BS ISO IEC 29341-26-2-2017 Information technology UPnP Device Architecture Telephony device control protocol Level 2 Telephony client device《信息技术 UPnP设备体系结构 电话设备控制协议 第2级 电.pdf

1、Information technology UPnP Device Architecture Part 26-2: Telephony device control protocol Level 2 Telephony client device BS ISO/IEC 29341-26-2:2017 BSI Standards Publication WB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Information technology UPnP Device Architecture Part 26-2: Telepho

2、ny device control protocol Level 2 Telephony client device Technologies de linformation Architecture de dispositif UPnP Partie 26-2: Protocole de contrle de dispositif de tlphonie Niveau 2 Dispositif de client de tlphonie INTERNATIONAL STANDARD ISO/IEC 29341-26-2 Reference number ISO/IEC 29341-26-2:

3、2017(E) First edition 2017-09 ISO/IEC 2017 National foreword This British Standard is the UK implementation of ISO/IEC 29341-26-2:2017. The UK participation in its preparation was entrusted to Technical Committee ICT/-/1, Information systems co-ordination. A list of organizations represented on this

4、 committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017 ISBN 978 0 580 90866 8 IC

5、S 35.200 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2017. Amendments/corrigenda issued since publication Date Text affected BRITISH STANDARD B

6、S ISO/IEC 29341262:2017Information technology UPnP Device Architecture Part 26-2: Telephony device control protocol Level 2 Telephony client device Technologies de linformation Architecture de dispositif UPnP Partie 26-2: Protocole de contrle de dispositif de tlphonie Niveau 2 Dispositif de client d

7、e tlphonie INTERNATIONAL STANDARD ISO/IEC 29341-26-2 Reference number ISO/IEC 29341-26-2:2017(E) First edition 2017-09 ISO/IEC 2017 BS ISO/IEC 29341262:2017 ii ISO/IEC 2017 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2017, Published in Switzerland All rights reserved. Unless otherwise s

8、pecified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below o

9、r ISOs member body in the country of the requester. ISO copyright office Ch. de Blandonnet 8 CP 401 CH-1214 Vernier, Geneva, Switzerland Tel. +41 22 749 01 11 Fax +41 22 749 09 47 copyrightiso.org www.iso.org ISO/IEC 29341-26-2:2017(E) BS ISO/IEC 29341262:2017 ii ISO/IEC 2017 All rights reserved COP

10、YRIGHT PROTECTED DOCUMENT ISO/IEC 2017, Published in Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intran

11、et, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Ch. de Blandonnet 8 CP 401 CH-1214 Vernier, Geneva, Switzerland Tel. +41 22 749 01 11 Fax +41 22 749 09 47 copyrightiso.org

12、 www.iso.org ISO/IEC 29341-26-2:2017(E) ISO/IEC 29341-26-2:2017(E) ISO/IEC 2017 All rights reserved iii CONTENTS 1 Scope iv 2 Normative references 1 3 Terms, definitions and abbreviated terms . 1 4 Notations and conventions . 2 4.1 Text conventions . 2 4.2 Vendor-defined extensions . 2 5 Device Defi

13、nitions 2 5.1 Device Type . 2 5.2 TelephonyClient Device Architecture . 2 5.3 Device Model . 3 6 XML Device Description . 3 7 Test 5 Annex A (informative) Theory of Operation 6 Annex B (informative) Bibliography . 7 Figure 1 TelephonyClient Device Architecture 3 Figure A.1 Interaction Between a Tele

14、phony Client and Telephony Control Point 6 Table 1 Device Requirements 3 BS ISO/IEC 29341262:2017ISO/IEC 29341-26-2:2017(E) iv ISO/IEC 2017 All rights reserved Foreword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specializ

15、ed system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical commit

16、tees collaborate in fields of mutual interest. Other international organizations, governmental and nongovernmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. The procedures

17、 used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of document should be noted. This document was drafted in accordance with the editorial rules of

18、 the ISO/IEC Directives, Part 2 (see http:/www.iso.org/directives). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held res ponsible for identifying any or all such patent rights. Details of any patent ri

19、ghts identif ied during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents). Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement. For an

20、explanation on the voluntary nature of Standard, the meaning of the ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword Supplementary informatio

21、n ISO/IEC 29341262 was prepared by UPnP Forum and adopted, under the PAS procedure, by joint technical committee ISO/IEC JTC 1, Information technology, in parallel with its approval by national bodies of ISO and IEC. The list of all currently available parts of ISO/IEC 29341 series, under the genera

22、l title Information technology UPnP Device Architecture, can be found on the ISO web site. BS ISO/IEC 29341262:2017ISO/IEC 29341-26-2:2017(E) iv ISO/IEC 2017 All rights reserved Foreword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission)

23、form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IE

24、C technical committees collaborate in fields of mutual interest. Other international organizations, governmental and nongovernmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC

25、 1. The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of document should be noted. This document was drafted in accordance with the

26、editorial rules of the ISO/IEC Directives, Part 2 (see http:/www.iso.org/directives). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held res ponsible for identifying any or all such patent rights. Detail

27、s of any patent rights identif ied during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents). Any trade name used in this document is information given for the convenience of users and does not constitute an en

28、dorsement. For an explanation on the voluntary nature of Standard, the meaning of the ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword Supple

29、mentary information ISO/IEC 29341262 was prepared by UPnP Forum and adopted, under the PAS procedure, by joint technical committee ISO/IEC JTC 1, Information technology, in parallel with its approval by national bodies of ISO and IEC. The list of all currently available parts of ISO/IEC 29341 series

30、, under the general title Information technology UPnP Device Architecture, can be found on the ISO web site. ISO/IEC 29341-26-2:2017(E) ISO/IEC 2017 All rights reserved v Introduction ISO and IEC draw attention to the fact that it is claimed that compliance with this document may involve the use of

