BS PD CLC TS 50083-3-3-2014 Cable networks for television signals sound signals and interactive services Active wideband equipment for cable networks Methods of measuremen.pdf

1、BSI Standards Publication Cable networks for television signals, sound signals and interactive services Part 3-3: Active wideband equipment for cable networks Methods of measurement of the maximum operating output level in the return path PD CLC/TS 50083-3-3:2014National foreword This Published Docu

2、ment is the UK implementation of CLC/TS 50083-3-3:2014. The UK participation in its preparation was entrusted by Technical Com- mittee EPL/100, Audio, video and multimedia systems and equipment, to Subcommittee EPL/100/4, Cable distribution equipment and systems. A list of organizations represented

3、on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2014. Published by BSI Standards Limited 2014 ISBN 978 0 580 85

4、962 5 ICS 33.060.40 Compliance with a British Standard cannot confer immunity from legal obligations. This Published Document was published under the authority of the Standards Policy and Strategy Committee on 30 November 2014. Amendments/corrigenda issued since publication Date Text affected PUBLIS

5、HED DOCUMENT PD CLC/TS 50083-3-3:2014 TECHNICAL SPECIFICATION SPCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CLC/TS 50083-3-3 November 2014 ICS 33.060.40 English Version Cable networks for television signals, sound signals and interactive services - Part 3-3: Active wideband equipment for cable net

6、works - Methods of measurement of the maximum operating output level in the return path Rseaux de distribution par cbles pour signaux de tlvision, signaux de radiodiffusion sonore et services interactifs - Partie 3-3: Matriel actifs large bande utiliss dans les rseaux de distribution - Mthodes de me

7、sure du niveau de sortie maximal de fonctionnement dans la voie de retour Kabelnetze fr Fernsehsignale, Tonsignale und interaktive Dienste - Teil 3-3: Aktive Breitbandgerte fr Kabelnetze - Messverfahren fr den maximalen Betriebs-Ausgangspegel im Rckweg This Technical Specification was approved by CE

8、NELEC on 2014-09-30. CENELEC members are required to announce the existence of this TS in the same way as for an EN and to make the TS available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force. CENELEC members are the national elec

9、trotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Ro

10、mania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Bruss

11、els 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. CLC/TS 50083-3-3:2014 E PD CLC/TS 50083-3-3:2014CLC/TS 50083-3-3:2014 - 2 - Contents Page Foreword. 3 Introduction 4 1 Scope . 5 2 Normative references . 5 3 Terms, definitions,

12、symbols and abbreviations 5 3.1 Terms and definitions 5 3.2 Symbols . 7 3.3 Abbreviations 8 4 Method of measurement of the maximum operating output level in the return path 8 4.1 General. 8 4.1.1 Channel load and modulation format . 8 4.1.2 Return path frequency ranges 8 4.1.3 Applied limit values 8

13、 4.2 Measurement parameters for full channel load (N = 6 or N = 8) 9 4.3 Equipment required 9 4.4 Connection of the equipment 10 4.5 Measurement procedure 10 4.6 Presentation of the measurement results 11 4.7 Maximum operating output level for reduced channel loads 11 Annex A (normative) Null packet

14、 and PRBS definitions 12 A.1 Null packet definition . 12 A.2 PRBS definition . 13 Annex B (informative) Calculation formula for the maximum operating output level for reduced channel loads 14 B.1 General. 14 B.2 Measurement results as basis for calculation formula for reduced channel loads 14 B.3 Ca

15、lculation formula for median value 15 B.4 Calculation formula for worst-case value 15 Bibliography . 16 PD CLC/TS 50083-3-3:2014 - 3 - CLC/TS 50083-3-3:2014 Foreword This document (CLC/TS 50083-3-3:2014) has been prepared by CLC/TC 209 “Cable networks for television signals, sound signals and intera

16、ctive services”. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. PD CLC/TS 50083-3-3:2014CLC/TS 50083-3-3:2014 - 4 - Introduction Stan

17、dards and deliverables of EN 60728 series and EN 50083 series deal with cable networks including equipment and associated methods of measurement for headend reception, processing and distribution of television and sound signals and for processing, interfacing and transmitting all kinds of data signa

18、ls for interactive services using all applicable transmission media. These signals are typically transmitted in networks by frequency-multiplexing techniques. This includes for instance regional and local broadband cable networks, extended satellite and terrestrial television distribution systems, i

