BS ISO IEC IEEE 8802-3-1-2015 Standard for Management Information Base (MIB) Definitions for Ethernet《管理信息库 (MIB) 标准 以太网定义》.pdf

1、BSI Standards Publication BS ISO/IEC/IEEE 8802-3-1:2015 Standard for Management Information Base (MIB) Definitions for EthernetBS ISO/IEC/IEEE 8802-3-1:2015 BRITISH STANDARD National foreword This British Standard is the UK implementation of ISO/IEC/IEEE 8802-3-1:2015. The UK participation in its pr

2、eparation was entrusted to Technical Committee IST/6, Data communications. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct

3、 application. The British Standards Institution 2015. Published by BSI Standards Limited 2015 ISBN 978 0 580 89368 1 ICS 35.110 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strate

4、gy Committee on 30 September 2015. Amendments issued since publication Date Text affectedBS ISO/IEC/IEEE 8802-3-1:2015Reference number ISO/IEC/IEEE 8802-3-1:2015(E) IEEE 2013INTERNATIONAL STANDARD ISO/IEC/ IEEE 8802-3-1 First edition 2015-08-01 Standard for Management Information Base (MIB) Definiti

5、ons for Ethernet Part 3-1 Norme pour la base dinformations de gestion (MIB) Dfinitions pour lthernet Partie 3-1 BS ISO/IEC/IEEE 8802-3-1:2015 ISO/IEC/IEEE 8802-3-1:2015(E) COPYRIGHT PROTECTED DOCUMENT IEEE 2015 All rights reserved. Unless otherwise specified, no part of this publication may be repro

6、duced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from ISO, IEC or IEEE at the respective address below. ISO copyright office IEC Central Office Institute of Electrical and Electronics Engineers, Inc. Case pos

7、tale 56 3, rue de Varemb 3 Park Avenue, New York CH-1211 Geneva 20 CH-1211 Geneva 20 NY 10016-5997, USA Tel. + 41 22 749 01 11 Switzerland E-mail stds.iprieee.org Fax + 41 22 749 09 47 E-mail inmailiec.ch Web www.ieee.org E-mail copyrightiso.org Web www.iec.ch Web www.iso.org Published in Switzerlan

8、d ii IEEE 2015 All rights reservedBS ISO/IEC/IEEE 8802-3-1:2015 ISO/IEC/IEEE 8802-3-1:2015(E) IEEE 2015 All rights reserved iiiForeword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardi

9、zation. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mut

10、ual interest. Other international organizations, governmental and non- governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. IEEE Standards documents are developed within

11、 the IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards through a consensus development process, approved by the American National Standards Institute, which brings together volunteers representing var

12、ied viewpoints and interests to achieve the final product. Volunteers are not necessarily members of the Institute and serve without compensation. While the IEEE administers the process and establishes rules to promote fairness in the consensus development process, the IEEE does not independently ev

13、aluate, test, or verify the accuracy of any of the information contained in its standards. The main task of ISO/IEC JTC 1 is to prepare International Standards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an Inte

14、rnational Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is called to the possibility that implementation of this standard may require the use of subject matter covered by patent rights. By publication of this standard, no position is taken with respect

15、to the existence or validity of any patent rights in connection therewith. ISO/IEEE is not responsible for identifying essential patents or patent claims for which a license may be required, for conducting inquiries into the legal validity or scope of patents or patent claims or determining whether

16、any licensing terms or conditions provided in connection with submission of a Letter of Assurance or a Patent Statement and Licensing Declaration Form, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the

17、validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from ISO or the IEEE Standards Association. ISO/IEC/IEEE 8802-3-1 was prepared by the LAN/MAN Standards Committee of the IEEE Computer Society (as IEE

18、E 802.3.1:2013). It was adopted by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 6, Telecommunication and information exchange between systems, in parallel with its approval by the ISO/IEC national bodies, under the “fast-track procedure” defined in the Partner Sta

19、ndards Development Organization cooperation agreement between ISO and IEEE. IEEE is responsible for the maintenance of this document with participation and input from ISO/IEC national bodies. BS ISO/IEC/IEEE 8802-3-1:2015BS ISO/IEC/IEEE 8802-3-1:2015 IEEE Standard for Management Information Base (MI

20、B) Definitions for Ethernet Sponsored by the LAN/MAN Standards Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE Computer Society IEEE Std 802.3.1-2013 (Revision of IEEE Std 802.3.1-2011) BS ISO/IEC/IEEE 8802-3-1:2015BS ISO/IEC/IEEE 8802-3-1:2015 IEEE Std 802.3.1 -2013 (Revision of IEEE

21、Std 802.3.1-2011) IEEE Standard for Management Information Base (MIB) Definitions for Ethernet Sponsor LAN/MAN Standards Committee of the IEEE Computer Society Approved 14 June 2013 IEEE-SA Standards Board ISO/IEC/IEEE 8802-3-1:2015(E) IEEE 2015 All rights reservedBS ISO/IEC/IEEE 8802-3-1:2015 Permi

22、ssions have been granted as follows a : Portions of this standard reprinted with permission from Avaya, IETF RFC 2108 Definitions of Managed Objects for IEEE 802.3 Repeater Devices using SMIv2, 1997. Portions of this standard reprinted with permission from Microsemi Corporation, IETF RFC 3621 Defini

23、tions Power Ethernet MIB, 2003. Portions of this standard reprinted with permission from Avaya, IETF RFC 3621 Definitions Power Ethernet MIB, 2003. Portions of this standard reprinted with permission from the Hewlett-Packard Company, IETF RFC 3635 Definitions of Managed Objects for the Ethernet-like

24、 Interface Types, 2003. Material from IETF RFC 4836 Definitions of Managed Objects for IEEE 802.3 Medium Attachment Units (MAUs) reprinted with permission from the IETF Trust and the persons identified as the document authors, 2007. Portions of this standard reprinted with permission from Edward Bei

25、li, IETF RFC 4836 Definitions of Managed Objects for IEEE 802.3 Medium Attachment Units (MAUs), 2007. Material from IETF RFC 4837 Managed Objects of Ethernet Passive Optical Networks (EPON) reprinted with permission from the IETF Trust and the persons identified as the document authors, 2007. Portio

26、ns of this standard reprinted with permission from PMC-Sierra, IETF RFC 4837 Managed Objects of Ethernet Passive Optical Networks (EPON), 2007. Material from IETF RFC 4878 Definitions and Managed Objects for Operations, Administration, and Maintenance (OAM) Functions on Ethernet-Like Interfaces repr

27、inted with permission from the IETF Trust and the persons identified as the document authors, 2007. Material from IETF RFC 5066 Ethernet in the First Mile Copper (EFMCu) Interfaces MIB reprinted with permission from the IETF Trust and the persons identified as the document authors. Portions of this

28、standard reprinted with permission from Edward Beili, IETF RFC 5066 Ethernet in the First Mile Copper (EFMCu) Interfaces MIB, 2007. a Every effort has been made to secure permission to reprint borrowed material contained in this document. If omissions have been made, please bring them to the attenti

29、on of the IEEE P802.3.1 working group. ISO/IEC/IEEE 8802-3-1:2015(E) IEEE 2015 All rights reservedBS ISO/IEC/IEEE 8802-3-1:2015 The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2013 by the Institute of Electrical and Electronics Engine

30、ers, Inc. All rights reserved. Published 2 August 2013. Printed in the United States of America. IEEE and 802 are registered trademarks in the U.S. Patent +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. ISO/IEC/IEEE 8802-3-1:2015(E) IEEE 2015 All rights reserved