BS PD CEN TR 15868-2009 9375 Survey of national nrequirements used in nconjunction with EN n206-1 2000《需要与EN 206-1 2000标准一起使用的各国要求调查》.pdf

1、PD CEN/TR15868:2009ICS 91.100.30NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWPUBLISHED DOCUMENTSurvey of nationalrequirements used inconjunction with EN206-1:2000Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 18/06/2010 02:03, Uncontrolled Copy, (c) BSIThis Published

2、 Documentwas published under theauthority of the StandardsPolicy and StrategyCommittee on 28 February2010 BSI 2010ISBN 978 0 580 63980 7Amendments/corrigenda issued since publicationDate CommentsPD CEN/TR 15868:2009National forewordThis Published Document is the UK implementation of CEN/TR15868:2009

3、.The UK participation in its preparation was entrusted to TechnicalCommittee B/517/1, Concrete production and testing.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contrac

4、t. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 18/06/2010 02:03, Uncontrolled Copy, (c) BSIPD CEN/TR 15868:2009TECHNICAL REPORTRAPPORT TECHNIQUETECHNISCHER BER

5、ICHTCEN/TR 15868June 2009ICS 91.100.30English VersionSurvey of national requirements used in conjunction with EN206-1:2000tat des prescriptions nationales utilises avec lEN 206-1:2000berblick nationaler Anforderungen, die imZusammenhang mit EN 206-1:2000 verwendet werdenThis Technical Report was app

6、roved by CEN on 3 February 2009. It has been drawn up by the Technical Committee CEN/TC 104.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Lux

7、embourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights

8、of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. CEN/TR 15868:2009: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 18/06/2010 02:03, Uncontrolled Copy, (c) BSIPD CEN/TR 15868:2009CEN/TR 15868:2009 (E) 2 Contents Page Foreword 3 1 Scope 4 2 Loc

9、ation of national requirements .6 3 Exposure classes.8 4 Constituent materials . 27 5 Limiting values 35 6 Methods for minimising the risk of damaging ASR 57 7 Use of additions 62 8 Intermediate compressive strength classes 75 9 Conformity and certification 76 10 National provisions related to addit

10、ional or different requirements . 84 11 Production control 96 Annex A National minimum aggregate categories for normal weight aggregate concrete used in general construction 99 Annex B Limiting values . 117 Annex C Use of Ground Granulated Blastfurnace Slag . 135 Licensed Copy: Wang Bin, ISO/EXCHANG

11、E CHINA STANDARDS, 18/06/2010 02:03, Uncontrolled Copy, (c) BSIPD CEN/TR 15868:2009CEN/TR 15868:2009 (E) 3 Foreword This document (CEN/TR 15868:2009) has been prepared by Technical Committee CEN/TC 104 “Concrete and related products”, the secretariat of which is held by DIN. Attention is drawn to th

12、e possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 18/06/2010 02:03, Uncontrolled Copy, (c) BSIPD CEN/TR 1

13、5868:2009CEN/TR 15868:2009 (E) 4 1 Scope This CEN Report provides a summary of national requirements used with EN 206-1:2000. The aims of this CEN Report are to: a) provide a picture of how EN 206-1 is being applied in practice; b) identify areas where EN 206-1 is being interpreted in different ways

14、; c) identify areas where CEN Member Countries have found simplification to be necessary; d) identify additional national requirements; e) show areas where CEN Member Countries have found it necessary to override the requirements of EN 206-1. EN 206-1 uses the phrase national provisions. However, re

15、cent CEN Guidance wishes to retain this term for regulatory requirements only. This survey uses the term national requirements to include regulations, standards and other documents that form the basis of local practice. As a summary of national requirements, the information in this CEN Report is inc

16、omplete and may have been subject to later revisons. It is insufficient and not intended to provide the basis for design and specification: for this the national requirements (see Table 1.1) should be studied. Table 1.1 identifies CEN Member Countries who did not respond to the questionnaire. The ot

17、her tables in this CEN Report only include information from CEN Member Countries who responded and CEN Member Countries who did not respond are not identified. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 18/06/2010 02:03, Uncontrolled Copy, (c) BSIPD CEN/TR 15868:2009CEN/TR 15868:2009 (E)

18、 5 Members of Ad Hoc Group Professor Tom Harrison, Convenor Dipl.-Ing. Anette Berrig Dr. Ir. Claude Bleiman Dr. Manuel Burn Dr. Ir. Hans Cornelissen Dr. Michel Delort Dr. John Moore Dipl.-Ing. Udo Wiens CEN Member Countries CEN Member Countries Austria AT Latvia LV Belgium BE Lithuania LTCyprus CY L

