BS MA 98-1-1985 Multi-bucket dredgers Specification for scale of bucket capacities《多斗疏浚船 斗容量规模规范》.pdf

1、BRITISH STANDARD MARINE SERIES CONFIRMED JULY 1999 BS MA 98-1:1985 ISO7607:1984 Multi-bucket dredgers Part1: Specification for scale of bucket capacities ISO title: Shipbuilding Inland navigation Multi-bucket dredgers Scale of bucket capacities UDC621.879.443:627.748BSMA98-1:1985 This BritishStandar

2、d, having been prepared under the directionof the Shipbuilding andMarine Standards Committee, was published underthe authority of the Board ofBSI and comes into effect on 28February1985 BSI02-2000 The following BSI references relate to the work on this standard: Committee reference SME/14 Draft for

3、comment82/80206 DC ISBN 0 580 14371 6 Committees responsible for this BritishStandard The preparation of this BritishStandard was entrusted by the Shipbuilding and Marine Standards Committee (SME/-) to Technical Committee SME/14, upon which the following bodies were represented: Association of Maste

4、r Lightermen and Barge Owners (Port of London) British Tugowners Association British Waterways Board HM Customs and Excise Shiprepairers and Shipbuilders Independent Association Amendments issued since publication Amd. No. Date of issue CommentsBSMA98-1:1985 BSI 02-2000 i Contents Page Committees re

5、sponsible Inside front cover National foreword ii 1 Scope and field of application 1 2 Definition 1 3 Bucket capacities 1BSMA98-1:1985 ii BSI 02-2000 National foreword This Part of BS MA98 has been prepared under the direction of the Shipbuilding and Marine Standards Committee and is identical with

6、ISO7607:1984 “Shipbuilding Inland navigation Multi-bucket dredgers Scale of bucket capacities” published by the International Organization for Standardization (ISO). ISO7607 was produced as a result of international discussion in which the UK took an active part. Terminology and conventions. The tex

7、t of the International Standard has been approved as suitable for publication as a BritishStandard without deviation. Some terminology and certain conventions are not identical with those used in BritishStandards; attention is drawn especially to the following. Where the words “International Standar

8、d” appear, referring to this standard, they should be read as “BritishStandard”. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself

9、confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pagesi andii, page1 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on

10、the inside front cover.BSMA98-1:1985 BSI 02-2000 1 1 Scope and field of application This International Standard gives a series of bucket capacities as a basis for standardization of inland dredger details. This series applies to multi-bucket dredgers used for dredging rivers, canals, lakes, water st

11、orage basins, water areas of ports and terminals. 2 Definition For the purpose of this International Standard, the following definition applies. bucket capacity total volume of liquid contained in the bucket when filled to the upper cutting edges, in cubic decimetres 3 Bucket capacities The scale of

12、 bucket capacities consisting of two series of capacities, expressed in cubic decimetres, is shown in the table. Bucket capacity, V dm 3 100 160 250 400 500 630 630 750 900 1100BS MA 98-1:1985 ISO7607:1984 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent

13、 national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess

14、 the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of

15、 which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standar

16、ds publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Information on standards

17、 BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Cen

18、tre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyrig

19、ht Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in

20、any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.