1、Safety of toys Interpretations Part 2: Replies to requests for interpretation of the chemical standards in the EN 71-series PD CEN/TR 15371-2:2017 BSI Standards Publication WB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06 TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 15371-2
2、May 2017 ICS 97.200.50 Supersedes CEN/TR 15371-2:2015 English Version Safety of toys - Interpretations - Part 2: Replies to requests for interpretation of the chemical standards in the EN 71- series Scurit des jouets - Interprtations - Partie 2: Rponses aux demandes dinterprtation des normes chimie
3、de la srie EN 71 Sicherheit von Spielzeug - Interpretationen - Teil 2: Antworten auf Anfragen zur Interpretation der chemischen Normen in der Normenreihe EN 71 This Technical Report was approved by CEN on 17 April 2017. It has been drawn up by the Technical Committee CEN/TC 52. CEN members are the n
4、ational standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
5、Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and
6、 by any means reserved worldwide for CEN national Members. Ref. No. CEN/TR 15371-2:2017 E National foreword This Published Document is the UK implementation of CEN/TR 15371- 2:2017. It supersedes PD CEN/TR 15371-2:2015, which is withdrawn. The UK participation in its preparation was entrusted to Tec
7、hnical Committee CW/15, Safety of toys. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards
8、 Institution 2017 Published by BSI Standards Limited 2017 ISBN 978 0 580 96335 3 ICS 97.200.50 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2017. Ame
9、ndments/corrigenda issued since publication Date Text affected PUBLISHED DOCUMENT PD CEN/TR 15371-2:2017 TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 15371-2 May 2017 ICS 97.200.50 Supersedes CEN/TR 15371-2:2015 English Version Safety of toys - Interpretations - Part 2: Replies to r
10、equests for interpretation of the chemical standards in the EN 71- series Scurit des jouets - Interprtations - Partie 2: Rponses aux demandes dinterprtation des normes chimie de la srie EN 71 Sicherheit von Spielzeug - Interpretationen - Teil 2: Antworten auf Anfragen zur Interpretation der chemisch
11、en Normen in der Normenreihe EN 71 This Technical Report was approved by CEN on 17 April 2017. It has been drawn up by the Technical Committee CEN/TC 52. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yu
12、goslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COM
13、IT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. CEN/TR 15371-2:2017 E PD CEN/TR 15371-2:2017CEN/TR 15371-
14、2:2017 (E) 2 Contents Page European foreword . 3 0 Introduction 4 0.1 Interpretations and no-action decisions 4 0.2 Requests for interpretation . 4 0.3 Answers to requests for interpretations 5 1 Scope 6 2 EN 71-3:2013, Safety of toys Part 3: Migration of certain elements 6 2.1 4.1 Toy material cate
15、gories - “stickers” (interpretation) . 6 2.2 4.1 Toy material categories - “erasers” (interpretation) 7 2.3 4.1 Toy material categories (interpretation) 7 PD CEN/TR 15371-2:2017CEN/TR 15371-2:2017 (E) 3 European foreword This document (CEN/TR 15371-2:2017) has been prepared by Technical Committee CE
16、N/TC 52 “Safety of toys”, the secretariat of which is held by DS. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supers
17、edes CEN/TR 15371-2:2015. CEN/TR 15371, Safety of toys Interpretations, is currently composed with the following parts: Part 1: Replies to requests for interpretation of EN 71-1, EN 71-2, EN 71-8 and EN 71-14; Part 2: Replies to requests for interpretation of the chemical standards in the EN 71-seri
18、es. PD CEN/TR 15371-2:2017CEN/TR 15371-2:2017 (E) 4 0 Introduction 0.1 Interpretations and no-action decisions This Technical Report contains replies to requests for interpretations concerning the understanding of clauses in the chemical standards in the EN 71 series: EN 71-3: Migration of certain e
19、lements; EN 71-4: Experimental sets for chemistry and related activities; EN 71-5: Chemical toys (sets) other than experimental sets; EN 71-7: Finger paints Requirements and test methods; EN 71-9: Organic chemical compounds Requirements; EN 71-10: Organic chemical compounds Sample preparation and ex
20、traction; EN 71-11: Organic chemical compounds Methods of analysis; EN 71-12: N-Nitrosamines and N-Nitrosatable substances; EN 71-13: Olfactory board games, cosmetic kits and gustative games. The replies concern those requests that have resulted in an interpretation or a decision that no action is r
21、equired as the standard is sufficiently clear. An interpretation does not have the same status as the text of the standard, nor can it overrule the text of the standard. However, following an interpretation should give assurance that the relevant clause of the standard has been correctly applied. An
22、 interpretation should only be regarded as a clarification of the meaning of the standard such that stakeholders can apply it correctly in a conformity assessment. An interpretation is not an assessment of the requirement in the standard - it is only a strict interpretation of the meaning of the tex
23、t. Disclaimer The interpretations have been derived by expert groups of CEN/TC 52. The information contained herein is for guidance only and does not reflect the formal approval by CEN or CEN member bodies. It should be noted that the interpretations are neither part of any standard nor have been re
24、ferenced in the Official Journal of the European Union. 0.2 Requests for interpretation Requests for interpretations may be submitted by a CEN member body through its national committee or by a CEN/TC 52 liaison (but not directly by an individual or a company) - in accordance with the interpretation
25、 protocols agreed by CEN/TC 52. The requests are then channelled to the relevant CEN/TC 52 working party, which will then deal with the request. A request for an interpretation may lead to: a) An interpretation of the standard: This should reflect a reasonable interpretation of how the standard shou
26、ld be used, taking into account: PD CEN/TR 15371-2:2017CEN/TR 15371-2:2017 (E) 5 1) the wording of the standard; 2) the rationale of the standard; 3) the history of the standard. b) A no-action decision: This is applicable when it is agreed that the standard appropriately specifies how a toy shall b
