BS ISO IEC 30128-2014 Information technology Sensor networks Generic Sensor Network Application Interface《信息技术 传感器网络 通用的传感器网络应用接口》.pdf

1、BSI Standards Publication BS ISO/IEC 30128:2014 Information technology Sensor networks Generic Sensor Network Application InterfaceBS ISO/IEC 30128:2014 BRITISH STANDARD National foreword This British Standard is the UK implementation of ISO/IEC 30128:2014. The UK participation in its preparation wa

2、s entrusted to Technical Committee ICT/-/1, Information systems co-ordination. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its cor

3、rect application. The British Standards Institution 2014. Published by BSI Standards Limited 2014 ISBN 978 0 580 80467 0 ICS 35.110 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and St

4、rategy Committee on 30 November 2014. Amendments issued since publication Date Text affectedBS ISO/IEC 30128:2014 Information technology Sensor networks Generic Sensor Network Application Interface Technologies de linformation Rseaux de capteurs Interface gnrique pour des applications de rseaux de c

5、apteurs INTERNATIONAL STANDARD ISO/IEC 30128 Reference number ISO/IEC 30128:2014(E) First edition 2014-11-15 ISO/IEC 2014 BS ISO/IEC 30128:2014ii ISO/IEC 2014 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2014 All rights reserved. Unless otherwise specified, no part of this publication ma

6、y be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the

7、 requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ISO/IEC 30128:2014(E)BS ISO/IEC 30128:2014ISO/IEC 30128:2014(E)Contents Page Foreword iv Introduction v 1 Scope . 1 2 Norma

8、tive references 1 3 T erms and definitions . 1 4 Symbols and abbreviated terms . 4 5 Conventions . 4 6 Overview of sensor network applications . 4 6.1 Communication model . 4 6.2 Sensor network client operations 6 7 Overview of sensor network capabilities 11 8 Security considerations11 9 Data model

9、of sensor data and metadata 11 10 Generic sensor netw or k application int erfac e specification 12 10.1 Overview of generic sensor network application interface 12 10.2 Mandatory operations .15 10.3 Optional operations .21 Annex A (informative) Sensor Network Description (example) .32 Annex B (info

10、rmative) S ensing T ype and Measur ement Unit Specification (S ample) .35 Bibliography .37 ISO/IEC 2014 All rights reserved iiiBS ISO/IEC 30128:2014ISO/IEC 30128:2014(E) Foreword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the

11、 specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC techni

12、cal committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. The

13、 procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of document should be noted. This document was drafted in accordance with the editori

14、al rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details of any paten

15、t rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents). Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement. For

16、an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword Supplementary information. The committee responsible for th

17、is document is ISO/IEC JTC 1, Information technology.iv ISO/IEC 2014 All rights reservedBS ISO/IEC 30128:2014ISO/IEC 30128:2014(E) Introduction Sensor network is a key technology to enable building context aware smart environments for human beings, monitoring health status, cross-reality services, e

18、tc. But there are many different sensor network implementations and they are not interoperable. In general, sensor networks are developed according to the sensor network applications requirements (in which ways sensor network applications use sensor networks) within sensor network hardware constrain

19、ts. When it comes to sensor network applications requirements, they include transport-level requirements, sensor networks hardware point of requirements, applications operational requirements, etc. Of these requirements, applications operational requirements affect sensor network implementations, ev

20、en though each sensor network supports the same transport protocol and uses the same hardware specification. However, these applications operational requirements can be generalized and can be used to derive standard application layer interfaces between sensor networks and sensor network service prov

21、iders. This International Standard specifies generic sensor network application interfaces based on the generalized sensor network applications operational requirements with consideration on sensor network hardware constraints. ISO/IEC 2014 All rights reserved vBS ISO/IEC 30128:2014BS ISO/IEC 30128:

22、2014Information technology Sensor networks Generic Sensor Network Application Interface 1 Scope This International Standard specifies the interfaces between the application layers of service providers and sensor network gateways, which is Protocol A in interface 3, defined in ISO/IEC 29182-5. This I

23、nternational Standard covers description of generic sensor network applications operational requirements, description of sensor network capabilities, and mandatory and optional interfaces between the application layers of service providers and sensor network gateways 2 Normative references The follo

24、wing documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO/IEC 29182-2:

25、2013, Information technology Sensor networks: Sensor Network Reference Architecture (SNRA) Part 2: Vocabulary and terminology ISO/IEC 29182-5:2013, Information technology Sensor networks: Sensor Network Reference Architecture (SNRA) Part 5: Interface definitions 3 T erms a nd definiti ons For the pu

26、rposes of this document, the following terms and definitions apply. 3.1 actuator device that provides a physical output in response to an input signal in a predetermined way SOURCE: ISO/IEC 29182-2:2013, 2.1.1 3.2 application layer layer that provides means for the application processes to access th

27、e OSI environment SOURCE: ISO/IEC 29182-2:2013, 2.3.1.1 3.3 authentication act of verifying the claimed identity of an entity SOURCE: ISO/IEC 29182-2:2013, 2.6.1 Note 1 to entry: Entity may include sensor, actuator, or sensor network element. INTERNATIONAL ST ANDARD ISO/IEC 30128:2014(E) ISO/IEC 201

28、4 All rights reserved 1BS ISO/IEC 30128:2014ISO/IEC 30128:2014(E) 3.4 authorization granting of rights, which includes the granting of access based on access rights SOURCE: ISO/IEC 29182-2:2013, 2.6.2 3.5 continuous mode sensor data query mode with duration value (d) and interval value (t) 3.6 event