19、uxembourg LU Czech Republic CZ Malta MT Denmark DK Netherlands NLEstonia EE Norway NO Finland FI Poland PLFrance FR Portugal PT Germany DE Slovakia (Slovak Republic) SK Greece GR Slovenia SIHungary HU Spain ES Iceland IS Sweden SEIreland IE Switzerland CH Italy IT United Kingdom UKAffiliates Albania

20、 AL Bulgaria BG Croatia (Hrvatska) HR Romania RO Turkey TR Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 18/06/2010 02:03, Uncontrolled Copy, (c) BSIPD CEN/TR 15868:2009CEN/TR 15868:2009 (E) 6 2 Location of national requirements Table 1.1 gives the title of the documents that contain the na

21、tional requirements, together with an English translation of the title. Any person wishing to design and specify concrete in another CEN Member Country should consult the documents cited in Table 1.1. Please note that the documents will be written in the national language(s) of the CEN Member Countr

22、y. It should also be noted that the survey was conducted during 2005 to 2006 and the answers reflect practice at that time, which may not be the same as current practice. Table 1.1 Location of national requirements CEN Member CountriesaLocation of national requirements Austria NORM B 4710-1: Beton T

23、eil 1: Festlegung, Herstellung, Verwendung und Konformittsnachweis (Regeln zur Umsetzung der NORM EN 206-1) (Concrete Part 1: Specification, production, use and verification of conformity (Rules for the implementation of NORM EN 206-1) Belgium NBN B 15-001: Supplment la NBN EN 206-1 Bton Spcificatio

24、n, performances, production et conformit NBN B 15-001: Aanvulling op NBN EN 206-1 Beton Eisen, gedraging, vervaardiging en conformiteit (Supplement to NBN EN 206-1: Concrete Specification, performance, production and conformity) Cyprus No response received Czech Republic CSN EN 206-1 Zmena Z2 Denmar

25、k DS 2426: Beton Materialer Regler for anvendelse af EN 206-1 i Danmark (Concrete Materials Rules for the use of EN 206-1 in Denmark) Estonia No response received Finland Suomen rakentamismryskokoelma, B4 Betonirakenteet, Liite 3: Kansallinen liite standardiin SFS-EN 206-1 (National Building Code of

26、 Finland, B4 Concrete structures, Annex 3: national Annex to standard SFS-EN 206-1) Informative Guidance document: Betoninormit 2004, Suomen Betoniyhdistys (Concrete Code, Finnish Concrete Association) France National annex included in the NF EN 206-1 standard Germany DIN 1045-2: Tragwerke aus Beton

27、, Stahlbeton und Spannbeton Teil 2: Beton Festlegung, Eigenschaften, Herstellung und Konformitt Anwendungsregeln zu DIN EN 206-1 (DIN 1045-2: Concrete, reinforced and prestressed concrete structures Part 2: Concrete Specification, properties, production and conformity Application rules for DIN EN 20

28、6-1) Greece No response received Hungary No response received Iceland No response received Ireland National Annex; published with I.S. EN 206-1 as a single document. Italy UNI 11104: Calcestruzzo Specificazione, prestazione produzione e conformit Istruzioni complementari per lapplicazione della EN 2

29、06-1 (Concrete Specification, performance, production and conformity, Additional provisions for the application of EN 206-1) Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 18/06/2010 02:03, Uncontrolled Copy, (c) BSIPD CEN/TR 15868:2009CEN/TR 15868:2009 (E) 7 Table 1.1 (continued) CEN Member

30、 CountriesaLocation of national requirements Latvia No response received Lithuania No response received Luxembourg DNA EN 206: Document National dApplication luxembourgeois de lEN 206-1: Bton Partie 1: Spcification, performances, production et conformit (DNA EN 206: Luxemburgish national application

31、 document of the EN 206-1: Concrete Part 1: specification, performance, production and conformity) Malta There are no national provisions, but in the past, local industry has used recommendations in European, British or German standards Netherlands NEN 8005:2004: Nederlandse invulling van NEN-EN 206

32、-1: Beton Deel 1: Specificatie, eigenschappen, vervaardiging en conformiteit (Dutch supplement to NEN-EN 206-1: Concrete Part 1: Specification, performance, production and conformity) Norway NS-EN 206-1 National Annex Poland No response received Portugal The Portuguese requirements are in the Nation

33、al Annex to NP EN 206-1 and to NP ENV 13670-1 and in the following National Civil Engineering Laboratory (LNEC) specifications, referenced in the NA of NP EN 206-1 LNEC E 461:2004: Metodologia para prevenir reaces expansivas internas (Methodology for avoiding internal expansive reactions) LNEC E 464

34、:2005: Metodologia prescritiva para uma vida til de 50 e 100 anos face s aces ambientais (Prescritive methodology for a 50 and 100 years design working life under the environmental exposures) LNEC E 465:2005: Metodologia para estimar as propriedades de desempenho do beto que permitam satisfazer a vi

