BS PD CLC TR 50378-2-1-2009 Passive components to be nused in optical fibre ncommunication systems — nProduct specifications — nPart 2-1 SC(SC2)-PC connector-type fixed o.pdf

1、raising standards worldwide NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BSI British Standards WB9423_BSI_StandardColCov_noK_AW:BSI FRONT COVERS 5/9/08 12:55 Page 1 Passive components to be used in optical fibre communication systems Product specifications Part 2-1: SC(SC2)

2、-PC connector-type fixed optical attenuators using IEC 60793-2 Category B1.1 singlemode fibre PD CLC/TR 50378-2-1:2009 raising standards worldwide NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BSI British StandardsNational foreword This Published Document is the UK implement

3、ation of CLC/TR 50378-2- 1:2008. The UK participation in its preparation was entrusted by Technical Committee GEL/86, Fibre optics, to Subcommittee GEL/86/2, Fibre optic interconnecting devices and passive components. A list of organizations represented on this committee can be obtained on request t

4、o its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2009 ISBN 978 0 580 57685 0 ICS 33.180.20 Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issu

5、ed since publication Amd. No. Date Text affected BRITISH STANDARD PD CLC/TR 50378-2-1:2009 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2009. TECHNICAL REPORT CLC/TR 50378-2-1 RAPPORT TECHNIQUE TECHNISCHER BERICHT December 2008

6、CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2008 CENELEC - All rights of exploitation in any form and by any means reserved

7、worldwide for CENELEC members. Ref. No. CLC/TR 50378-2-1:2008 E ICS 33.180.20 English version Passive components to be used in optical fibre communication systems - Product specifications - Part 2-1: SC(SC2)-PC connector-type fixed optical attenuators using IEC 60793-2 Category B1.1 singlemode fibre

8、 Composants passifs destins tre utiliss dans les systmes de communication par fibres optiques - Spcifications de produit - Partie 2-1: Affaiblisseurs optiques fixes de type connecteur SC(SC2)-PC utilisant une fibre unimodale de la catgorie B1.1 de la CEI 60793-2 Passive Bauteile zur Verwendung in Li

9、chtwellenleiter- Kommunikationssystemen - Produktnormen - Teil 2-1: Bauart SC(SC2)-PC Steckverbinder mit optischem Dmpfungsglied zum Anschluss an Einmodenfasern der Kategorien B1.1 nach IEC 60793-2 This Technical Report was approved by CENELEC on 2008-06-20. CENELEC members are the national electrot

10、echnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerlan

11、d and the United Kingdom. PD CLC/TR 50378-2-1:2009CLC/TR 50378-2-1:2008 - 2 - Foreword This Technical Report was prepared by the Technical Committee CENELEC TC 86BXA, Fibre optic interconnect, passive and connectorised components. The text of the draft was circulated for voting in accordance with th

12、e Internal Regulations, Part 2, Subclause 11.4.3.3 (simple majority) and was approved by CENELEC as CLC/TR 50378-2-1 on 2008-06-20. _ PD CLC/TR 50378-2-1:2009 - 3 - CLC/TR 50378-2-1:2008 Passive components to be used in optical fibre communication systems Product specifications Part 2-1: SC(SC2)-PC

13、connector-type fixed optical attenuators using IEC 60793-2 Category B1.1 singlemode fibre Description Performance Type: fixed Application: EN 61753-1:2007, Category U ES 201 286 (see 1.3) Style: plug style Operating wavelength: (1 260 - 1 360) nm and (1 460 - 1 625) nm Attenuation: 1 dB, 5 dB and 15

14、 dB Coupling mechanism: push pull Configuration: plug-attenuator- adaptor-plug Fibre category: special fibre Return loss grade: W: 45 dB References: EN 50377-4-4 1)Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 4-4: Type S

15、C-PC simplex terminated on IEC 60793-2-50 category B1.1, B1.3 and B6a singlemode fibre, with full zirconia ferrule Category U EN 61300 series Fibre optic interconnection devices and passive components - Basic test and measurement procedures (IEC 61300 series) EN 61753-1 Fibre optic interconnecting d

16、evices and passive components performance standard - Part 1: General and guidance for performance standards (IEC 61753-1) EN 61753-051-3 Fibre optic interconnecting devices and passive components performance standard - Part 051-3: Single-mode fibre, plug-style fixed attenuators for Category U - Unco

