1、PUBLISHED DOCUMENT PD CEN/TR 15349:2006 Hardware for furniture Terms for extension elements and their components ICS 01.040.97; 97.140 PD CEN/TR 15349:2006 This Published Document was published under the authority of the Standards Policy and Strategy Committee on 31 March 2006 BSI ISBN 0 580 48027 5
2、 National foreword This Published Document is the official English language version of CEN/TR 15349:2006. The UK participation in its preparation was entrusted to Technical Committee FW/1, Common test methods for furniture, which has the responsibility to: A list of organizations represented on this
3、 committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using
4、the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a Published Document does not of itself confer immunity fr
5、om legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK.
6、 Summary of pages This document comprises a front cover, an inside front cover, the CEN/TR title page, pages 2 to 30, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. D
7、ate CommentsTECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 15349 February 2006 ICS 01.040.97; 97.140 English Version Hardware for furniture - Terms for extension elements and their components Quincaillerie dameublement - Terminologie des lments extractibles et de leurs composants Mbel
8、beschlge - Begriffe fr Auszge und deren Komponenten This Technical Report was approved by CEN on 9 January 2006. It has been drawn up by the Technical Committee CEN/TC 207. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, G
9、ermany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORM
10、UNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. CEN/TR 15349:2006: E2 Contents Page Foreword 3 1 Scope .4 2 Terms/Termes/Begriffe .5 Alphabetical indexes (E) .28 Index al
11、phabtiques (F).29 Alphabetisches Stichwortverzeichnis (D)30 CEN/TR 15349:20063 Foreword This Technical Report (CEN/TR 15349:2006) has been prepared by Technical Committee CEN/TC 207 “Furniture”, the secretariat of which is held by UNI. Attention is drawn to the possibility that some of the elements
12、of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. CEN/TR 15349:20064 1 Scope This European Technical Report specifies terms for all types of extension elements and their components for all fields of a
13、pplication, except table extensions. With the aid of figures it establishes different types, with the aim of facilitating understanding the technical language. CEN/TR 15349:20065 2 Terms/Termes/Begriffe Table 1/Tableau 1/Tabelle 1 No. Terms/Termes/Begriffe Figure/Figure/Bild 2.1 Drawer slides/Coulis
14、ses/Auszugfhrungen 2.1.1 plain bar slide coulisseau Gleitfhrung Figure 1 2.1.2 plain bar slide with guiding roller coulisseau galet Rollgleitfhrung Figure 2 CEN/TR 15349:20066 Table 1 (continued) No. Terms/Termes/Begriffe Figure/Figure/Bild 2.1.3 roller runner coulisse galets Rollenfhrung Figure 3 2
15、.1.4 slide with carrier coulisse chariot Laufwagenfhrung Figure 4 CEN/TR 15349:20067 Table 1 (continued) No. Terms/Termes/Begriffe Figure/Figure/Bild 2.1.5 caged ball race runner coulisse simple billes Kugelfhrung Figure 5 2.1.6 slide with integrated synchronisation coulisse avec galets diffrentiel
16、Differentialauszug Figure 6 2.1.7 partial extension sortie partielle Teilauszug 2.1.8 full extension sortie totale Vollauszug 2.1.9 extra extension surextension berauszug Figure 7 CEN/TR 15349:20068 Table 1 (continued) No. Terms/Termes/Begriffe Figure/Figure/Bild 2.1.10 double sided drawer ouvrant d
