BS ISO IEC 29341-24-1-2017 Information technology UPnP Device Architecture Internet gateway device control protocol Level 2 Internet gateway device《信息技术 UPnP设备体系结构 互联网网关设备.pdf

1、Information technology UPnP Device Architecture Part 24-1: Internet gateway device control protocol Level 2 Internet gateway device BS ISO/IEC 29341-24-1:2017 BSI Standards Publication WB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Information technology UPnP Device Architecture Part 24-1:

2、Internet gateway device control protocol Level 2 Internet gateway device Technologies de linformation Architecture de dispositif UPnP Partie 24-1: Protocole de contrle de dispositif de passerelle Internet Niveau 2 Dispositif de passerelle Internet INTERNATIONAL STANDARD ISO/IEC 29341-24-1 Reference

3、number ISO/IEC 29341-24-1:2017(E) First edition 2017-09 ISO/IEC 2017 National foreword This British Standard is the UK implementation of ISO/IEC 29341-24-1:2017. The UK participation in its preparation was entrusted to Technical Committee ICT/-/1, Information systems co-ordination. A list of organiz

4、ations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017

5、 ISBN 978 0 580 90851 4 ICS 35.200 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2017. Amendments/corrigenda issued since publication Date Text a

6、ffected BRITISH STANDARD BS ISO/IEC 29341241:2017Information technology UPnP Device Architecture Part 24-1: Internet gateway device control protocol Level 2 Internet gateway device Technologies de linformation Architecture de dispositif UPnP Partie 24-1: Protocole de contrle de dispositif de passere

7、lle Internet Niveau 2 Dispositif de passerelle Internet INTERNATIONAL STANDARD ISO/IEC 29341-24-1 Reference number ISO/IEC 29341-24-1:2017(E) First edition 2017-09 ISO/IEC 2017 BS ISO/IEC 29341241:2017 ii ISO/IEC 2017 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2017, Published in Switze

8、rland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be req

9、uested from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Ch. de Blandonnet 8 CP 401 CH-1214 Vernier, Geneva, Switzerland Tel. +41 22 749 01 11 Fax +41 22 749 09 47 copyrightiso.org www.iso.org ISO/IEC 29341-24-1:2017(E) BS ISO/IEC 29341241

10、:2017 ii ISO/IEC 2017 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2017, Published in Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocop

11、ying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Ch. de Blandonnet 8 CP 401 CH-1214 Vernier, Geneva, Switzerland Tel. +41 22 74

12、9 01 11 Fax +41 22 749 09 47 copyrightiso.org www.iso.org ISO/IEC 29341-24-1:2017(E) ISO/IEC 29341-24-1:2017(E) ISO/IEC 2017 All rights reserved iii CONTENTS Introduction . 1 1 Scope 1 2 Normative references . 2 3 Terms, definitions, symbols and abbreviated terms . 3 4 Device Model . 4 4.1 Device Ty

13、pe . 4 4.2 Requirements for an Internet Gateway Device . 4 4.3 Device Architecture . 5 4.3.1 Device Requirements 6 4.3.2 Relationships Between Services 7 4.4 Security policies . 8 4.4.1 Access control and user roles 8 4.4.2 General policies 8 4.4.3 WANIPConnection:2 8 4.4.4 WANPPPConnection:1 . 10 4

14、.4.5 WANIPv6FirewallControl:1 . 12 4.4.6 LANHostConfigManagement:1 13 4.4.7 Layer3Forwarding:1 . 13 4.4.8 WANEthernetLinkConfig:1 13 4.4.9 WANCableLinkConfig:1 14 4.4.10 WANDSLLinkConfig:1 14 4.4.11 WANCommonInterfaceConfig:1 14 4.4.12 WANPOTSLinkConfig:1 15 5 XML Device Description 16 6 Test . 18 A

15、nnex A Theory of Operation 19 Figure 1 InternetGatewayDevice with LAN and WAN Interfaces 2 Figure 2 InternetGatewayDevice Devices and Services Hierarchy . 5 Table 1 Device Requirements 5 Table 2 Service Descriptions 6 Table 3 Recommended access levels for WANIPConnection:2 actions 8 Table 4 Recommen