17、ntrolled environment (IEC 61753-051-3) EN 61755-1 Fibre optic connector optical interfaces - Part 1: Optical interfaces for single mode non-dispersion shifted fibres - General and guidance (IEC 61755-1) ETSI ES 201 286 Transmission and Multiplexing (TM); Passive optical components; Connector- type o

18、ptical fixed attenuators for single-mode optical fibre communications systems; Common requirements and conformance testing ETSI EN 300 019 Equipment Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment Outline: 1)At draft stage. PD CLC/TR 50378-2-1:2009

19、CLC/TR 50378-2-1:2008 - 4 - Contents 1 Scope . 5 2 Test samples 5 3 Test program 5 3.1 Spectral attenuation loss (according to EN 61300-3-5). 5 3.2 Polarisation dependent loss (PDL) (according to EN 61300-3-2, option 1). 5 4 Test laboratories involved in this RRT . 5 5 Measurement results 6 5.1 Indi

20、vidual test laboratory results with reference connectors 6 5.1.1 Laboratory A results . 6 5.1.2 Laboratory B results . 8 5.1.3 Laboratory C results . 9 5.1.4 Laboratory D results . 10 5.1.5 Laboratory E results . 11 5.1.6 Laboratory F results . 13 5.1.7 Laboratory G results 15 5.2 Overview of all at

21、tenuation test results . 17 5.3 Attenuation measurements summary . 23 5.4 Attenuation: Random mating versus reference connectors 24 5.5 Overview of PDL results 26 6 Mechanical interface issues with SC plug style attenuators 27 7 Conclusions 27 PD CLC/TR 50378-2-1:2009 - 5 - CLC/TR 50378-2-1:2008 1 S

22、cope This document reports the measurement results of a round robin test program carried out on SC/PC plug style fixed attenuators. The work was initiated at CENELEC TC 86BXA meeting in June 2003 in order to get a clear understanding on the accuracy and repeatability of the spectral attenuation loss

23、 measurements on fixed attenuators. Out of these results some recommendations are made for attenuation tolerance values that can be used in the performance standards. 2 Test samples In total 18 SC/PC plug style fixed attenuators were collected for this round robin test: - 6 attenuators with nominal

24、attenuation of 15 dB (labelled 1, 2, 3, 4, 5 and 6); - 6 attenuators with nominal attenuation of 5 dB (labelled 7, 8, 9, 10, 11 and 12); - 6 attenuators with nominal attenuation of 1 dB (labelled 13, 14, 15, 16, 17 and 18). The attenuators were obtained from various suppliers. The attenuating princi

25、ple of all devices is based on the use of high attenuating fibre. The performance grade of these attenuators is defined as: - operating wavelength range: 1 260 nm-1 360 nm and 1 460 nm-1 580 nm; - attenuation tolerance: 0,5 dB for attenuators 5 dB, 10 % of nominal attenuation value for attenuators 5

26、 dB. 3 Test program All participating test laboratories measured spectral attenuation and polarisation dependent loss for each attenuator. 3.1 Spectral attenuation loss (according to EN 61300-3-5) For the ease of the data processing the measured values were reported for the discrete wavelengths: 1 2

27、60 nm, 1 280 nm, 1 310 nm, 1 330 nm, 1 360 nm, 1 460 nm, 1 490 nm, 1 520 nm, 1 550 nm, 1 570 nm and 1 580 nm. The spectral width was set at 2 nm. Some laboratories also reported values with a spectral width of 10 nm. Each test laboratory performed the measurements with 2 sets of reference connectors

28、 and adapters: - measurements with common reference connectors and adapter (same references for all the test laboratories); - measurements with own test laboratory reference connectors and adapter. Uncertainty of each loss measurement at the above mentioned wavelength range was better than 0,1 dB. 3

29、.2 Polarisation dependent loss (PDL) (according to EN 61300-3-2, option 1) PDL was measured at 1 310 nm and 1 550 nm, with common reference connectors. The accuracy of each PDL measurement was better than 0,1 dB. 4 Test laboratories involved in this RRT The following laboratories were involved in th

30、is round robin test (in alphabetic order): - Adamant Kogyo Co. Ltd (Japan); - Diamond (Switzerland); - Huber and Suhner (Switzerland); - Telekomunikacja Polska (Poland); - TILab (Telecom Italia Laboratories) (Italy); - Tyco Electronics-AMP (the Netherlands); - Tyco Electronics-Raychem (Belgium). PD

31、CLC/TR 50378-2-1:2009CLC/TR 50378-2-1:2008 - 6 - 5 Measurement results 5.1 Individual test laboratory results with reference connectors 5.1.1 Laboratory A results Laboratory A made spectral attenuation measurements using two different light sources: a broadband LED and a tuneable laser in the 1 550