17、es deux cts nach zwei Seiten ausziehbar Key/Lgende/Legende 1 front 1/faade 1/Blende 1 2 cabinet/caisson/Korpus 3 front 2/ faade 2/Blende 2 4 drawer/tiroir/Schubkasten Figure 8 2.1.11 pull-out TV swivel stand plateau extractible et pivotant (plateau TV) nach einer Seite auszieh- und drehbar (Fernseha
18、uszug) Figure 9 CEN/TR 15349:20069 Table 1 (continued) No. Terms/Termes/Begriffe Figure/Figure/Bild 2.2 Slide elements/Composants des coulisses/Bauteile der Fhrungen 2.2.1 Details Key/Lgende/Legende 1 pull out stop/scurit anti-dcrochage/Aushngesicherung 2 open stop/bute en ouverture/Anschlag, (ffnen
19、) 3 locating catch/bute darrt/Auszugarretierung 4 close stop/bute en fermeture/Anschlag, (schlieen) 5 roller/galet/Rolle 6 cabinet rail/coulisse de coffre/Korpusschiene 7 drawer rail/coulisse de tiroir/Schubkastenschiene 8 running surface/bande de roulement/Laufflche 9 self-closing feature/fermeture
20、 automatique/Selbsteinzug Figure 10 2.2.2 front support bracket equerre de faade Frontwinkel Key/Lgende/Legende 1 front bracket/equerre de faade/Frontwinkel Figure 11 CEN/TR 15349:200610 Table 1 (continued) No. Terms/Termes/Begriffe Figure/Figure/Bild 2.2.3 carriage chariot Laufwagen Key/Lgende/Lege
21、nde 1 carriage/chariot/Laufwagen Figure 12 2.2.4 locking pin ergot de verrouillage Verriegelungselement Key/Lgende/Legende 1 locking pin/ergot de verroulliage/Verriegelungselement Figure 13 2.3 Assembly of drawers and slides/Montage des coulisses et du tiroir/Montage der Schubksten und Fhrungen 2.3.
22、1 overlay fixing montage en applique aufliegende Montage Key/Lgende/Legende x installation width/largeur de montage/Einbaubreite Figure 14 CEN/TR 15349:200611 Table 1 (continued) No. Terms/Termes/Begriffe Figure/Figure/Bild 2.3.2 hanging fixing fixation suspendue hngende Montage Figure 15 2.3.3 groo
23、ve fixing montage en rainure Nutzmontage Key/Lgende/Legende x installation width/largeur de montage/Einbaubreite Figure 16 2.3.4 side fixing fixation latrale seitliche Montage Key/Lgende/Legende x installation width/largeur de montage/Einbaubreite Figure 17 CEN/TR 15349:200612 Table 1 (continued) No
24、. Terms/Termes/Begriffe Figure/Figure/Bild 2.3.5 under fixing fixation par le dessous Unterflurmontage Key/Lgende/Legende x 1installation width/largeur de montage/ Einbaubreite x 2installation hight/hauteur de montage/Einbauhhe Figure 18 2.3.6 concealed fixing montage invisible verdeckte Montage Fig
25、ure 19 2.4 Drawers/Tiroirs/Schubksten 2.4.1 drawer tiroir Schubkasten Figure 20 CEN/TR 15349:200613 Table 1 (continued) No. Terms/Termes/Begriffe Figure/Figure/Bild 2.4.2 pan drawer tiroir rhauss Frontauszug Figure 21 2.4.3 internal pan drawer tiroirs rhauss langlaise Innenauszug Key/Lgende/Legende
26、1 internal pan drawer/tiroirs langlaise/Innenauszug Figure 22 2.4.4 internal drawer tiroir langlaise Innenschubkasten Key/Lgende/Legende 1 internal drawer/tiroir langlaise/Innenschubkasten Figure 23 CEN/TR 15349:200614 Table 1 (continued) No. Terms/Termes/Begriffe Figure/Figure/Bild 2.4.5 pull-out s
27、helf tablette extractible Tablarauszug Figure 24 2.4.6 pull out pen drawer tirette-plumier Schreibmaterialauszug Figure 25 2.5 Types of drawer constructions/Types de constructions de tiroir/Schubksten-Bauarten 2.5.1 components composants Einzelteile Key/Lgende/Legende 1 drawer front/faade/Blende (Fr