16、ded access levels for WANPPPConnection:1 actions . 10 Table 5 Recommended access levels for WANIPv6FirewallControl:1 actions 12 Table 6 Recommended access levels for LANHostConfigManagement:1 actions 13 Table 7 Recommended access levels for Layer3Forwarding:1 actions 13 Table 8 Recommended access le

17、vels for WANEthernetLinkConfig:1 actions 13 Table 9 Recommended access levels for WANCableLinkConfig:1 actions 14 Table 10 Recommended access levels for WANDSLLinkConfig:1 actions . 14 Table 11 Recommended access levels for WANCommonInterfaceConfig:1 actions . 14 BS ISO/IEC 29341241:2017ISO/IEC 2934

18、1-24-1:2017(E) iv ISO/IEC 2017 All rights reserved Table 12 Recommended access levels for WANPOTSLinkConfig:1 actions 15 BS ISO/IEC 29341241:2017ISO/IEC 29341-24-1:2017(E) iv ISO/IEC 2017 All rights reserved Table 12 Recommended access levels for WANPOTSLinkConfig:1 actions 15 ISO/IEC 29341-24-1:201

19、7(E) ISO/IEC 2017 All rights reserved v Foreword ISO (the International Organization for Standardization) and IE C (the International Electrotechnical Commission) form the specialized system for wo rldwide standardization. National bodies that are members of ISO or IEC participate in t he developmen

20、t of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other inte rnational organizations, governmental and nongovernmental,

21、in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directive

22、s, Part 1. In particular the different approval criteria needed for the different types of document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see http:/www.iso.org/directives). Attention is drawn to the possibility that some

23、of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent d

24、eclarations received (see www.iso.org/patents). Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement. For an explanation on the voluntary nature of Standard, the meaning of the ISO specific terms and expressions related to conf

25、ormity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword Supplementary information ISO/IEC 29341241 was prepared by UPnP Forum and adopted, under the PAS procedure, by joint technical committee ISO/I

26、EC JTC 1, Information technology, in parallel with its approval by national bodies of ISO and IEC. The list of all currently available parts of ISO/IEC 29341 series, under the general title Information technology UPnP Device Architecture, can be found on the ISO web site. BS ISO/IEC 29341241:2017ISO

27、/IEC 29341-24-1:2017(E) vi ISO/IEC 2017 All rights reserved Introduction ISO and IEC draw attention to the fact that it is claimed that compliance with this document may involve the use of patents as indicated below. ISO and IEC take no position concerning the evidence, validity and scope of these p

28、atent rights. The holders of -these patent rights have assured ISO and IEC that they are willing to negotiate licenses under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statements of the holders of these patent rights are register

29、ed with ISO and IEC. Intel Corporation has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Intel Corporation Standards Licensing Department 5200 NE Elam Young Parkway MS: JFS-98 USA Hillsboro, Oregon 97124 Microsoft Corporation has informed

30、IEC and ISO that it has patent applications or granted patents as listed below: 6101499 / US; 6687755 / US; 6910068 / US; 7130895 / US; 6725281 / US; 7089307 / US; 7069312 / US; 10/783 524 /US Information may be obtained from: Microsoft Corporation One Microsoft Way USA Redmond WA 98052 Philips Inte

31、rnational B.V. has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Philips International B.V. IP 6687755 / US; 6910068 / US; 7130895 / US; 6725281 / US; 7089307 / US; 7069312 / US; 10/783 524 /US Information may be obtained from: Microsoft C

32、orporation One Microsoft Way USA Redmond WA 98052 Philips International B.V. has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Philips International B.V. IP 6 170 007 / US; 6 139 177 / US; 6 529 936 / US; 6 470 339 / US; 6 571 388 / US; 6

33、205 466 / US Information may be obtained from: Hewlett Packard Company 1501 Page Mill Road USA Palo Alto, CA 94304 Samsung Electronics Co. Ltd. has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Digital Media Business, Samsung Electronics C

34、o. Ltd. 416 Maetan-3 Dong, Yeongtang-Gu, KR Suwon City 443-742 Huawei Technologies Co., Ltd. has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Huawei Technologies Co., Ltd. Administration Building, Bantian Longgang District Shenzhen China

35、518129 Qualcomm Incorporated has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Qualcomm Incorporated 5775 Morehouse Drive San Diego, CA USA 92121 Telecom Italia S.p.A.has informed IEC and ISO that it has patent applications or granted pate

