BS ISO IEC 24711-2015 Method for the determination of ink cartridge yield for colour inkjet printers and multi-function devices that contain printer components《含有打印机部件的彩色喷.pdf

1、BSI Standards Publication BS ISO/IEC 24711:2015 Method for the determination of ink cartridge yield for colour inkjet printers and multi- function devices that contain printer componentsBS ISO/IEC 24711:2015 BRITISH STANDARD National foreword This British Standard is the UK implementation of ISO/IEC

2、 24711:2015. It supersedes BS ISO/IEC 24711:2006 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee IST/3, IT Printers and Cartridges. A list of organizations represented on this committee can be obtained on request to its secretary. This publication doe

3、s not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015. Published by BSI Standards Limited 2015 ISBN 978 0 580 84298 6 ICS 37.100.10 Compliance with a British Standard cannot confer immunity from

4、legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2015. Amendments/corrigenda issued since publication Date T e x t a f f e c t e dBS ISO/IEC 24711:2015 Method for the determination of ink cartridge yield for colo

5、ur inkjet printers and multi-function devices that contain printer components Mthode pour la dtermination du rendement de cartouche dencre pour les imprimantes couleur jet dencre et pour les dispositifs multifonctionnels qui peuvent contenir des composants dimprimantes INTERNATIONAL STANDARD ISO/IEC

6、 24711 Reference number ISO/IEC 24711:2015(E) Third edition 2015-11-01 ISO/IEC 2015 BS ISO/IEC 24711:2015ii ISO/IEC 2015 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2015, Published in Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reprodu

7、ced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.

8、ISO copyright office Ch. de Blandonnet 8 CP 401 CH-1214 Vernier, Geneva, Switzerland Tel. +41 22 749 01 11 Fax +41 22 749 09 47 copyrightiso.org www.iso.org ISO/IEC 24711:2015(E)BS ISO/IEC 24711:2015ISO/IEC 24711:2015(E)Foreword iv Introduction v 1 Scope . 1 2 Normative references 1 3 T erms and def

9、initions . 1 4 Test parameters and conditions . 3 4.1 Set up . 3 4.2 Sample size . 4 4.3 Print mode 4 4.4 Print environment 5 4.5 Paper 5 4.6 Maintenance 5 4.7 Test files 6 5 Test methodology 6 5.1 Testing procedure . 6 5.1.1 Preparation . 6 5.1.2 Installation of test cartridges 6 5.1.3 Testing . 7

10、5.1.4 End of cartridge life procedure . 7 5.2 Procedure for handling streaks 7 5.2.1 Nozzle cleaning . 7 5.3 Procedure for handling a defective cartridge, printhead or printer failure . 8 5.3.1 General 8 5.3.2 Defective cartridge . 8 5.3.3 Defective printhead . 9 5.3.4 Defective printer 9 6 Determin

11、ation of the declared yield value and declaration . 9 6.1 Yield of primary cartridges 9 6.2 Yield of supplemental cartridges .10 6.3 Test data reporting .11 6.4 Declaration of the yield .12 Annex A (informative) Examples of fade .17 Annex B (informative) Examples of streaks .18 Annex C (normative) T

12、est reporting form 19 Annex D (informative) Pr oc ess flo w chart.23 Annex E (informative) Method for comparison of inkjet performance to ISO/IEC 19752 26 Bibliography .28 ISO/IEC 2015 All rights reserved iii Contents PageBS ISO/IEC 24711:2015ISO/IEC 24711:2015(E) Foreword ISO (the International Org

13、anization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the r

14、espective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of infor

15、mation technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the differ

16、ent types of document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC sh

17、all not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents). Any trade name used in this document

18、 is information given for the convenience of users and does not constitute an endorsement. For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (T

19、BT), see the following URL: Foreword Supplementary information. The committee responsible for this document is ISO/IEC JTC 1, Information technology, Subcommittee SC 28, Office equipment. This third edition cancels and replaces the second edition (ISO/IEC 24711:2007), of which it constitutes a minor

20、 revision.iv ISO/IEC 2015 All rights reservedBS ISO/IEC 24711:2015ISO/IEC 24711:2015(E) Introduction The purpose of this International Standard is to provide a process for determining the ink cartridge yield for a given colour inkjet print system (i.e. integrated ink cartridges and ink cartridges wi

21、thout integrated printheads) using a standard consumer type test suite. In the case where a cartridge set can be used in multiple printer models, only one yield test needs to be performed as long as the difference between printer models does not impact yield. NOTE A cartridge supplier may choose to

22、use more than one market identifier for a single physical cartridge. In this case, only one yield test is required as long as there are no differences in the cartridges other than market identifiers. This International Standard prescribes the following: the test method that manufacturers, test labor

23、atories, etc. use to determine ink cartridge yield; the method for determination of declared yield values from the test results; and the appropriate method of describing the yield of cartridges in documentation supplied to the consumer by the manufacturer. The cartridge yield is determined by an end

24、-of-life judgement, or signalled with either of two phenomena: fade, caused by depletion of ink in the cartridge, or automatic printing stop, caused by an ink out detection function. It is envisioned that one of the uses of this International Standard will be for the calculation of cost per page (CP

25、P). While this International Standard measures a portion of this cost, it is not used as the sole component of CPP calculation. Additional factors are considered for CPP calculations. ISO/IEC 2015 All rights reserved vBS ISO/IEC 24711:2015BS ISO/IEC 24711:2015Method for the determination of ink cart

26、ridge yield for colour inkjet printers and multi-function devices that contain printer components 1 Scope The scope of this International Standard is limited to evaluation of ink cartridge page yield for ink- containing cartridges (i.e. integrated ink cartridges and ink cartridges without integrated