31、patents as indicated below. ISO and IEC take no position concerning the evidence, validity and scope of these patent rights. The holders of -these patent rights have assured ISO and IEC that they are willing to negotiate licenses under reasonable and non-discriminatory terms and conditions with appl

32、icants throughout the world. In this respect, the statements of the holders of these patent rights are registered with ISO and IEC. Intel Corporation has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Intel Corporation Standards Licensing D

33、epartment 5200 NE Elam Young Parkway MS: JFS-98 USA Hillsboro, Oregon 97124 Microsoft Corporation has informed IEC and ISO that it has patent applications or granted patents as listed below: 6101499 / US; 6687755 / US; 6910068 / US; 7130895 / US; 6725281 / US; 7089307 / US; 7069312 / US; 10/783 524

34、/US Information may be obtained from: Microsoft Corporation One Microsoft Way USA Redmond WA 98052 Philips International B.V. has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Philips International B.V. IP 6 170 007 / US; 6 139 177 / US; 6

35、 529 936 / US; 6 470 339 / US; 6 571 388 / US; 6 205 466 / US Information may be obtained from: Hewlett Packard Company 1501 Page Mill Road USA Palo Alto, CA 94304 Samsung Electronics Co. Ltd. has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained fr

36、om: Digital Media Business, Samsung Electronics Co. Ltd. 416 Maetan-3 Dong, Yeongtang-Gu, KR Suwon City 443-742 Huawei Technologies Co., Ltd. has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Huawei Technologies Co., Ltd. Administration Bu

37、ilding, Bantian Longgang District Shenzhen China 518129 Qualcomm Incorporated has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Qualcomm Incorporated 5775 Morehouse Drive San Diego, CA USA 92121 Telecom Italia S.p.A.has informed IEC and IS

38、O that it has patent applications or granted patents. Information may be obtained from: Telecom Italia S.p.A. Via Reiss Romoli, 274 Turin - Italy 10148 Cisco Systems informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Cisco Systems, Inc. 170 Wes

39、t Tasman Drive San Jose, CA USA 95134 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights other than those identified above. ISO and IEC shall not be held responsible for identifying any or all such patent rights. BS ISO/IEC 29341262:2

40、017ISO/IEC 29341-26-2:2017(E) vi ISO/IEC 2017 All rights reserved Hewlett Packard Company has informed IEC and ISO that it has patent applications or granted patents as listed below: 5 956 487 / US; 6 170 007 / US; 6 139 177 / US; 6 529 936 / US; 6 470 339 / US; 6 571 388 / US; 6 205 466 / US Inform

41、ation may be obtained from: Hewlett Packard Company 1501 Page Mill Road USA Palo Alto, CA 94304 Samsung Electronics Co. Ltd. has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Digital Media Business, Samsung Electronics Co. Ltd. 416 Maetan-

42、3 Dong, Yeongtang-Gu, KR Suwon City 443-742 Huawei Technologies Co., Ltd. has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Huawei Technologies Co., Ltd. Administration Building, Bantian Longgang District Shenzhen China 518129 Qualcomm Inc

43、orporated has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Qualcomm Incorporated 5775 Morehouse Drive San Diego, CA USA 92121 Telecom Italia S.p.A.has informed IEC and ISO that it has patent applications or granted patents. Information ma

44、y be obtained from: Telecom Italia S.p.A. Via Reiss Romoli, 274 Turin - Italy 10148 Cisco Systems informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA USA 95134 Attention is drawn to the poss

45、ibility that some of the elements of this document may be the subject of patent rights other than those identified above. ISO and IEC shall not be held responsible for identifying any or all such patent rights. ISO/IEC 29341-26-2:2017(E) ISO/IEC 2017 All rights reserved vii Original UPnP Document Re

46、ference may be made in this document to original UPnP documents. These references are retained in order to maintain consistency between the specifications as published by ISO/IEC and by UPnP Implementers Corporation and later by UPnP Forum. The following table indicates the original UPnP document ti

47、tles and the corresponding part of ISO/IEC 29341: UPnP Document Title ISO/IEC 29341 Part UPnP Device Architecture 1.0 ISO/IEC 29341-1:2008 UPnP Device Architecture Version 1.0 ISO/IEC 29341-1:2011 UPnP Device Architecture 1.1 ISO/IEC 29341-1-1:2011 UPnP Device Architecture 2.0 ISO/IEC 29341-1-2 UPnP

48、 Basic:1 Device ISO/IEC 29341-2 UPnP AV Architecture:1 ISO/IEC 29341-3-1:2008 UPnP AV Architecture:1 ISO/IEC 29341-3-1:2011 UPnP AVTransport:1 Service ISO/IEC 29341-3-10 UPnP ConnectionManager:1 Service ISO/IEC 29341-3-11 UPnP ContentDirectory:1 Service ISO/IEC 29341-3-12 UPnP RenderingControl:1 Ser

49、vice ISO/IEC 29341-3-13 UPnP MediaRenderer:1 Device ISO/IEC 29341-3-2 UPnP MediaRenderer:2 Device ISO/IEC 29341-3-2:2011 UPnP MediaServer:1 Device ISO/IEC 29341-3-3 UPnP AVTransport:2 Service ISO/IEC 29341-4-10:2008 UPnP AVTransport:2 Service ISO/IEC 29341-4-10:2011 UPnP ConnectionManager:2 Service ISO/IEC 29341-4-11:2008 UPnP ConnectionManager:2 Service ISO/IEC 29341-4-11:2011 UPnP ContentDirectory:2 Service ISO/IEC 29341-4-12 UPnP R