27、e assessed. c) A proposal for an amendment of the standard: This is applicable when it is agreed that the standard is deficient in some way. NOTE Interpretation and no-action decisions are published in CEN/TR 153712, which will be updated on a regular basis. Proposals for amendments will be progress
28、ed as new work item proposals in accordance with CEN rules. 0.3 Answers to requests for interpretations Since requests for interpretations are submitted through a CEN member body or a CEN/TC 52 liaison, it is assumed that they will keep themselves informed about decisions concerning the request and
29、its progress and will themselves inform the originator of the request as appropriate. PD CEN/TR 15371-2:2017CEN/TR 15371-2:2017 (E) 6 1 Scope The purpose of this Technical Report is to provide replies to requests for interpretations of actual chemical standards in the EN 71 series: EN 71-3: Migratio
30、n of certain elements; EN 71-4: Experimental sets for chemistry and related activities; EN 71-5: Chemical toys (sets) other than experimental sets; EN 71-7: Finger paints Requirements and test methods; EN 71-9: Organic chemical compounds Requirements; EN 71-10: Organic chemical compounds Sample prep
31、aration and extraction; EN 71-11: Organic chemical compounds Methods of analysis; EN 71-12: N-Nitrosamines and N-Nitrosatable substances; EN 71-13: Olfactory board games, cosmetic kits and gustative games. 2 EN 71-3:2013, Safety of toys Part 3: Migration of certain elements 2.1 4.1 Toy material cate
32、gories - “stickers” (interpretation) Question The question relates to the categorization of “stickers” under 4.1 Toy material categories of EN 71-3. Stickers are often composed of paper/plastic and glue. Sticky/liquid glue as such falls within category II of the EN 71-3 (liquid or sticky material),
33、while paper/plastic falls within category III (scraped-off material). We have considered two situations: stickers already on the toy (glue is not accessible to children since the sticker is already on the toy); stickers provided as such to children (glue is accessible once the sticker is removed fro
34、m its backing). We would like to know whether the sticker materials in the two above cases shall be considered independently for their categorization (i.e. category II for the glue and category III for the paper) or whether the whole sticker should be considered for the categorization. Reply Sticker
35、s which are already placed on the toy (glue is not accessible) should be tested as scraped-off material (polymer/paper: category III). Stickers provided as such to the child with possible exposure to the thin sticky part (including temporary tattoos), should also be evaluated according to category I
36、II as a whole. REQ 001-13 (UNI, Italy) PD CEN/TR 15371-2:2017CEN/TR 15371-2:2017 (E) 7 2.2 4.1 Toy material categories - “erasers” (interpretation) Question The question relates to the categorization of “erasers” under 4.1 Toy material categories of EN 71-3. Erasers classified as toys which are made
37、 of polymeric material releases some particles when used. In which toy material category should we classify erasers? Reply Erasers made of polymeric material and classified as toys (see commission guidance document 15) and their released particles are categorized as category III toy material. REQ 00
38、2-13 (UNI, Italy) 2.3 4.1 Toy material categories (interpretation) Question How should highly viscous liquids (e.g. approaching solidity) which would fall into category II for the purposes of EN 71-3, be distinguished from pliable modelling materials which would fall into category I? The following e
39、xample has been given: If a portion of a highly viscous liquid category II was removed there would be little evidence of this within a short period of time. The substance would flow into the space previously occupied and create a new level. A category I modelling material would hold its shape if a p
40、ortion was removed. See example below: Figure 1 PD CEN/TR 15371-2:2017CEN/TR 15371-2:2017 (E) 8 It might appear that viscous liquid paints (category II) have a similar consistency to pliable modelling materials category I (see table below). Moreover in this case also very viscous liquids might leave
41、 dry residues on the hands of the user (see chart CEN/TC 52/WG 5 N 578). Table 1 Cross-reference table for determining category Reply It is recommended to use Table 1 under Clause 4.1 from the EN 71-3:2013+A1 which categorizes the toy materials according to their application. If the toy material is
42、a modelling material then it should be evaluated as a category I material; If the toy material is paint (other than compressed paint tablets) then it should be evaluated as a category II material, even for high viscous paint. REQ 03-15 (BSI, UK) PD CEN/TR 15371-2:2017This page deliberately left blan
43、kBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services. BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited. British Standards Institution (
44、BSI) About us We bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions. The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open
45、consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals. Information on standards We can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or cont
46、acting our Customer Services team or Knowledge Centre. Buying standards You can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreig
47、n standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team. Copyright in BSI publications All the content in BSI publications, including British Standards, is the property of and copyrighted by BSI or some person or entity that owns copyrig
48、ht in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use. Save for the provisions below, you may not transfer, share or disseminate any portion of the standard to any other person. You may not a
49、dapt, distribute, commercially exploit, or publicly display the standard or any portion thereof in any manner whatsoever without BSIs prior written consent. Storing and using standards Standards purchased in soft copy format: A British Standard purchased in soft copy format is licensed to a sole named user for personal or internal company use only. The standard may be stored on more than 1 device provided that it is accessible by the sole named
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1