27、 printheads) for colour inkjet print systems. This International Standard can also be applied to the printer component of any multifunctional device that has a digital input printing path, including multi-function devices that contain inkjet printer components. Both liquid and solid ink products can

28、 be tested using this International Standard. This International Standard is only intended for the measurement of ink cartridge page yield when printing on plain paper. No other claims can be made from this testing regarding quality, reliability, etc. This International Standard can be used to measu

29、re the yield of any cartridge that is used in a significant amount during the printing of the test suite defined in ISO/IEC 24712. This International Standard is not for use with printers whose minimum printable size is equal to or greater than A3 or for printers designed or configured to print phot

30、os (for example, maximum printable size less than A4 or a printer configuration intended for photo-only printing). In addition, it only applies to drop-on-demand printing systems. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are

31、 indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO/IEC 24712, Colour test pages for measurement of office equipment consumable yield ISO/IEC 29102, Inf

32、ormation technology Office equipment Method for the determination of ink cartridge photo yield for colour printing with inkjet printers and multi-function devices that contain inkjet printer components 3 T erms a nd definiti ons For the purposes of this document, the following terms and definitions

33、apply. 3.1 fade phenomenon in which a significant reduction in uniformity occurs due to ink depletion Note 1 to entry: In this test, fade is defined by a significant increase in lightness, L*, or a decrease in density on the bands surrounding the edge of the last page in the test page suite (Diagnos

34、tic Page). This decrease in density does not have to occur completely across the page. This comparison is made using the second diagnostic test page generated during testing (the 10th page printed). For examples of fade, please consult Annex A. INTERNATIONAL ST ANDARD ISO/IEC 24711:2015(E) ISO/IEC 2

35、015 All rights reserved 1BS ISO/IEC 24711:2015ISO/IEC 24711:2015(E) Note 2 to entry: In some printer systems, fade can occur prematurely due to the way that ink is provided to the printing system. If a printer exhibits fade, a five minute pause is allowed to provide for recovery of the ink delivery

36、system and printing can continue. If fade appears on the next suite, then the cartridge is judged at end of life and the additional diagnostic page printed is not counted in the yield calculation. If fade does not appear on the next diagnostic page, then printing can continue until the next fade or

37、ink out is encountered and the additional diagnostic pages will be counted. 3.2 streaks very thin lines of colour, other than intended in the bands surrounding the edge of the last page in the test page suite (Diagnostic Page) Note 1 to entry: Streaks differ from fade in the width and severity of in

38、crease in lightness, L*, or reduction in density. Streaks can appear for a number of reasons, thermal issues and clogged nozzles being two of the main causes. If these streaks occur in three consecutive diagnostic pages, then a streak removal operation is required. Comparisons are made using the phe

39、nomena sample provided in Annex B. 3.3 streak removal operation procedure used to restore the print performance by removing streaks Note 1 to entry: If streaks are observed on three consecutive diagnostic pages, first the printer can be left idle for five minutes. Then an additional three test suite

40、s are printed. If the streaks are still observed, then a streak removal operation is conducted according to the latest printer manufacturer documentation. Due to the significant amount of ink that is used for cleaning, the maximum permissible number of times that the streak removal operation can be

41、used on a given cartridge is prescribed in 5.2.1. Note 2 to entry: All test page suites printed during this process will be included in the page count for determining the yield. 3.4 printhead alignment operation function that aligns newly installed printheads Note 1 to entry: If it is mandatory acco

42、rding to the latest printer manufacturer documentation, this operation is performed during testing. The pages used in the alignment procedure are not counted in the measurement of yield. 3.5 ink low warning generated by the printing system when it has determined that the amount of ink is such that a

43、 cartridge change may be required soon Note 1 to entry: It does not indicate that the system is out of ink. 3.6 ink out signal generated by the printing system when the useable ink in the system is depleted and the printer stops printing 3.7 end of life condition determined by one of two mechanisms:

44、 fade (3.1) or ink out (3.6) Note 1 to entry: For cartridges with more than one colour of ink in a single cartridge, end of life is defined when the first colour within the cartridge exhibits fade or ink out. In the event that the printer can continue printing after ink out is reported, the cartridg

45、e will still be considered at end of life. 3.8 test page suite series of five pages defined in ISO/IEC 24712 that are printed consecutively as a single job, ending with a diagnostic page2 ISO/IEC 2015 All rights reservedBS ISO/IEC 24711:2015ISO/IEC 24711:2015(E) 3.9 individual cartridge yield value

46、determined by counting the number of diagnostic pages (last page of the ISO/IEC 24712 test page suite) printed between cartridge installation and end of life (3.7) and multiplying by five Note 1 to entry: If the printer stops due to ink out in the middle of a test page suite, the number of the diagn

47、ostic pages printed is counted. Then, the first diagnostic page of the remaining print job is included in the subsequent cartridge yield. Note 2 to entry: The number of test page suites counted may contain some pages that show visible fade. To simplify the testing, determination of end of life is on

48、ly made on the diagnostic page (last page of the ISO/IEC 24712 test page suite). 3.10 declared cartridge yield at or below the lower 90 % confidence bound of the mean as prescribed in 6.1 and 6.2 3.11 primary cartridge cartridge containing full density black, cyan, magenta or yellow ink or a combina

49、tion of full density cyan, magenta and yellow Note 1 to entry: These colours represent the primary inks used in a traditional four-colour printing process. 3.12 proxy cartridge primary cartridge to be utilized for estimating yield of supplemental cartridges (3.13) 3.13 supplemental cartridge cartridge other than the full density cyan, magenta, yellow and black cartridges Note 1 to entry: The determination of yield for a supplemental cartridge is made according to 6.2. 4 Test parameters and conditions 4.