BS ISO IEC 29109-4-2010 Information technology - Conformance testing methodology for biometric data interchange formats defined in ISO IEC 19794 Finger image data《信息技术 IS.pdf

1、BS ISO/IEC 29109-4:2010 ICS 35.040 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BRITISH STANDARD Information technology Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 Part 4: Finger image data Incorporating corrigendum Octobe

2、r 2011National foreword This British Standard is the UK implementation of ISO/IEC 29109-4:2010, incorporating corrigendum October 2011. The start and finish of text introduced or altered by corrigendum is indicated in the text by tags. Text altered by ISO/IEC corrigendum October 2011 is indicated in

3、 the text by . The UK participation in its preparation was entrusted to Technical Committee IST/44, Biometrics. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.

4、Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. BS ISO/IEC 29109-4:2010 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2010 BSI 2011 ISBN 978 0 580 7

5、4669 7 Amendments/corrigenda issued since publication Date Comments 30 November 2011 Implementation of ISO/IEC corrigendum October 2011 Reference number ISO/IEC 29109-4:2010(E) ISO/IEC 2010INTERNATIONAL STANDARD ISO/IEC 29109-4 First edition 2010-05-01 Information technology Conformance testing meth

6、odology for biometric data interchange formats defined in ISO/IEC 19794 Part 4: Finger image data Technologies de linformation Mthodologie dessai de conformit pour les formats dinterchange de donnes biomtriques dfinis dans lISO/CEI 19794 Partie 4: Donnes dimage du doigt PDF disclaimer This PDF file

7、may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the re

8、sponsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-crea

9、tion parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. COPYRIGHT PROTECTED DOCUMENT ISO/IE

10、C 2010 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the

11、 country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii BS ISO/IEC 29109-4:2010 ISO/IEC 29109-4:2010 (E) ISO 2011 iiiContents Page Foreword iv Introduction.v 1 S

12、cope1 2 Conformance .1 3 Normative references2 4 Terms and definitions .2 5 Symbols and abbreviated terms 2 6 Conformance testing methodology.2 6.1 Table of requirements in the base standard.2 6.2 Table of test assertions 7 BS ISO/IEC 29109-4:2010 ISO/IEC 29109-4:2010 (E) ISO 2011 iv Foreword ISO (t

13、he International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees

14、established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. I

15、n the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of the joint technical committee is to prepare International Standar

16、ds. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is drawn to the possibility that some of the elements

17、of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. ISO/IEC 29109 consists of the following parts, under the general title Information technology Conformance testing methodology for biometric data interchange

18、formats defined in ISO/IEC 19794: Part 1: Generalized conformance testing methodology Part 2: Finger minutiae data Part 4: Finger image data Part 5: Face image data Part 6: Iris image data Part 8: Finger pattern skeletal data Part 9: Vascular image data Part 10: Hand geometry silhouette data The fol

19、lowing part is under preparation: Part 7: Signature/sign time series data BS ISO/IEC 29109-4:2010 ISO/IEC 29109-4:2010 (E) ISO 2011 vIntroduction ISO/IEC 19794-4:2005 specifies a data record interchange format for recording, storing, and transmitting one or more finger images within a common biometr

20、ic exchange formats framework (CBEFF) data structure. Each image is accompanied by image-specific metadata contained in a header record. This part of ISO/IEC 29109 establishes tests for checking the correctness of the binary record. The objective of ISO/IEC 19794-4:2005 cannot be completely achieved

21、 until biometric products can be tested to determine whether they conform to those specifications. Conforming implementations are a necessary prerequisite for achieving interoperability among implementations; therefore there is a need for a standardized conformance testing methodology, test assertio

22、ns, and test procedures as applicable to specific modalities addressed by each part of ISO/IEC 19794. The test assertions will cover, as far as practical, the ISO/IEC 19794 requirements (covering the most critical features), so that the conformity results produced by the test suites will reflect the

23、 real degree of conformity of the implementations to ISO/IEC 19794 data interchange format records. This is the motivation for the development of this conformance testing methodology. This part of ISO/IEC 29109 supports those applications that require use of finger image data according to ISO/IEC 19

24、794-4:2005. It defines a testing methodology to ensure conformance of a vendors application or service to ISO/IEC 19794-4:2005. Thus this part of ISO/IEC 29109 is intended to establish elements of the conformance testing methodology framework that are specific to the finger and palm image-based data

25、 record requirements of ISO/IEC 19794-4:2005 conformance testing, define requirements and guidelines for specifying conformance test suites and related test methods for measuring conformity of products and services to the finger image data record requirements of ISO/IEC 19794-4:2005, and define test

26、ing and reporting procedures to be followed before, during, and after conformance testing. This part of ISO/IEC 29109 is applicable to the development and use of conformity test method specifications, conformity test suites for ISO/IEC 19794-4:2005 records, and conformance testing programs for ISO/I

27、EC 19794-4:2005 conformant products. It is intended primarily for use by testing organizations, but may be applied by developers and users of test method specifications and test method implementations. The table of test assertions (Clause 6.2, Table 2) specifies test assertions for the conformance r

28、equirements of ISO/IEC 19794-4:2005. BS ISO/IEC 29109-4:2010 ISO/IEC 29109-4:2010 (E) ISO 2011 BS ISO/IEC 29109-4:2010 BS ISO/IEC 29109-4:2010 ISO/IEC 29109-4:2010 (E) ISO 2011 INTERNATIONAL STANDARD1Information technology Conformance testing methodology for biometric data interchange formats define

29、d in ISO/IEC 19794 Part 4: Finger image data 1 Scope This part of ISO/IEC 29109 specifies elements of conformance testing methodology, test assertions, and test procedures as applicable to ISO/IEC 19794-4. It establishes test assertions of the structure of the finger image data format as specified i