32、nm window. The results are given in Figure 1 (LED) and Figure 2 (LASER). PDL measurements at 1 310 nm and 1 550 nm are listed in Table 1. 15 dB Attenuators - Lab. A 2 nm - Common ref - LED 13.50 14.00 14.50 15.00 15.50 16.00 16.50 17.00 17.50 18.00 1250 1350 1450 1550 Wavelength (nm) Attenuation (dB

33、) 1 2 3 4 5 6 15 dB Attenuators - Lab. A 2 nm - Lab ref - LED 13.50 14.00 14.50 15.00 15.50 16.00 16.50 17.00 17.50 18.00 1250 1350 1450 1550 Wavelength (nm) Attenuation (dB) 1 2 3 4 5 6 5 dB Attenuators - Lab. A 2 nm - Common ref - LED 4.40 4.60 4.80 5.00 5.20 5.40 5.60 5.80 1250 1350 1450 1550 Wav

34、elength (nm) Attenuation (dB) 7 8 9 10 11 12 5 dB Attenuators - Lab. A 2 nm - Lab ref - LED 4.20 4.40 4.60 4.80 5.00 5.20 5.40 5.60 5.80 1250 1350 1450 1550 Wavelength (nm) Attenuation (dB) 7 8 9 10 11 12 1 dB Attenuators - Lab. A 2 nm - Common ref - LED 0.60 0.80 1.00 1.20 1.40 1250 1350 1450 1550

35、Wavelength (nm) Attenuation (dB) 13 14 15 16 17 18 1 dB Attenuators - Lab. A 2 nm - Lab ref - LED 0.60 0.80 1.00 1.20 1.40 1250 1350 1450 1550 Wavelength (nm) Attenuation (dB) 13 14 15 16 17 18Figure 1 - Laboratory A results with 2 nm resolution (LED light source) PD CLC/TR 50378-2-1:2009 - 7 - CLC/

36、TR 50378-2-1:2008 15 dB Attenuators - Lab. A 2 nm - Common ref - LASER 14.00 14.50 15.00 15.50 16.00 16.50 1250 1350 1450 1550 Wavelength (nm) Attenuation (dB) 1 2 3 4 5 6 15 dB Attenuators - Lab. A 2 nm - Lab ref - LASER 14.00 14.50 15.00 15.50 16.00 16.50 17.00 1250 1350 1450 1550 Wavelength (nm)

37、Attenuation (dB) 1 2 3 4 5 6 5 dB Attenuators - Lab. A 2 nm - Common ref - LASER 4.40 4.60 4.80 5.00 5.20 5.40 5.60 1250 1350 1450 1550 Wavelength (nm) Attenuation (dB) 7 8 9 10 11 12 5 dB Attenuators - Lab. A 2 nm - Lab ref - LASER 4.20 4.40 4.60 4.80 5.00 5.20 5.40 5.60 5.80 1250 1350 1450 1550 Wa

38、velength (nm) Attenuation (dB) 7 8 9 10 11 12 1 dB Attenuators - Lab. A 2 nm - Common ref - LASER 0.60 0.80 1.00 1.20 1.40 1250 1350 1450 1550 Wavelength (nm) Attenuation (dB) 13 14 15 16 17 18 1 dB Attenuators - Lab. A 2 nm - Lab ref - LASER 0.40 0.60 0.80 1.00 1.20 1.40 1250 1350 1450 1550 Wavelen

39、gth (nm) Attenuation (dB) 13 14 15 16 17 18Figure 2 - Laboratory A results with 2 nm resolution (LASER light source) Table 1 - PDL measurements from Laboratory A 1234567891 01 11 21 31 41 51 61 71 8 1310 nm 0.75 0.21 0.07 0.08 0.01 0.03 0.01 0.01 0.01 0.01 0.01 0.01 0.02 0.01 0.01 0.05 0.02 0.02 155

40、0 nm 0.12 0.03 0.02 0.02 0.01 0.02 0.01 0.01 0.01 0.01 0.01 0.01 0.02 0.01 0.01 0.01 0.01 0.01 LABORATORY A - PDL COMMON REFPD CLC/TR 50378-2-1:2009CLC/TR 50378-2-1:2008 - 8 - 5.1.2 Laboratory B results Laboratory B made spectral measurements with a 2 nm resolution. The attenuation results for all a

41、ttenuators are shown in Figure 3 (2 nm resolution). PDL measurements at 1 310 nm and 1 550 nm are listed in Table 2. 15 dB Attenuators - Lab. B 2 nm - Common ref 13.50 14.00 14.50 15.00 15.50 16.00 16.50 17.00 1250 1350 1450 1550 Wavelength (nm) Attenuation (dB) 1 2 3 4 5 6 15 dB Attenuators - Lab.

