BS ISO IEC 7501-3-2006 Identification cards - Machine readable travel documents - Machine readable official travel documents《识别卡 机器可读旅行文件 机器可读正式旅行文件》.pdf

1、BRITISH STANDARD BS ISO/IEC 7501-3:2005 Identification cards Machine readable travel documents Part 3: Machine readable official travel documents ICS 35.240.15 BS ISO/IEC 7501-3:2005 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 16 January

2、2006 BSI 16 January 2006 ISBN 0 580 47550 6 National foreword This British Standard reproduces verbatim ISO/IEC 7501-3:2005 and implements it as the UK national standard. It supersedes BS ISO/IEC 7501-3:1997 which is withdrawn. The UK participation in its preparation was entrusted to Technical Commi

3、ttee IST/17, Cards and personal identification, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred to in this document may be fo

4、und in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are res

5、ponsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep

6、 the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the ISO/IEC title page, pages ii and iii, a blank page, page 1 and a back cover. The BSI copyright notice

7、displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments Reference number ISO/IEC 7501-3:2005(E)INTERNATIONAL STANDARD ISO/IEC 7501-3 Second edition 2005-10-15Identification cards Machine readable travel documents Part 3: Mach

8、ine readable official travel documents Cartes didentification Documents de voyage lisibles par machine Partie 3: Documents de voyage officiels lisibles par machine BS ISO/IEC 7501-3:2005 ii iii Foreword ISO (the International Organization for Standardization) and IEC (the International Electrotechni

9、cal Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical acti

10、vity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical commi

11、ttee, ISO/IEC JTC 1. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of the joint technical committee is to prepare International Standards. Draft International Standards adopted by the joint technical committee are circulated t

12、o national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held respons

13、ible for identifying any or all such patent rights. ISO/IEC 7501-3 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 17, Cards and personal identification. This second edition cancels and replaces the first edition (ISO/IEC 7501-3:1997), of which it con

14、stitutes a minor revision. ISO/IEC 7501 consists of the following parts, under the general title Identification cards Machine readable travel documents: Part 1: Machine readable passport Part 2: Machine readable visa Part 3: Machine readable official travel documents BS ISO/IEC 7501-3:2005blank 1 Id

15、entification cards Machine readable travel documents Part 3: Machine readable official travel documents This part of ISO/IEC 7501 specifies generic formats and minimum data elements for visual inspection and machine reading of official travel documents in the ID-1 and ID-2 card formats containing st

16、andardized, globally interoperable machine readable optical character recognition (OCR) data, which may at the option of Governments, be accepted in lieu of a passport as defined in Annex 9 (Chapter 3, paragraph 3.4) to the Convention on International Civil Aviation year 1946 (as revised). The editi

17、on of the International Civil Aviation Organization (ICAO) Document, i.e. Doc 9303 Part 3 Size-1 and Size-2 Machine Readable Official Travel Documents, Sections III and IV, Technical Specifications, which was adopted as ISO/IEC 7501-3:1997 is now out of date and in the process of being revised. ICAO

18、 Doc 9303 Part 3 is maintained by a Technical Advisory Group on Machine Readable Travel Documents (TAG/MRTD). ISO/IEC JTC 1 has provided and continues to provide liaison during the TAG/MRTD meetings on Doc 9303 Part 3. Once the new edition of Doc 9303 Part 3 Size-1 and Size-2 Machine Readable Offici

19、al Travel Documents is finalized by the TAG/MRTD, ISO/IEC JTC 1 will undertake its consideration for endorsement as a new third edition of ISO/IEC 7501-3. Information on the TAG/MRTD for ICAO Doc 9303 Part 3 can be obtained on application to the Secretary General, International Civil Aviation Organi

20、zation, 999 University Street, Montreal, Quebec, Canada H3C 5H7. BS ISO/IEC 7501-3:2005BS ISO/IEC 7501-1:2005 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standa

21、rds in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality o

22、f our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8

23、996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)2

24、0 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise

25、 requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and s

26、ervices. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits conta

27、ct Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi

28、-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or trans

29、mitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.