1、BSI Standards Publication Railway applications Drivers cab Background information on anthropometric data PD CEN/TR 16823:2015National foreword This Published Document is the UK implementation of CEN/TR 16823:2015. The UK participation in its preparation was entrusted by Technical Committee RAE/4, Ra
2、ilway Applications - Rolling stock systems, to Panel RAE/4/-/4, Railway Applications - Drivers Cab. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are re
3、sponsible for its correct application. The British Standards Institution 2016. Published by BSI Standards Limited 2016 ISBN 978 0 580 87248 8 ICS 13.180; 45.060.10 Compliance with a British Standard cannot confer immunity from legal obligations. This Published Document was published under the author
4、ity of the Standards Policy and Strategy Committee on 31 December 2015. Amendments/corrigenda issued since publication Date Text affected PUBLISHED DOCUMENT PD CEN/TR 16823:2015 TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16823 December 2015 ICS 13.180; 45.060.10 English Version Ra
5、ilway applications - Drivers cab - Background information on anthropometric data Applications ferroviaires - Cabines doprateur - Justification des donnes anthropometriques Bahnanwendungen - Fhrerraum - Hintergrundinformationen zu anthropometrischen Daten This Technical Report was approved by CEN on
6、21 March 2015. It has been drawn up by the Technical Committee CEN/TC 256. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Irelan
7、d, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centr
8、e: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. CEN/TR 16823:2015 E PD CEN/TR 16823:2015CEN/TR 16823:2015 (E) 2 Contents Page European foreword . 3 Introduction 4 1 Scope 4 2 Terms and definit
9、ions . 4 3 Background on anthropometric data 4 3.1 Sources for current anthropometric data 4 3.2 Preconditions and principles applied . 5 3.3 Trend detected and consequences . 5 3.4 Impacts which are considered 6 3.5 Approaching a representative driver height 7 Bibliography 8 PD CEN/TR 16823:2015CEN
10、/TR 16823:2015 (E) 3 European foreword This document (CEN/TR 16823:2015) has been prepared by Technical Committee CEN/TC 256 “Railway applications”, the secretariat of which is held by DIN. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
11、rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. PD CEN/TR 16823:2015CEN/TR 16823:2015 (E) 4 Introduction This docum
12、ent has been used as a basis for deriving the requirements related to anthropometric data used in the EN 16186 series 5. The following principles have been applied for the purposes of this document: Principle 1: Every identified trend has the same direction in all member states. The direction of a t
13、rend could be upwards or downwards. An example for an upward trend would be changes in body height. Principle 2: All trends take place at the same time in all member states. Principle 3: The impact of every trend is different. Impacts can be treated like a vector. Principle 4: Using the average of b
14、ody height of the European population does not create the height of the average European driver. 1 Scope This Technical Report describes the background on the anthropometric data provided by EN 16186-1 1. 2 Terms and definitions For the purposes of this document, the following terms and definitions
15、apply. 2.1 driver person tasked with operating a vehicle or a train by operating controls in a drivers cab or on a remote control unit 2.2 drivers cab compartment of a vehicle which is equipped with controls and instruments with which the driver controls traction units in the train 3 Background on a
16、nthropometric data 3.1 Sources for current anthropometric data European database: PeopleSize Database 2; EN ISO 15537 3; recent representative European customer specifications; UIC 651 4. NOTE It has been proven that anthropometric data provided by UIC 651 are more representative for northern than f
17、or southern European populations. PD CEN/TR 16823:2015CEN/TR 16823:2015 (E) 5 3.2 Preconditions and principles applied The analysis of the sources mentioned in 3.1 has shown that a number of common parameters exist. The following preconditions apply: a) if a trend is discovered, it is deemed to appl
18、y for all European member states in tendency and timing; b) trends pointing in different directions are combined and substituted by a resulting common trend; c) the average body height of the weighted European population is not sufficient for determining a future range of driver sizes for Europe; d)
19、 missing data about eastern European drivers are substituted by the average between northern and southern populations; e) a very common approach for body height (automobile, aviation, clothing industry) takes into consideration: 1) the 5 % percentile European female, and 2) the 95 % percentile Europ