19、ndividual satellite and terrestrial television receiving systems, and all kinds of equipment, systems and installations used in such cable networks, distribution and receiving systems. The extent of this standardization work is from the antennas and/or special signal source inputs to the headend or

20、other interface points to the network up to the terminal input of the customer premises equipment. The standardization work will consider coexistence with users of the RF spectrum in wired and wireless transmission systems. The standardization of any user terminals (i.e. tuners, receivers, decoders,

21、 multimedia terminals etc.) as well as of any coaxial, balanced and optical cables and accessories thereof is excluded. PD CLC/TS 50083-3-3:2014 - 5 - CLC/TS 50083-3-3:2014 1 Scope This Technical Specification is applicable to the method of nonlinearity measurement for active cable network equipment

22、 which carry a digital channel load in the return path. The digital channel load is represented by standard DVB-C signals. The method of measurement of the maximum operating output level takes account of a full channel load in the return path frequency range although different applications of return

23、 path amplifiers with partial channel load or single channel load are also in practical use. The maximum operating output level for applications with reduced channel loads could be derived from the result with a full channel load by applying a given calculation formula. The method considers the spec

24、ific signal form and behaviour of digitally modulated signals and can be applied in the return path frequency range (5 MHz to 65 MHz) as well as in the extended return path frequency range (5 MHz to 85 MHz) according to EN 60728-10. 2 Normative references The following documents, in whole or in part

25、, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 60728-10, Cable networks for television signals,

26、 sound signals and interactive services Part 10: System performance for return paths (IEC 60728-10) ISO/IEC 13818-1, Information technology Generic coding of moving pictures and associated audio information: Systems Part 1 3 Terms, definitions, symbols and abbreviations For the purposes of this docu

27、ment, the following terms, definitions, symbols and abbreviations apply. 3.1 Terms and definitions 3.1.1 attenuation ratio of the input power to the output power of an equipment or system, usually expressed in decibels 3.1.2 bit error ratio BER ratio between erroneous bits and the total number of tr

28、ansmitted bits 3.1.3 gain ratio of the output power to the input power, usually expressed in decibels 3.1.4 level decibel ratio of any power P 1to the standard reference power P 0 , i.e 0 1 lg 10 P Pdecibel ratio of any voltage U 1to the standard reference voltage U 0 , i.e 0 1 lg 20 U UNote 1 to en

29、try: The power level may be expressed in decibels relative to P 0= (U 0 2 /R) = (1/75) pW, i.e. in dB(P 0 ), taking into account that the level of P 0corresponds to 0 dB(P 0 ) or, as more usually, in dB(pW), taking into account that the level of P 0corresponds to 18,75 dB(pW). The voltage level is e

30、xpressed in decibels relative to 1 V (across 75 ), i.e. in dB(V). PD CLC/TS 50083-3-3:2014CLC/TS 50083-3-3:2014 - 6 - 3.1.5 maximum operating output level (worst-case) U max (N)worst-case of maximum channel output level of a digitally modulated signal in the 64 QAM format with a symbol rate of 6,9 M

31、Symb/s with 15 % cosine roll-off, measured with full digital channel load 3.1.6 maximum operating output level U max,i (N)measured maximum operating output level of a single measurement channel i with full digital channel load 3.1.7 modulation error ratio MER sum of the squares of the magnitudes of

32、the ideal symbol vectors is divided by the sum of the squares of the magnitudes of the symbol error vectors of a sequence of symbols, the result being expressed as a power ratio in dB ( ) ( ) dB in lg 10 1 2 2 1 2 2 + + = = = N j j j N j j j Q I Q I MER 3.1.8 modulation error ratio of EUT MER EUTcal

33、culated value of modulation error ratio of the EUT following Figure 1 and using the following formula Figure 1 Interrelation between different MER contributions Meas Source 10 10 EUT 10 lg 10 10 MER MER MER = Note 1 to entry: The calculation with 10 lg is used for simplification reasons although it

34、is well known that the disturbing signal comprises of noise and nonlinear portions. PD CLC/TS 50083-3-3:2014 - 7 - CLC/TS 50083-3-3:2014 3.1.9 modulation error ratio of complete measurement setup MER Measmeasured value of modulation error ratio of the complete measurement setup according to Figure 1

35、 including the equipment under test (EUT) 3.1.10 modulation error ratio of signal source MER Sourcemeasured value of modulation error ratio of the signal generator when signal generator and measurement receiver are directly connected 3.1.11 slope difference in gain or attenuation at two specified fr