28、ont) 2 bottom panel/fond/Boden 3 side panel/cts de tiroir/Zarge 4 rear panel/derrire/Rckwand Figure 26 CEN/TR 15349:200615 Table 1 (continued) No. Terms/Termes/Begriffe Figure/Figure/Bild 2.5.2 three-sided wooden drawer tiroir bois trois cts Holzzargenkasten, dreiseitig Figure 27 2.5.3 four-sided wo
29、oden drawer tiroir bois quatre cts Holzzargenkasten, vierseitig Key/Lgende/Legende 1 front/ faade/Blende Figure 28 2.5.4 plastic drawer tiroir plastique Kunststoffschubkasten Figure 29 CEN/TR 15349:200616 Table 1 (continued) No. Terms/Termes/Begriffe Figure/Figure/Bild 2.5.5 steel drawer tiroir mtal
30、lique Stahlschubkasten Figure 30 2.5.6 single-wall metal profile with integral slide cts mtalliques simple paroi Metallzarge, einwandig Figure 31 2.5.7 double-wall metal profile with integral slide cts mtalliques double parois Metallzarge, zweiwandig Figure 32 CEN/TR 15349:200617 Table 1 (continued)
31、 No. Terms/Termes/Begriffe Figure/Figure/Bild 2.6 Drawer components/Pices dtaches pour tiroir/Schubkasten Bauteile 2.6.1 plug-in file cradle cadre dossiers suspendus amovible Hngeregistratur als Einsatz Key/Lgende/Legende 1 cross divider/traverse/Zwischensteg Figure 33 2.6.2 pull-out suspension file
32、 frame berceau tlescopique pour dossiers suspendus Hngeregistratur als SchubkastenFigure 34 CEN/TR 15349:200618 Table 1 (continued) No. Terms/Termes/Begriffe Figure/Figure/Bild 2.6.3 card index box insert joue de fichier Karteibahn Figure 35 2.6.4 card index box bote fiches Karteikasten Figure 36 2.
33、6.5 card index divider support pivotant Schwenksttze Figure 37 CEN/TR 15349:200619 Table 1 (continued) No. Terms/Termes/Begriffe Figure/Figure/Bild 2.6.6 cross divider cloison intermdiaire/sparation Trennsteg Figure 38 2.6.7 pencil tray tirette plumier Materialschale Figure 39 2.6.8 tilted paper sep
34、erator trieur oblique Schrgablage Figure 40 CEN/TR 15349:200620 Table 1 (continued) No. Terms/Termes/Begriffe Figure/Figure/Bild 2.6.9 cutlery tray insert range-couverts Besteckeinsatz Figure 41 2.6.10 cover cap cache Abdeckkappe Key/Lgende/Legende 1 cover cap/cache/Abdeckkappe Figure 42 2.6.11 fron
35、t mounting bracket fixation faade Frontbefestigung Figure 43 CEN/TR 15349:200621 Table 1 (continued) No. Terms/Termes/Begriffe Figure/Figure/Bild 2.6.12 catch for slide-in assembly loqueteau pour montage par glissement Rastkupplung fr Aufschiebemontage Key/Lgende/Legende 1 catch/loqueteau/Rastkupplu
36、ng 2 front/faade/Blende 3 drawer rail/coulisse de trioir/Schubkastenschiene Figure 44 2.6.13 pin for plug-in assembly pion de centrage Zapfen fr Aufsteckmontage Key/Lgende/Legende 1 pin/pion/Zapfen Figure 45 2.6.14 rear hook for drawer fixing empennage Haken fr hintere Schubkastenaufnahme Key/Lgende
37、/Legende 1 hook/empennage/Haken Figure 46 CEN/TR 15349:200622 Table 1 (continued) No. Terms/Termes/Begriffe Figure/Figure/Bild 2.6.15 lengthwise rail rails supports rails longitudinaux Lngsreling Key/Lgende/Legende 1 lengthwise rail/rails longitudinaux/Lngsreling Figure 47 2.6.16 cross rail traverse
38、 rail Querreling Key/Lgende/Legende 1 cross rail/traverse rail/Querreling Figure 48 CEN/TR 15349:200623 Table 1 (continued) No. Terms/Termes/Begriffe Figure/Figure/Bild 2.6.17 rail connector clips de fixation Relingsbefestigung Key/Lgende/Legende 1 front connector/fixation faade/ Relingsbefestigung
