models, only one yield test is performed as long as the difference between printer models does not impact yield. NOTE 1 A cartridge supplier can choose to use more than one market identifier for a single physical cartridge. In this case, only o

22、ne yield test is required as long as there are no differences in the cartridges other than market identifiers. This document prescribes the following: the test method that manufacturers use to determine cartridge yield; the method for determination of declared yield values from the test results; the

23、 appropriate method of describing the yield of cartridges in documentation supplied to the consumer by the manufacturer. The end of life is judged with either of the two phenomena, “image fade” caused by toner depletion of the cartridge in the printing system or “automatic printing stop” by the tone

24、r out detection function. NOTE 2 A comparison of yield for two printing systems is shown in Annex E. ISO/IEC 2017 All rights reserved vBS ISO/IEC 19752:2017BS ISO/IEC 19752:2017Information technology Office equipment Method for the determination of toner cartridge yield for monochromatic electrophot

25、ographic printers and multi- function devices that contain printer components 1 Scope This document is limited to the evaluation of toner cartridge page yield for toner containing cartridges (i.e. all-in-one toner cartridges and toner cartridges without a photoconductor) for monochrome electrophotog

26、raphic print systems. This document could also be applied to the printer component of any multifunctional device that has a digital input-printing path (i.e. multi-function devices that contain printer components). This document is only intended for the measurement of toner cartridge yield. No other

27、 claims can be made from this testing regarding quality, reliability, etc. NOTE 1 Application of this document for yield measurement of toner replenishment systems (i.e. toner cartridge- and bottle-type systems where the toner reservoir is internal to the printing system and not user- replaceable) r

28、equires some procedural modifications specifically noted herein. This document is intended for equipment used in the office space and does not apply to production volume or large format printing machines where the major cost of ownership is not caused by the consumable yield measured in this documen

29、t. NOTE 2 An all-in-one cartridge is a cartridge that includes at least a toner containment part, a photoreceptor part and a developer part (see ISO/IEC 29142-1). 2 Normative references There are no normative references in this document. 3 Terms and definitions For the purposes of this document, the

30、 following terms and definitions apply. ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia: available at h t t p :/ www .electropedia .org/ ISO Online browsing platform: available at h t t p :/ www .iso .org/ obp 3.1 fade phenomenon

31、whereby a noticeable reduction in density uniformity across the page occurs Note 1 to entry: In this test, fade is defined as a noticeably lighter, 3 mm or greater, gap located in the text or boxes around the periphery of the test page. The determination of the change in lightness is to be made refe

32、renced to the 100th page printed for each cartridge in testing. For examples of fade, see Annex A. 3.2 shake procedure specified method to carry out shaking of a cartridge according to the user manual Note 1 to entry: If a shake procedure is used in testing, it will be noted in the report. INTERNATI

33、ONAL ST ANDARD ISO/IEC 19752:2017(E) ISO/IEC 2017 All rights reserved 1BS ISO/IEC 19752:2017ISO/IEC 19752:2017(E) 3.3 toner low signal generated by the printer when it has been detected that the amount of toner is such that a toner change will be required soon Note 1 to entry: It does not indicate t

34、hat the system is out of toner. 3.4 toner out signal generated by the printer when the toner in the system is depleted and the printer is incapable of reliable printing without user intervention Note 1 to entry: For the purpose of this test, the toner out signal will only be used if it causes the pr

35、inter to stop printing and requires toner replacement to continue printing. 3.5 end of life when the printer declares “toner out” (3.4) or when fade (3.1) is observed Note 1 to entry: For more information about the exact requirements for judging end of life, see 4.8. 3.6 individual page yield number

36、 of “standard page file” pages printed between cartridge installation and end of life (3.5) Note 1 to entry: For replenishment systems, the individual page yield is determined by counting the number of “standard page file” pages printed between prescribed quasi-end of life conditions (defined in 4.5

37、). 3.7 declared page yield value at or below the lower 90 % confidence bound as prescribed in 6.1 4 Test parameters and conditions 4.1 Set-up Place the printer on a horizontal surface and set-up the printer according to the installation guide provided in the printer users manual. Use the most recent

38、 printer driver available from the manufacturer. The driver version will be specified on the test report. Cartridge installation shall be completed following the instructions in the cartridge installation guide. If there is a contradiction between the printer and cartridge manuals for the cartridge

39、installation, the cartridge manual will take precedence except if changes are recommended for printer or driver settings. If the cartridge used in testing is a toner replenishment or toner bottle type, then one complete toner cartridge will be used in each printer before the start of the test. The p

40、ages printed to deplete this priming cartridge do not have to be recorded and printing can be conducted at any environment. This priming cartridge is used to bring the printing system to a set toner level condition. All image and print quality modifiers shall be at their factory pre-set configuratio

41、n for the printer and default installed condition for the driver. If the printer and driver differ, then the driver defaults shall be used. Any user selectable toner conservation modes shall be disabled during testing. For printers that default to duplex printing, the default shall be overridden and

42、 the printer shall be set to simplex for yield testing. If the printer under test uses an internal PDF interpreter, it is okay to use it as long as the printer defaults are set to not substitute fonts. If the internal interpreter is used, this shall be noted on the report. To assure that the test pa

43、ge is rendered correctly, any page size modifiers such as “Fit to Page”, “Page Centring” and font substitution shall be turned off. To further ensure that font substitution does not 2 ISO/IEC 2017 All rights reservedBS ISO/IEC 19752:2017ISO/IEC 19752:2017(E) occur, fonts shall be downloaded as TrueT

44、ype fonts if the driver provides that option. If the option exists, rendering of graphics shall be performed by the printer, not the application software or operating system. The file shall be printed using the fonts embedded in the file and shall be rendered on the page in a size corresponding to t

45、he dimensions in the test page description. Page placement modifiers, such as page centring, may be used to place the image properly on the page. If there is a question about rendering settings affecting the yield, the setting shall be noted in the report. NOTE The application software (i.e. Adobe R

46、eader TM 1) ), printer driver and printer may have page size modifier functions, such as “Fit to Page”. Make sure that all of these functions are disabled. 4.2 Sample size A combination of at least three cartridges shall be run on a combination of at least three printers (for a minimum of nine cartr

47、idges and three printers). This is the minimum number of engines and cartridges that shall be used for testing. When feasible, it is recommended that additional engines and cartridges be used in testing. When testing additional engines and cartridges above the minimum, an effort should be made to te

48、st equal number of cartridges on each engine. For example, if an additional engine is to be tested then the minimum number of cartridges to be tested would be 12 (3 cartridges 4 engines). When testing cartridges for a released product, it is recommended that cartridges and printers are procured from

49、 various sources, or selected from different production lots. The printers and cartridges shall be within their useful life as stated in their users manual. It is recommended that an additional cartridge be procured to allow for the possibility of cartridge failure during testing. 4.3 Print mode For reporting cartridge yield, the test shall be run in semi-continuous print mode simplex printing. The actual print speed will be semi-continuous because of printing being interrupted for paper