20、ean male, see Figure 1 and Figure 3. Key X population percentile Y body height, in mm indicative, age range 18 to 25 (male) Figure 1 Impact of the percentile on the body height 3.3 Trend detected and consequences Body height is shown to be generally higher in northern Europe compared to southern Eur
21、ope (Figure 2). NOTE 1 Due to human nutrition and medical research there is an assumed trend of increasing body height by approximately 1 mm p.a. This trend is now assumed to have slowed down or even stopped. NOTE 2 To account for future changes of body sizes, the average size of people aged 18 year
22、s to 39 years is considered to be more representative than that of people aged 18 years to 64 years (Figure 3). PD CEN/TR 16823:2015CEN/TR 16823:2015 (E) 6 Key X member state 1 Sweden 4 Italy (corrective) Y body height, in mm 2 Germany 5 Italy (age range 18 to 83) age range 18 to 64 (5 % female) 3 U
23、nited Kingdom Figure 2 Northsouth divide Key X age groups (ranges) typical min. (5 % female) Y body height, in mm typical max. (95 % male) Figure 3 Indicative age groups and their body heights 3.4 Impacts which are considered Impact on height: the impact of every trend is different; the male and fem
24、ale population are getting taller year by year; the higher the percentile value used, the taller the people that will need to be considered. PD CEN/TR 16823:2015CEN/TR 16823:2015 (E) 7 3.5 Approaching a representative driver height Step 1: Validation: Deciding on a Representative European average (s
25、ee Figure 4). Step 2: Fix the future option means: Implementation of proposed options (see Figure 4). Result: Consensus 1 550 mm to 1 910 mm: Key X representative European average database Representative European average Y body height, in mm 1 consensus 5 % European female increase due to future evo
26、lution (for women no increase is considered) 2 typical min. (5 % European female) data cohort 18 to 60 and 18 to 35 3 consensus 95 % European male additional for actuality of 10 years old database 4 typical max. (95 % European male) NOTE Column 1 is explained by Column 2, and Column 3 is explained b
27、y Column 4. Figure 4 Derivation of the 1 550 mm to 1 910 mm height range PD CEN/TR 16823:2015CEN/TR 16823:2015 (E) 8 Bibliography 1 EN 16186-1, Railway applications - Drivers cab - Part 1: Anthropometric data and visibility 2 European official data base: PeopleSize 2008 Professional, Version 1.10, O
28、pen Ergonomics Ltd., 3 EN ISO 15537, Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs (ISO 15537) 4 UIC 651:2002, Layout of drivers cabs in locomotives, railcars, multiple-unit trains and driving trailers 5 EN 16186 (all parts), R
29、ailway applications Drivers cab PD CEN/TR 16823:2015This page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services. BSI is incorporated by Royal Charter. British Standards and other standardizat
30、ion products are published by BSI Standards Limited. British Standards Institution (BSI) BSI Group Headquarters 389 Chiswick High Road London W4 4AL UK About us We bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into st
31、andards -based solutions. The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals. Information on standards We ca
32、n provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre. Buying standards You can buy and download PDF versions of BSI publications, including British and
33、adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team. Subscriptions Our range of subscr
34、iption services are designed to make using standards easier for you. For further information on our subscription products go to With British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/
35、7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to
36、BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit With a Multi-User Network Licence (MUNL) you are able to host standar
37、ds publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current. For further information, email . Revisions Our British Standards and other publications are updated by amendment
38、 or revision. We continually improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre. Copyright All the data, software and documentation set out in all Brit
39、ish Standards and other BSI publications are the property of and copyrighted by BSI, or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use. Except as
40、 permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. Details and advice can be obtained from the C
41、opyright & Licensing Department. Useful Contacts: Customer Services Tel: +44 845 086 9001 Email (orders): Email (enquiries): Subscriptions Tel: +44 845 086 9001 Email: Knowledge Centre Tel: +44 20 8996 7004 Email: Copyright & Licensing Tel: +44 20 8996 7070 Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1