30、n ISO/IEC 19794-4:2005 (Type A Level 1 as defined in ISO/IEC 29109-1:2009), test asssertions of internal consistency by checking the types of values that may be contained within each field (Type A Level 2 as defined in ISO/IEC 29109-1:2009), tests of semantic assertions (Type A Level 3 as defined in

31、 ISO/IEC 29109-1:2009). It does not establish tests of conformance of CBEFF structures required by ISO/IEC 19794-4:2005, tests of other characteristics of biometric products or other types of testing of biometric products (e.g. acceptance, performance, robustness, security), tests of conformance of

32、systems that do not produce ISO/IEC 19794-4:2005 records. 2 Conformance Biometric data interchange format conformance tests conform to this part of ISO/IEC 29109 if they satisfy all of the normative requirements related to Clause 6. Specifically, they shall use the test methodology specified in Clau

33、ses 6, 7 and 8 of ISO/IEC 29109-1:2009, and all Level 1 and Level 2 tests shall use the assertions defined in Table 2 of this part of ISO/IEC 29109. Implementations of ISO/IEC19794-4:2005 tested according to the methodology specified shall be able to claim conformance only to those biometric data re

34、cord (BDB) requirements specified in ISO/IEC 19794-4:2005 that are tested by the test methods established by this methodology. Implementations of ISO/IEC 19794-4:2005 do not necessarily need to conform to all possible aspects of ISO/IEC 19794-4:2005, but only to those ISO/IEC 19794-4:2005 requiremen

35、ts that are claimed to be supported by the implementation in an implementation conformance statement (ICS), filled out in accordance with Clause 8 of ISO/IEC 29109-1:2009 and Table 1 of this part of ISO/IEC 29109. ISO/IEC 29109-4:2010 (E) ISO 2011 BS ISO/IEC 29109-4:2010 2 3 Normative references The

36、 following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO/IEC 19794-4:2005, Information technology Biometr

37、ic data interchange formats Part 4: Finger image data ISO/IEC 29109-1:2009, Information technology Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 Part 1: Generalized conformance testing methodology 4 Terms and definitions For the purposes of this docu

38、ment, the terms and definitions given in ISO/IEC 29109-1 apply. 5 Symbols and abbreviated terms For the purposes of this document, the symbols and abbreviated terms given in ISO/IEC 29109-1 apply. 6 Conformance testing methodology The testing methodology specified in Clauses 6, 7 and 8 of ISO/IEC 29

39、109-1:2009 shall apply. The content of the tables below is based on the conformance testing methodology outlined in ISO/IEC 29109-1:2009 and shall only be used in the context of that testing methodology. 6.1 Table of requirements in the base standard The normative requirements of ISO/IEC 19794-4:200

40、5 are listed in Table 1. The supplier of the IUT can explain which optional components of the standard are supported and the testing laboratory can note the results of the test. Table 1 Requirements of the base standard (ISO/IEC 19794-4:2005) Require- ment identifier Reference in base standard Requi

41、rement summary Level Status IUT support Supported range Test result R-1 4.15 Information contained in a transaction shall be applicable to a single subject. 3C O-1 N/A N/A R-2 6.1 Each item of information, field, or logical record shall contain one or more bytes of data. 3C O-1 N/A N/A R-3 6.1 The o

42、rder for transmission shall also be the most significant byte first and least significant byte last. 3C O-1 N/A N/A R-4 6.1 Within a byte, the order of transmission shall be the most significant bit first and the least significant bit last. 3C O-1 N/A N/A R-5 6.2 Each image as presented in accordanc

43、e with this format standard shall appear to have been captured in an upright position and approximately centered horizontally in the field of view. 3C O-1 N/A N/A BS ISO/IEC 29109-4:2010 ISO/IEC 29109-4:2010 (E) ISO 2011 3Table 1 (continued) Require- ment identifier Reference in base standard Requir

44、ement summary Level Status IUT support Supported range Test result R-6 6.2 The recorded image data shall appear to be the result of a scanning of a conventional inked impression of a fingerprint. 3C O-1 N/A N/A R-7 6.2 The scanning sequence (and recorded data) shall appear to have been from left- to

45、-right, progressing from top-to-bottom of the fingerprint or palm print. 3C O-1 N/A N/A R-8 6.2 For the purpose of describing the position of each pixel within an image to be exchanged, a pair of reference axes shall be used. 3C O-1 N/A N/A R-9 6.2 The origin of the axes, pixel location (0,0), shall

46、 be located at the upper left- hand corner of each image. 3C O-1 N/A N/A R-10 6.2 The x-coordinate (horizontal) position shall increase positively from the origin to the right side of the image. 3C O-1 N/A N/A R-11 6.2 The y-coordinate (vertical) position shall increase positively from the origin to

47、 the bottom of the image. 3C O-1 N/A N/A R-12 7.2 For all quality levels, the finger image shall be represented using square pixels, in which the horizontal and vertical dimensions of the pixels are equal. 3C O-1 N/A N/A R-13 7.3 The grayscale precision of the pixel data shall be specified in terms

48、of the pixel depth or the number of bits used to represent the grayscale value of a pixel. 3C O-1 N/A N/A R-14 7.3 For grayscale data, the minimum value that can be assigned to a “black” pixel shall be zero. 3C O-1 N/A N/A R-15 7.3 The maximum value that can be assigned to a “white” pixel shall be the grayscale value with all of its bits of precision set to “1”. 3C O-1 N/A N/A R-16 7.4 The image data portion of a record for an uncompressed grayscale image shall contain a set of raw pixel information. 3C O-1 N/A N/A R-17 7.4 Using a pixel depth of 8 bits (25