42、B 2 nm - Lab ref 13.50 14.00 14.50 15.00 15.50 16.00 16.50 17.00 1250 1350 1450 1550 Wavelength (nm) Attenuation (dB) 1 2 3 4 5 6 5 dB Attenuators - Lab. B 2 nm - Common ref 4.40 4.60 4.80 5.00 5.20 5.40 5.60 5.80 6.00 1250 1350 1450 1550 Wavelength (nm) Attenuation (dB) 7 8 9 10 11 12 5 dB Attenuat

43、ors - Lab. B 2 nm - Lab ref 4.40 4.60 4.80 5.00 5.20 5.40 5.60 5.80 6.00 1250 1350 1450 1550 Wavelength (nm) Attenuation (dB) 7 8 9 10 11 12 1 dB Attenuators - Lab. B 2 nm - Common ref 0.60 0.80 1.00 1.20 1.40 1.60 1250 1350 1450 1550 Wavelength (nm) Attenuation (dB) 13 14 15 16 17 18 1 dB Attenuato

44、rs - Lab. B 2 nm - Lab ref 0.60 0.80 1.00 1.20 1.40 1.60 1250 1350 1450 1550 Wavelength (nm) Attenuation (dB) 13 14 15 16 17 18Figure 3 - Laboratory B results with 2 nm resolution Table 2 - PDL measurements from Laboratory B 1234567891 01 11 21 31 41 51 61 71 8 1310 nm 0.8 0.16 0.14 0.09 0.06 0.16 0

45、.36 0.08 0.06 0.08 0.06 0.07 0.07 0.06 0.08 0.13 0.08 0.07 1550 nm 0.15 0.06 0.13 0.07 0.06 0.06 0.06 0.07 0.07 0.07 0.12 0.11 0.06 0.07 0.07 0.06 0.08 0.08 LABORATORY B - PDL COMMON REFPD CLC/TR 50378-2-1:2009 - 9 - CLC/TR 50378-2-1:2008 5.1.3 Laboratory C results Laboratory C made spectral attenua

46、tion measurements with a 2 nm resolution. The attenuation results for all attenuators are shown in Figure 4 (2 nm resolution). No PDL measurements were made. 15 dB Attenuators - Lab. C 2 nm - Common ref 13.5 14 14.5 15 15.5 16 16.5 1250 1350 1450 1550 Wavelength (nm) Attenuation (dB) 1 2 3 4 5 6 15

47、dB Attenuators - Lab. C 2 nm - Lab ref 13.5 14 14.5 15 15.5 16 16.5 1250 1350 1450 1550 Wavelength (nm) Attenuation (dB) 1 2 3 4 5 6 5 dB Attenuators - Lab. C 2 nm - Common ref 4.5 4.6 4.7 4.8 4.9 5 5.1 5.2 5.3 5.4 5.5 1250 1350 1450 1550 Wavelength (nm) Attenuation (dB) 7 8 9 10 11 12 5 dB Attenuat

48、ors - Lab. C 2 nm - Lab ref 4.5 4.6 4.7 4.8 4.9 5 5.1 5.2 5.3 5.4 5.5 1250 1350 1450 1550 Wavelength (nm) Attenuation (dB) 7 8 9 10 11 12 1 dB Attenuators - Lab. C 2 nm - Common ref 0.6 0.8 1 1.2 1.4 1.6 1.8 1250 1350 1450 1550 Wavelength (nm ) Attenuation (dB) 13 14 15 16 17 181 dB Attenuators - La

49、b. C 2 nm - Lab ref 0.6 0.8 1 1.2 1.4 1.6 1.8 1250 1350 1450 1550 Wavelength (nm) Attenuation (dB) 13 14 15 16 17 18Figure 4 - Laboratory C results with 2 nm resolution No PDL measurements were performed by laboratory C. PD CLC/TR 50378-2-1:2009CLC/TR 50378-2-1:2008 - 10 - 5.1.4 Laboratory D results Laboratory D made spectral measurements with a 2 nm resolution. The attenuation results for all attenuators are shown in Figure 5 (2 nm resolution). PDL measurements at 1 310 nm and 1 550 nm are shown in Table 3. 15 dB Attenuators - La