29、 mode sensor data query mode with event conditions. Sensor networks keep collecting sensor data and send them only, if the conditions are met 3.7 ide nt i f ic at ion process of recognizing an entity by using its attributes, identifier, etc. SOURCE: ISO/IEC 29182-2:2013, 2.7.2 3.8 instant mode senso

30、r data query mode for an immediate one- time response from a sensor network 3.9 onTime mode sensor data query mode with an action time 3.10 personal area network network consisting of sensor nodes, communication devices, or networked peripheral devices all in the vicinity of a person SOURCE: ISO/IEC

31、 29182-2:2013, 2.1.4 3.11 PAN coordinator device which is responsible for formation and maintenance of a PAN 3.12 pull mode sensor data delivery mode with an explicit sensor data query 3.13 push mode sensor data delivery mode without any explicit sensor data query Note 1 to entry: Push mode sensor d

32、ata delivery may be triggered by an explicit start request and may be terminated by an explicit stop request. It is an implementation issue. 3.14 sensor device that observes and measures a physical property of a natural phenomenon or man-made process and converts that measurement into a signal SOURC

33、E: ISO/IEC 29182-2:2013, 2.1.5 Note 1 to entry: Signal can be electrical, chemical, etc.2 ISO/IEC 2014 All rights reservedBS ISO/IEC 30128:2014ISO/IEC 30128:2014(E) 3.15 sensor network system of spatially distributed sensor nodes interacting with each other and, depending on applications, possibly w

34、ith other infrastructure in order to acquire, process, transfer, and provide information extracted from its environment with a primary function of information gathering and possible control capability SOURCE: ISO/IEC 29182-2:2013, 2.1.6 Note 1 to entry: Distinguishing features of a sensor network ca

35、n include wide area coverage, use of radio networks, flexibility of purpose, self-organization, openness, and providing data for multiple applications. 3.16 sensor network application use case of sensor networks, which provides a set of functions to users to meet defined requirements SOURCE: ISO/IEC

36、 29182-2:2013, 2.2.2 EXAMPLE Monitoring forests to detect natural fires; monitoring seismic activity; monitoring pollution levels in environment. 3.17 sensor network client application software that uses information provided by a sensor network 3.18 sensor network gateway sensor network element that

37、 connects a sensor network to another network with different architectures or protocols, permitting information exchange between them SOURCE: ISO/IEC 29182-2:2013, 2.1.7 Note 1 to entry: Sensor network gateway functionalities may include address or protocol translation. 3.19 sensor network resource

38、entity related to a sensor network which may be a sensor network gateway, a PAN coordinator (if any), a sensor node or a transducer 3.20 sensor network service set of functionalities offered by individual sensor network elements or the sensor network SOURCE: ISO/IEC 29182-2:2013, 2.2.3 EXAMPLE Gener

39、ating an alarm signal if the measurement made at a sensor exceeds or drops out of certain prescribed range; providing average sensor measurements over a given geographic area. 3.21 transducer device converting energy from one domain into another, calibrated to minimize the errors in the conversion p

40、rocess. It could be a sensor or an actuator SOURCE: IEEE Std 1451.1-1999 3.22 user any person, organization, process, device, program or system which uses services provided by others, and may benefit from the operation of a sensor network SOURCE: ISO/IEC 29182-2:2013, 2.8.5 ISO/IEC 2014 All rights r

41、eserved 3BS ISO/IEC 30128:2014ISO/IEC 30128:2014(E) 4 Symbols and abbreviated terms This document uses the following abbreviations and acronyms: CoAP Constrained Application Protocol DNS Domain Name System O&M Observations and Measurements in SWE PAN Personal Area Network SensorML Sensor Model Langu

42、age in SWE SNC Sensor Network Client SWE Sensor Web Enablement TEDS Transducer Electronic Data Sheet 5 Conventions In this part of ISO/IEC 30128: The keyword “shall” is used to indicate requirements strictly to be followed in order to conform to the document and from which no deviation is permitted.

43、 The keyword “should” is used to indicate that among several possibilities one is recommended as particularly suitable, without mentioning or excluding others, or that a certain course of action is preferred but not necessarily required, or that (in the negative form) a certain possibility or course

44、 of action is deprecated but not prohibited. The keyword “may” is used to indicate a course of action permissible within the limits of the document. The key word “can” is used for statements of possibilit y and capabilit y, whether material, physical or causal. 6 Overview of sensor network applicati

45、ons 6.1 Communication model Sensor network applications provide sensor-associated or actuator-associated services for users by interacting with at least one sensor network. When it comes to sensor network service providers, they need to communicate with lots of different types of sensor networks to

46、provide integrated services for users. On the other hand, sensor networks provide sensor network services to multiple sensor network service providers to maximize their benefits. In this context, the communication model between sensor network service providers and sensor networks can be summarized i

47、n two cases. In one case, an interface is defined by a sensor network that provides sensor network services based on the interface. Then, sensor network service providers implement the interface defined by each sensor network to communicate with the sensor network. This case is illustrated in Figure

48、 1. If there is no standard interface between sensor networks and sensor network service providers, sensor network service providers need to implement different interfaces to communicate with different sensor networks. In Figure 1, the sensor network service provider needs to implement interface A,

49、interface B, and interface C altogether to provide integrated services for users. In view of that there are many different sensor network providers in the world, implementing all of these sensor network providers interfaces is a tedious and time consuming process, and it is definitely not a good solution.4 ISO/IEC 2014 All rights reservedBS ISO/IEC 30128:2014ISO/IEC 30128:2014(E) Figure 1 Communication model: Multiple sensor networks and one