BS ISO IEC IEEE 8802-1AX-2016 Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements.pdf

1、BSI Standards Publication BS ISO/IEC/IEEE 8802-1AX:2016 Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 1AX: Link AggregationBS ISO/IEC/IEEE 8802-1AX:2016 BRITISH STANDARD National foreword This Britis

2、h Standard is the UK implementation of ISO/IEC/IEEE 8802-1AX:2016. The UK participation in its preparation was entrusted to Technical Committee IST/6, Data communications. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not pur

3、port to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2016. Published by BSI Standards Limited 2016 ISBN 978 0 580 90843 9 ICS 35.240.80 Compliance with a British Standard cannot confer immunity from legal obl

4、igations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2016. Amendments/corrigenda issued since publication Date Text affectedBS ISO/IEC/IEEE 8802-1AX:2016 Reference number ISO/IEC/IEEE 8802-1AX:2016(E) IEEE 2014 INTERNATIONAL S

5、TANDARD ISO/IEC/ IEEE 8802-1AX First edition 2016-01-15 Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 1AX: Link Aggregation Technologies de linformation Tlcommunications et change dinformation entre

6、systmes Rseaux locaux et mtropolitains Exigences spcifiques Partie 1AX: Agrgation de lien BS ISO/IEC/IEEE 8802-1AX:2016 ISO/IEC/IEEE 8802-1AX:2016(E) COPYRIGHT PROTECTED DOCUMENT IE E E 2 0 1 4 A ll r ig h ts r e s e r v e d . U n le s s o th e r w is e s p e c ifie d , n o p a r t o f th is p u b l

7、ic a tio n m a y b e r e p r o d u c e d o r u tiliz e d in a n y fo r m o r b y a n y m e a n s , e le c tro n ic o r m e c h a n ic a l, in c lu d in g p h o to c o p y in g a n d m ic ro film , w ith o u t p e rm is s io n in w ritin g fro m IS O , IE C o r IE E E a t th e re s p e c tiv e a d d

8、r e s s b e lo w . In s tit u te o f E le c tr ic a l a n d E le c tr o n ic s E n g in e e r s , In c . 3 P a r k A v e n u e , N e w Y o r k N Y 1 0 0 1 6 - 5 9 9 7 , U S A E - m a il s td s .ip r ie e e .o r g W e b w w w . ie e e . o r g P u b lis h e d in S w itz e r la n d ii IE E E 2 0 1 4 A

9、ll r ig h ts r e s e r v e d S oright oie Ch. de Blandonnet 8 CP 401 CH-1214 Vernier, Geneva, Switzerland Tel. +41 22 749 01 11 Fax +41 22 749 09 47 orightiso.org www.iso.orgBS ISO/IEC/IEEE 8802-1AX:2016 ISO/IEC/IEEE 8802-1AX:2016(E) IEEE 2014 All rights reserved iii Foreword ISO (the International

10、Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by th

11、e respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non- governmental, in liaison with ISO and IEC, also take part in the work. In the field of i

12、nformation technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards thro

13、ugh a consensus development process, approved by the American National Standards Institute, which brings together volunteers representing varied viewpoints and interests to achieve the final product. Volunteers are not necessarily members of the Institute and serve without compensation. While the IE

14、EE administers the process and establishes rules to promote fairness in the consensus development process, the IEEE does not independently evaluate, test, or verify the accuracy of any of the information contained in its standards. The main task of ISO/IEC JTC 1 is to prepare International Standards

15、. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is called to the possibility that implementation of this

16、 standard may require the use of subject matter covered by patent rights. By publication of this standard, no position is taken with respect to the existence or validity of any patent rights in connection therewith. ISO/IEEE is not responsible for identifying essential patents or patent claims for w

17、hich a license may be required, for conducting inquiries into the legal validity or scope of patents or patent claims or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance or a Patent Statement and Licensing Declaration Form, if any,

18、 or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from ISO

19、or the IEEE Standards Association. ISO/IEC/IEEE 8802-1AX was prepared by the LAN/MAN of the IEEE Computer Society (as IEEE 8802-1AX-2014). It was adopted by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 6, Telecommunications and information exchange between systems

20、, in parallel with its approval by the ISO/IEC national bodies, under the “fast-track procedure” defined in the Partner Standards Development Organization cooperation agreement between ISO and IEEE. IEEE is responsible for the maintenance of this document with participation and input from ISO/IEC na

21、tional bodies. BS ISO/IEC/IEEE 8802-1AX:2016BS ISO/IEC/IEEE 8802-1AX:2016 IEEE Standard for Local and metropolitan area networks Link Aggregation Sponsored by the LAN/MAN Standards Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE Computer Society IEEE Std 802.1AX-2014 (Revision of IEEE

22、Std 802.1AX-2008) BS ISO/IEC/IEEE 8802-1AX:2016BS ISO/IEC/IEEE 8802-1AX:2016 BS ISO/IEC/IEEE 8802-1AX:2016BS ISO/IEC/IEEE 8802-1AX:2016 IEEE Std 802.1AX-2014 (Revision of IEEE Std 802.1AX-2008) IEEE Standard for Local and metropolitan area networks Link Aggregation Sponsor LAN/MAN Standards Committe

23、e of the IEEE Computer Society Approved 10 December 2014 IEEE SA-Standards Board BS ISO/IEC/IEEE 8802-1AX:2016BS ISO/IEC/IEEE 8802-1AX:2016 The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2014 by The Institute of Electrical and Electr

24、onics Engineers, Inc. All rights reserved. Published 30 December 2014. Printed in the United States of America. IEEE and 802 are registered trademarks in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. I

25、n addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce,

26、test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received fro

27、m users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any

28、 IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE F

29、OR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY

30、, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. BS ISO/IEC/IEEE 8802-1AX:2016 ISO/IEC/IEEE 8802-1AX:2016(E)BS ISO/I

31、EC/IEEE 8802-1AX:2016 iv Copyright 2014 IEEE. All rights reserved. Translations The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE

32、 standard. Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as

33、, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on stand

34、ards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the

35、form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the memb

36、ers of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to pa

37、rticipate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should c

38、onsult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does

39、not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made availa

40、ble by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents. BS ISO/IEC/IEEE 8802-1AX:2016 ISO/IEC/IEEE 8802-1AX:2016(E)