39、(Front) 2 rear connector/fixation derrire/ Relingsbefestigung (Rckwand) Figure 49 2.6.18 suspension file frame dossiers suspension Hngeregistratur Figure 50 CEN/TR 15349:200624 Table 1 (continued) No. Terms/Termes/Begriffe Figure/Figure/Bild 2.6.19 drawer divider agencement intrieur Inneneinteilung
40、Figure 51 2.7 Dimensions and assembly/Terms dimensions et indications de montage/Ma- und Montagebegriffe 2.7.1 position positionnement Einbauposition Key/Lgende/Legende x 1extension open travel loss/longeur non extraite/ Auszugsverlust x 2extension open travel/course/Auszuglnge x 3clear height of dr
41、awer/jeur pour le montage/Einhngehub Figure 52 CEN/TR 15349:200625 Table 1 (continued) No. Terms/Termes/Begriffe Figure/Figure/Bild 2.7.2 widths largeurs Breiten Key/Lgende/Legende x 1bottom panel width/largeur du fond/Bodenbreite x 2internal cabinet width/largeur intrieure utile du caisson/ Lichte
42、Weite des Korpus x 3bottom panel thickness/epaisseur du fond/Bodendicke Figure 53 2.7.3 depths profondeurs Tiefen Key/Lgende/Legende x 1internal cabinet depth/profondeur intrieure du caisson/ Lichte Tiefe des Korpus x 2overall drawer depth/profondeur du tiroir/Tiefe des Schubkastens x 3internal draw
43、er depth/profondeur utile du tiroir/Lichte Tiefe des Schubkastens x 4runner length/longueur de lacoulisse/Fhrungslnge Figure 54 CEN/TR 15349:200626 Table 1 (continued) No. Terms/Termes/Begriffe Figure/Figure/Bild 2.7.4 drawer dimensions dimensions du tiroir Schubkastenmae Key/Lgende/Legende x 1overa
44、ll drawer width/largeur du tiroir/Schubkastenbreite x 2internal drawer height/profondeur intrieure/Innenhhe x 3internal drawer width/largeur utile du tiroir/Lichte Weite des Schubkastens Figure 55 2.8 cabinet drilling pattern schma de perage Bohrbild Figure 56 CEN/TR 15349:200627 Table 1 (continued)
45、 No. Terms/Termes/Begriffe Figure/Figure/Bild 2.9 front adjustment rglage de faade Frontverstellung Key/Lgende/Legende alateral adjustment/rglage latral/Seitenverstellung bheight adjustment/rglage en hauteur/Hhenverstellung ctilt adjustment/rglage de laplomb/Neigungsverstellung Figure 57 CEN/TR 1534
46、9:200628 Alphabetical indexes (E) No assembly of drawers and slides 2.3 cabinet drilling pattern . 2.8 caged ball race runner 2.1.5 card index box . 2.6.4 card index box insert 2.6.3 card index divider . 2.6.5 carriage 2.2.3 catch for slide-in assembly . 2.6.12 components .2.5.1 concealed fixing . 2
47、.3.6 cover cap . 2.6.10 cross divider . 2.6.6 cross rail 2.6.16 cutlery tray insert . 2.6.9 depths 2.7.3 details 2.2.1 dimensions and assembly . 2.7 double sided drawer . 2.1.10 double-wall metal profile with integral slide 2.5.7 drawer 2.4.1 drawer components 2.6 drawer dimensions . 2.7.4 drawer di
48、vider 2.6.19 drawers .2.4 extra extension 2.1.9 four-sided wooden drawer . 2.5.3 front adjustment . 2.9 front mounting bracket . 2.6.11 front support bracket 2.2.2 full extension 2.1.8 groove fixing 2.3.3 hanging fixing . 2.3.2 internal drawer . 2.4.4 No internal pan drawer 2.4.3 lengthwise rail rai
49、ls supports 2.6.15 locking pin 2.2.4 overlay fixing 2.3.1 pan drawer .2.4.2 partial extension .2.1.7 pencil tray .2.6.7 pin for plug-in assembly .2.6.13 plain bar slide .2.1.1 plain bar slide with guiding roller 2.1.2 plastic drawer .2.5.4 plug-in file cradle 2.6.1 position 2.7.1 pull out pen drawer .2.4.6 pull-out shelf .2.4
copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1