BS ISO IEC 29103-2011 Information technology Office equipment Colour photo test pages for measurement of ink cartridge yield for colour photo printing《信息技术 办公设备 用于测量印制彩色照片.pdf

1、raising standards worldwide NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BSI Standards Publication BS ISO/IEC 29103:2011 Information technology Office equipment Colour photo test pages for measurement of ink cartridge yield for colour photo printingBS ISO/IEC 29103:2011 BRI

2、TISH STANDARD National foreword This British Standard is the UK implementation of ISO/IEC 29103:2011. The UK participation in its preparation was entrusted to T e c h n i c a l C o m m i t t e e I S T / 3 , I T P r i n t e r s a n d C a r t r i d g e s . A list of organizations represented on this c

3、ommittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2011 ISBN 978 0 580 57768 0 ICS 37.100.10 Compliance with a British Standard cannot confer immunity fr

4、om legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2011. Amendments issued since publication Date T e x t a f f e c t e dBS ISO/IEC 29103:2011 Reference number ISO/IEC 29103:2011(E) ISO/IEC 2011 INTERNATIONAL STANDAR

5、D ISO/IEC 29103 First edition 2011-05-01 Information technology Office equipment Colour photo test pages for measurement of ink cartridge yield for colour photo printing Technologies de linformation quipement de bureau Pages dessai pour photographies en couleurs pour le mesurage du rendement des car

6、touches dencre pour limpression de photographies en couleurs BS ISO/IEC 29103:2011 ISO/IEC 29103:2011(E) COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2011 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mec

7、hanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.i

8、so.org Published in Switzerland ii ISO/IEC 2011 All rights reservedBS ISO/IEC 29103:2011 ISO/IEC 29103:2011(E) ISO/IEC 2011 All rights reserved iiiForeword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for

9、 worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collabor

10、ate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. International Standards ar

11、e drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of the joint technical committee is to prepare International Standards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an

12、 International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rig

13、hts. ISO/IEC 29103 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 28, Office equipment. BS ISO/IEC 29103:2011 ISO/IEC 29103:2011(E) iv ISO/IEC 2011 All rights reservedIntroduction The purpose of this International Standard is to define a set of test

14、images in a common file format, JPEG, that are used in the testing of cartridge yield for printing of photographs. The defined documents are used in ISO/IEC 29102 to determine the photo yield of cartridges in an inkjet-based printing system. BS ISO/IEC 29103:2011 INTERNATIONAL STANDARD ISO/IEC 29103

15、:2011(E) ISO/IEC 2011 All rights reserved 1Information technology Office equipment Colour photo test pages for measurement of ink cartridge yield for colour photo printing IMPORTANT The electronic file of this document contains colours which are considered to be useful for the correct understanding

16、of the document. Users should therefore consider printing this document using a colour printer. 1 Scope This International Standard defines colour test pages for the measurement of consumable yield when printing photographs. These pages can be used for any printing technology including multi-functio

17、n devices that have a digital printing path, i.e. an all-in-one inkjet machine that has digital printing capabilities. This International Standard provides a set of test files in a common file format, JPEG, which would be used in the testing of consumable yield when printing photographs. The procedu

18、re for using these pages for an inkjet printing system is defined in ISO/IEC 29102. 2 Terms and definitions For the purposes of this document, the following terms and definitions apply. 2.1 photo test suite collection of the six pages defined in this International Standard 3 Test suite description T

19、he photo test suite is composed of six pages. Each one of these pages is a composite of several photo thumbnail images along with diagnostic targets. The use of thumbnails is to provide a greater coverage of the printable gamut while using actual images and not synthetic images. The files are specif

20、ied in 1800x1200 pixel and 1800x1350 pixel RGB JPEG format without any attached metadata. 3.1 Image size Worldwide there are several different “standard” paper sizes for printing snapshot photos. This International Standard alternates between 3:2 and 4:3 images to match the aspect ratio of most digi

21、tal cameras. “Fit to Print” or “Fit to Page” shall be used for testing with this image set. Test results generated using one print size cannot be converted to another size. 3.2 Diagnostic Target Description The diagnostic targets are designed to provide a simple visual tool to determine what coloran

22、t is out in a printing system. Figure 1 shows the diagnostic targets that are used in this International Standard, alternating between a horizontal orientation on even pages and a vertical orientation on odd pages. BS ISO/IEC 29103:2011 ISO/IEC 29103:2011(E) 2 ISO/IEC 2011 All rights reservedFigure

23、1 Out of colorant target BS ISO/IEC 29103:2011 ISO/IEC 29103:2011(E) ISO/IEC 2011 All rights reserved 3Annex A (normative) Test suite thumbnails BS ISO/IEC 29103:2011 ISO/IEC 29103:2011(E) 4 ISO/IEC 2011 All rights reservedBS ISO/IEC 29103:2011 ISO/IEC 29103:2011(E) ISO/IEC 2011 All rights reserved

24、5BS ISO/IEC 29103:2011 ISO/IEC 29103:2011(E) 6 ISO/IEC 2011 All rights reservedBibliography 1 ISO/IEC 29102, Information technology Office equipment Method for the determination of ink cartridge photo yield for colour printing with inkjet printers and multi-function devices that contain inkjet print

25、er components BS ISO/IEC 29103:2011BS ISO/IEC 29103:2011 ISO/IEC 29103:2011(E) ICS 37.100.10 Price based on 6 pages ISO/IEC 2011 All rights reserved This page deliberately left blankBSI is the independent national body responsible for preparing British Standards and other standards-related publicati

26、ons, information and services. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. British Standards Institution (BSI) raising standards worldwide BSI Group Headquarters 389 Chiswick High Road London W4 4AL UK Tel +44 (0)20 8996 9001 Fa

27、x +44 (0)20 8996 7001 British Standards are updated by amendment or revision. Users of British Stan- dards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and serv- ices. We would be grateful if anyone findin

28、g an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical com- mittee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001 BSI offers Members an individual updating service called

29、 PLUS which ensures that subscribers automatically receive the latest editions of standards. Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001 Email: Buying standards You may buy PDF and hard copy versions of standards directly using a credit card from the BSI Shop on the website In addition all o

30、rders for BSI, international and foreign standards publications can be addressed to BSI Customer Services. Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001 Email: In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published

31、as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Knowledge Centre. Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005 Email: Various BSI electronic information services ar

32、e also available which give details on all its products and services. Tel: +44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: BSI Subscribing Members are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other

33、 benefits contact Membership Ad- ministration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via British Standards Online can be found at Further information about BSI is available on the BSI website at www.bsi- Copyright Copyrig

34、ht subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Ex- cept as permitted under the Copyright, Designs and Patents Act 1988 no ex- tract may be reproduced, stored in a retrieval system or transmitted in any fo

35、rm or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copy- right & Licensing Manager. Tel: +44 (0)20 8996 7070 Email: