1、BSI Standards Publication BS ISO/IEC 29155-3:2015 Systems and software engineering Information technology project performance benchmarking framework Part 3: Guidance for reportingBS ISO/IEC 29155-3:2015 BRITISH STANDARD National foreword This British Standard is the UK implementation of ISO/IEC 2915
2、5-3:2015. The UK participation in its preparation was entrusted to Technical Committee IST/15, Software and systems engineering. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provision
3、s of a contract. Users are responsible for its correct application. The British Standards Institution 2015. Published by BSI Standards Limited 2015 ISBN 978 0 580 82637 5 ICS 35.080 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published
4、under the authority of the Standards Policy and Strategy Committee on 30 November 2015. Amendments/corrigenda issued since publication Date T e x t a f f e c t e dBS ISO/IEC 29155-3:2015 Systems and software engineering Information technology project performance benchmarking framework Part 3: Guidan
5、ce for reporting Ingnierie des systmes et du logiciel Cadre de conduite de tests de performance de projet de technologies de linformation Partie 3: Directives de rapport INTERNATIONAL STANDARD ISO/IEC 29155-3 Reference number ISO/IEC 29155-3:2015(E) First edition 2015-11-15 ISO/IEC 2015 BS ISO/IEC 2
6、9155-3:2015ii ISO/IEC 2015 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2015, Published in Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including pho
7、tocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Ch. de Blandonnet 8 CP 401 CH-1214 Vernier, Geneva, Switzerland Tel. +41
8、22 749 01 11 Fax +41 22 749 09 47 copyrightiso.org www.iso.org ISO/IEC 29155-3:2015(E)BS ISO/IEC 29155-3:2015ISO/IEC 29155-3:2015(E)Foreword iv Introduction v 1 Scope . 1 2 Normative references 1 3 T erms and definitions . 2 4 Abbreviated terms 2 5 Roles of reports in the IT project performance benc
9、hmarking framework .2 5.1 General quality requirements for the benchmarking reports 2 5.2 Identification of reports within benchmarking framework. 3 5.2.1 Benchmarking outcomes and types of reports 3 5.2.2 Reporting related benchmarking activities 3 5.3 Relationships between benchmarking activities
10、and reports 4 6 General requirements and guidance for reporting process 5 6.1 Planning phase 5 6.2 Executing phase . 6 6.3 Supporting phase 6 6.3.1 Support for reports and deliverables . 6 6.3.2 Support for benchmarking experience base 6 7 Requirements and guidance for contents of reports within ben
11、chmarking framework 6 7.1 General requirements for reports 6 7.1.1 Requirements for structure and wording 6 7.1.2 Requirements for administrative information of reports 7 7.2 Activity-specific requirements and guidance for reports 7 7.2.1 Reports of “Conduct benchmarking” activity 7 7.2.2 Reports of
12、 “Maintain repository” activity 8 7.2.3 Reports of “Issue benchmarks” activity . 8 Annex A (informative) Framework model of IT project performance benchmarking in ISO/ IEC 29155-1 .10 Bibliography .14 ISO/IEC 2015 All rights reserved iii Contents PageBS ISO/IEC 29155-3:2015ISO/IEC 29155-3:2015(E) Fo
13、reword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technica
14、l committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part i
15、n the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approv
16、al criteria needed for the different types of document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives). Attention is drawn to the possibility that some of the elements of this document may be the subject
17、 of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents). Any
18、 trade name used in this document is information given for the convenience of users and does not constitute an endorsement. For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in t
19、he Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information The committee responsible for this document is ISO/IEC JTC1, Information technology, Subcommittee SC 7, Software and systems engineering. ISO/IEC 29155 consists of the following parts, under the general
20、title Systems and software engineering Information technology project performance benchmarking framework: Part 1: Concepts and definitions Part 2: Requirements for benchmarking Part 3: Guidance for reporting Part 4: Guidance for data collection and maintenance Further parts might follow. Annex A of
21、this part of ISO/IEC 29155 is for information only.iv ISO/IEC 2015 All rights reservedBS ISO/IEC 29155-3:2015ISO/IEC 29155-3:2015(E) Introduction Benchmarking is an activity of comparing objects of interest to each other or against a benchmark to evaluate characteristic(s). In the context of the ISO
22、/IEC 29155 series, the “object of interest” is the performance of information technology (IT) project, and the characteristic is a particular aspect of an IT project such as productivity. The benchmarking is one of the fastest-growing techniques in the area of IT project management. Instances of IT
23、project performance benchmarking are initiated and conducted for various reasons. Among the most common reasons are a) the need to compare project productivity between similar industries, b) the need to compare productivity between different project types and technologies, c) the need to find the mo
24、st effective targets for IT development process improvement, d) the need to compare productivity between different suppliers, e) the need to improve project management maturity, f) the need to improve project estimation capability. Much has been written regarding the trials of establishing IT projec
25、t performance benchmarking, and statistics bear witness to the high failure rate of measurement and benchmarking programs. The most probable causes for failure have been disappointment in the benchmarking outcomes due to a lack of alignment between the selected measurements and business goals, and t
26、he misunderstanding of project level measurements in relation to program and portfolio management levels. When there is no alignment between executed measurements and provided outcomes, unnecessary effort is required from the IT project teams collecting the project data. The result is decreased moti
27、vation to continue and institutionalize benchmarking. As shown in Figure 1, ISO/IEC 29155 series consists of multiple parts: Part 1 provides the overall framework model for IT project performance benchmarking. It consists of activities and components that are necessary to successfully identify, defi
28、ne, select, apply, and improve benchmarking; Part 2 prescribes the required tasks in individual benchmarking activities that are necessary to execute various activities to conduct and/or support successful benchmarking in an organization; Part 3 prescribes the guidance for reporting processes and co
29、ntents of typical reports; Part 4 provides guidance for the activities to collect IT project data to be entered into and maintained in a benchmarking repository. Further parts might follow. This part of ISO/IEC 29155 is intended to provide guidance for reporting process and contents of typical repor
30、ts in IT project performance benchmarking to produce high-quality deliverables (e.g. the benchmarking report of an instance of benchmarking, the explanatory report for issued benchmarks, and the explanatory report for released benchmarking repository) which include sufficient information to avoid mi
31、sunderstanding or inappropriate usage. ISO/IEC 2015 All rights reserved vBS ISO/IEC 29155-3:2015ISO/IEC 29155-3:2015(E) RESOURCES INPUT OUTPUT PROCESS CONTROLS Part 1: Concepts and deinitions Part 4: Guidance for data collection and maintenance Part 2: Requirements for benchmarking Part 3: Guidance
32、for reporting Benchmarking domains Data exchange Data characteristics Data analysis Figure 1 IT project performance benchmarking standards overviewvi ISO/IEC 2015 All rights reservedBS ISO/IEC 29155-3:2015INTERNATIONAL ST ANDARD ISO/IEC 29155-3:2015(E) Systems and software engineering Information te
33、chnology project performance benchmarking framework Part 3: Guidance for reporting 1 Scope This part of ISO/IEC 29155 provides general requirements and guidance for reporting processes and contents of typical reports within benchmarking activities of “the information technology (IT) project performa
34、nce benchmarking framework” by prescribing: requirements and guidance for the reporting processes within the benchmarking framework; requirements and guidance for the contents of reports. This part of ISO/IEC 29155 focuses on three major activities, i.e. “conduct benchmarking”, “maintain repository”
35、, and “issue benchmarks” activities. NOTE 1 These activities are selected, not only because the importance of the outcomes of these activities, but also the outcomes of these activities are the direct input for benchmarking users who execute “core benchmarking” activities. In addition, benchmarking
36、users are not usually so deeply involved to these activities even though they need in-deep information to understand the benchmarking results or to select appropriate data (i.e. benchmarking repository and benchmarks). This part of ISO/IEC 29155 also focuses on two types of reports in the benchmarki
37、ng framework: a) the benchmarking report, that describes the results of an instance of benchmarking; b) the explanatory report, that provides complementary information about the released benchmarking repository or benchmark(s). This part of ISO/IEC 29155 is intended for use by stakeholder(s) of IT p
38、roject performance benchmarking (e.g. benchmarking user, benchmark provider, and benchmarking service provider). NOTE 2 The following are examples of how this part of ISO/IEC 29155 can be used: by a systems and software acquirer (or a third-party agent), to define, order, obtain and evaluate an acce
39、ptable and creditable benchmarking report; by a benchmarking service provider, to produce a high-quality benchmarking report; by a benchmark provider, to provide complementary information about the released benchmarking repository or issued benchmarks. It is out of the scope of this part of ISO/IEC
40、29115 to prescribe the particular names, formats, or explicit contents of the reports of the benchmarking activities. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only
41、 the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO/IEC 2015 All rights reserved 1BS ISO/IEC 29155-3:2015ISO/IEC 29155-3:2015(E) ISO/IEC 29155-1, Systems and software engineering Information technology project perf
42、ormance benchmarking framework Part 1: Concepts and definitions ISO/IEC 29155-2, Systems and software engineering Information technology project performance benchmarking framework Part 2: Requirements for benchmarking 3 T erms a nd definiti ons For the purposes of this document, the terms and defini
43、tions given in ISO/IEC 29155-1, ISO/IEC 29155- 2, and the following apply. 3.1 benchmarking analyst person or organization that executes “conduct benchmarking” activity 3.2 benchmarking report document of the results of an instance of benchmarking Note 1 to entry: Document usually consists of variou
44、s formats (e.g. textual descriptions, numeric values, statistical charts and tables), and is exchanged via various media (e.g. electronic documents, electronic data set, printed documents, and embedded data within specific computer software). 3.3 core report document for providing descriptions of th
45、e process and outcomes of the benchmarking activity Note 1 to entry: Two kinds of core reports (i.e. executive summary and detailed report) are often produced for reporting results of an instance of benchmarking activity. 3.4 explanatory report document attached to a product for providing complement
46、ary information in order to assist understanding and to avoid inappropriate usage of the product Note 1 to entry: Examples of an explanatory report are data element definitions, data demographics, data source information which are attached to benchmarking repositories or benchmarks. Note 2 to entry:
47、 Examples of the product are benchmarking repository, benchmark(s), or software tools to support benchmarking activities. 4 Abbreviated terms IT Information Technology 5 Roles of reports in the IT project performance benchmarking framework 5.1 General quality requirements for the benchmarking report
48、s As shown in Figure A.1, IT project performance benchmarking framework in ISO/IEC 29155 series consists of two categories of benchmarking activities: core benchmarking activities (i.e. “conduct benchmarking” and “utilize benchmarking results”); supporting activities (i.e. “maintain repository”, “is
49、sue benchmarks”, “measure IT project”, “submit data”, and “provide instruments”). NOTE 1 See ISO/IEC 291551 and ISO/IEC 291552 for more information about activities, processes and tasks in the benchmarking framework.2 ISO/IEC 2015 All rights reservedBS ISO/IEC 29155-3:2015ISO/IEC 29155-3:2015(E) Since individual benchmarking activities require different expertise, these activities are usually role- shared by multiple stakeholders (e.g. benchmarking user, be
copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1