36、nts. Information may be obtained from: Telecom Italia S.p.A. Via Reiss Romoli, 274 Turin - Italy 10148 Cisco Systems informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA USA 95134 Attention i

37、s drawn to the possibility that some of the elements of this document may be the subject of patent rights other than those identified above. ISO and IEC shall not be held responsible for identifying any or all such patent rights. BS ISO/IEC 29341241:2017ISO/IEC 29341-24-1:2017(E) viii ISO/IEC 2017 A

38、ll rights reserved Original UPnP Document Reference may be made in this document to original UPnP documents. These references are retained in order to maintain consistency between the specifications as published by ISO/IEC and by UPnP Implementers Corporation and later by UPnP Forum. The following t

39、able indicates the original UPnP document titles and the corresponding part of ISO/IEC 29341: UPnP Document Title ISO/IEC 29341 Part UPnP Device Architecture 1.0 ISO/IEC 29341-1:2008 UPnP Device Architecture Version 1.0 ISO/IEC 29341-1:2011 UPnP Device Architecture 1.1 ISO/IEC 29341-1-1:2011 UPnP De

40、vice Architecture 2.0 ISO/IEC 29341-1-2 UPnP Basic:1 Device ISO/IEC 29341-2 UPnP AV Architecture:1 ISO/IEC 29341-3-1:2008 UPnP AV Architecture:1 ISO/IEC 29341-3-1:2011 UPnP AVTransport:1 Service ISO/IEC 29341-3-10 UPnP ConnectionManager:1 Service ISO/IEC 29341-3-11 UPnP ContentDirectory:1 Service IS

41、O/IEC 29341-3-12 UPnP RenderingControl:1 Service ISO/IEC 29341-3-13 UPnP MediaRenderer:1 Device ISO/IEC 29341-3-2 UPnP MediaRenderer:2 Device ISO/IEC 29341-3-2:2011 UPnP MediaServer:1 Device ISO/IEC 29341-3-3 UPnP AVTransport:2 Service ISO/IEC 29341-4-10:2008 UPnP AVTransport:2 Service ISO/IEC 29341

42、-4-10:2011 UPnP ConnectionManager:2 Service ISO/IEC 29341-4-11:2008 UPnP ConnectionManager:2 Service ISO/IEC 29341-4-11:2011 UPnP ContentDirectory:2 Service ISO/IEC 29341-4-12 UPnP RenderingControl:2 Service ISO/IEC 29341-4-13:2008 UPnP RenderingControl:2 Service ISO/IEC 29341-4-13:2011 UPnP Schedul

43、edRecording:1 ISO/IEC 29341-4-14 UPnP ScheduledRecording:2 ISO/IEC 29341-4-14:2011 UPnP MediaRenderer:2 Device ISO/IEC 29341-4-2 UPnP MediaServer:2 Device ISO/IEC 29341-4-3 UPnP AV Datastructure Template:1 ISO/IEC 29341-4-4:2008 UPnP AV Datastructure Template:1 ISO/IEC 29341-4-4:2011 UPnP DigitalSec

44、urityCamera:1 Device ISO/IEC 29341-5-1 UPnP DigitalSecurityCameraMotionImage:1 Service ISO/IEC 29341-5-10 UPnP DigitalSecurityCameraSettings:1 Service ISO/IEC 29341-5-11 UPnP DigitalSecurityCameraStillImage:1 Service ISO/IEC 29341-5-12 UPnP HVAC_System:1 Device ISO/IEC 29341-6-1 UPnP ControlValve:1

45、Service ISO/IEC 29341-6-10 UPnP HVAC_FanOperatingMode:1 Service ISO/IEC 29341-6-11 UPnP FanSpeed:1 Service ISO/IEC 29341-6-12 UPnP HouseStatus:1 Service ISO/IEC 29341-6-13 UPnP HVAC_SetpointSchedule:1 Service ISO/IEC 29341-6-14 UPnP TemperatureSensor:1 Service ISO/IEC 29341-6-15 UPnP TemperatureSetpoint:1 Service ISO/IEC 29341-6-16 UPnP HVAC_UserOperatingMode:1 Service ISO/IEC 29341-6-17 UPnP HVAC_ZoneThermostat:1 Device ISO/IEC 29341-6-2 BS ISO/IEC 29341241:2017