35、da til de projecto de estruturas de beto armado ou pr-esforado sob as exposies ambientais XC e XS (Methodology for estimating the concrete performance properties allowing to comply with the design working life of the reinforced or prestressed concrete structures under the environmental exposures XC

36、and XS) Slovakia STN EN 206-1: Zmena 1 Concrete Part 1: Specification, performance, production and conformity supplements EN 206-1 with the national provisions STN 731210: Water-proof concrete and concrete types of the specific characteristics (Resistance to abrasion, Concrete for the massive constr

37、uctions Low hydrating warmth) Slovenia SIST 1026: Beton 1.del: Specifikacija, lastnosti, proizvodnja in skladnost Pravila za uporabo SIST EN 206-1 (SIST 1026: Concrete Part 1: Specification, performance, production and conformity Rules for the implementation of SIST EN 206-1) Spain Spain has not ado

38、pted EN 206-1 Sweden SS 13 70 03: Betong Anvndning av EN 206-1 I Sverige (Concrete Application of EN 206-1 in Sweden) Vgledning fr val av exponeringsklass enligt SS-EN 206-1, Betongrapport nr 11, Svenska Betongfreningen (Guidance for selection of exposure class according to SS-EN 206-1, Concrete rep

39、ort No 11, Swedish Concrete Association) Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 18/06/2010 02:03, Uncontrolled Copy, (c) BSIPD CEN/TR 15868:2009CEN/TR 15868:2009 (E) 8 Table 1.1 (continued) CEN Member CountriesaLocation of national requirements Switzerland SN EN 206-1:2000: Beton Tei

40、l 1: Festlegung, Eigenschaften, Herstellung und Konformitt (mit Nationalem Vorwort und Nationalem Anhang) (SN-EN 206-1:2000: Concrete Part 1: Specification, performance, production and conformity (with National Preface and National Annex) SN EN 206-1:2000/A1:2004: Beton Teil 1: Festlegung, Eigenscha

41、ften, Herstellung und Konformitt (SN EN 206-1:2000/A2:2005: Concrete Part 1: Specification, performance, production and conformity) Ergnzung zum Nationalen Anhang NB der Norm SN EN 206-1:2000: Teil 1: Verwendung von Zementen und Zusatzstoffen gemss dem Prinzip der gleichwertigen Betonleistungsfhigke

42、it (in Arbeit) (Amendments to the National Annex of the SN EN 206-1: Part 1: Use of cements and mineral additions according to the equivalent performance concept of concrete properties (in preparation) Ergnzung zum Nationalen Anhang der Norm SN EN 206-1:2000: Teil 1: Anwendung des k-Wert Konzeptes g

43、emss dem Prinzip der gleichwertigen Betonleistungsfhigkeit (in Arbeit); der Anhang wird Nationaler Anhang NC genannt (Application of the k-value concept according to the principle of the equivalent concrete performance) United Kingdom BS 8500: Concrete Complementary British Standard to BS EN 206-1 P

44、art 1: Method of specifying and guidance for the specifier Part 2: Specification for constituent materials and concrete a None of the CEN affiliates chose to respond to this survey. 3 Exposure classes In Table 2.1 exposure classes that have been grouped together are given. A significant number of CE

45、N Member Countries have found the need to simplify the system. In its simplest form this reduces to interior, outside, severe and (chemically) aggressive. A significant number of CEN Member Countries have grouped classes (not always in the same way). For example, XC3 and XC4 are grouped together and

46、 often the XF1 is combined with XC4 and XF2 with XD3 or the concrete quality is the same. However, not all CEN Member Countries have to consider freeze-thaw action and so it may not be possible to group the carbonation-induced corrosion exposure classes (XC) and freeze-thaw exposure classes (XF) at

47、a CEN level. The reasons for grouping them together vary and include: a) simplifying the system to meet local needs; b) one exposure class cannot exist without the other exposure class in the local environment; c) not easy for engineers to select one exposure from another; d) the resulting concrete

48、specification is the same. Some CEN Member Countries have not grouped the exposure classes, but have the same quality of concrete for several exposure classes. If they are following EC2, this may lead to different minimum covers to reinforcement, but the same concrete quality. Licensed Copy: Wang Bi

49、n, ISO/EXCHANGE CHINA STANDARDS, 18/06/2010 02:03, Uncontrolled Copy, (c) BSIPD CEN/TR 15868:2009CEN/TR 15868:2009 (E) 9 As the examples in EN 206-1:2000, Table 1 are informative, Table 2.2 shows the extent to which the informative examples have been adopted in CEN Member Countries and gives the additional national examples of these exposure classes. There is a clear message in the responses showing that the informative examples for the XC1 and XC2 e