36、equencies between any two points in an equipment or system Note 1 to entry: The slope sign is considered a) negative when the attenuation increases with frequency (cables) or the gain (amplifiers) decreases with frequency, b) positive when the gain (amplifiers) increases with frequency (compensating

37、 slope). 3.2 Symbols The following graphical symbols are used in the figures of this Technical Specification. These symbols are either listed in IEC 60617 or based on symbols defined in IEC 60617. Symbols Terms Symbols Terms Equipment Under Test based on IEC 60617-S00059 (200107) Combiner based on I

38、EC 60617-S00059 (200107) Variable attenuator IEC 60617-S01245 (200107) Amplifier IEC 60617-S01239 (200107 Modulator IEC 60617-S01278 (200107) Demodulator IEC 60617-S01278 (200107 PD CLC/TS 50083-3-3:2014CLC/TS 50083-3-3:2014 - 8 - 3.3 Abbreviations BER bit error ratio BER Sourcebit error ratio of so

39、urce and measurement equipment BER Mess measured bit error ratio value on measuring set DOCSIS Data Over Cable Service Interface Specification DVB Digital Video Broadcasting DVB-C Digital Video Broadcasting, Cable EUT equipment under test MER modulation error ratio MER EUT modulation error ratio of

40、EUT MER Meas modulation error ratio of complete measurement setup MER Source modulation error ratio of signal source PRBS pseudo-random bit sequence QAM quadrature amplitude modulation RF radio frequency U max (N)worst-case of maximum operating output level with channel load of N carriers in the 64

41、QAM format U max,i (N)measured maximum operating output level of a single measurement channel i with N channels load U nCalculated output level for n channels 4 Method of measurement of the maximum operating output level in the return path 4.1 General 4.1.1 Channel load and modulation format The met

42、hod of measurement describes the measurement of the bit error ratio (BER) (before Reed Solomon decoder of the measurement receiver) of the output signal of the equipment under test (EUT) (e.g. a return path amplifier) when handling a full load of digitally modulated DVB-C signals. To simplify matter

43、s, DVB-C signals are used to simulate DOCSIS signals (according to e.g. ETSI EN 302 878, all parts) usually used in cable networks for data transmission purposes. 4.1.2 Return path frequency ranges The method of measurement is applicable in the return path frequency range (5 MHz to 65 MHz) as well a

44、s in the extended return path frequency range (5 MHz to 85 MHz) according to EN 60728-10. For EUT designed for the return path frequency range (5 MHz to 65 MHz), this test is able to define the performance (maximum output level) of the EUT when loaded with a number N = 6 of digitally modulated signa

45、ls in the 64 QAM format covering a maximum frequency range from 16 MHz to 64 MHz for full channel load with a raster of 8 MHz. For EUT designed for the extended return path frequency range (5 MHz to 85 MHz), this test is able to define the performance (maximum output level) of the EUT when loaded wi

46、th a number N = 8 of digitally modulated signals in the 64 QAM format covering a maximum frequency range from 16 MHz to 80 MHz for full channel load with a raster of 8 MHz. 4.1.3 Applied limit values The maximum operating output level is defined for a limit value of the bit error ratio BER 1 10 8 .

47、This limit value corresponds with correct operation and a good quality output of the EUT. PD CLC/TS 50083-3-3:2014 - 9 - CLC/TS 50083-3-3:2014 In addition to this BER limit value, a limit value for the modulation error ratio of MER EUT 35 dB shall be achieved according to the definition in 3.1.7. Th

48、is limit value is above the minimum system requirement for 64 QAM signals which is MER 26 dB and allows a margin to cascade several active equipment in the return path. The measurements shall be performed using the measurement parameters as described hereafter. 4.2 Measurement parameters for full ch

49、annel load (N = 6 or N = 8) The measurement parameters for full channel load are given in Table 1. Table 1 Measurement parameters for full channel load Return path frequency range (5 MHz to 65 MHz) Extended return path frequency range (5 MHz to 85 MHz) Modulation format 64 QAM Symbol rate 6,9 MSymb/s Channel bandwidth 8 MHz Number of channels N 6 8 Channel raster with centre frequencies 20, 28, 36, 44, 52 and 60 MHz 20, 28, 36, 44, 52, 60, 68 and 76 MHz BER li