BS PD CLC TS 50594-2015 Tumble dryers for commercial use Methods for measuring the performance《商用滚筒式烘干机 性能测量方法》.pdf

1、BSI Standards Publication Tumble dryers for commercial use Methods for measuring the performance PD CLC/TS 50594:2015National foreword This Published Document is the UK implementation of CLC/TS 50594:2015. The UK participation in its preparation was entrusted to Technical Committee CPL/59, Performan

2、ce of household electrical appliances. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards

3、Institution 2015. Published by BSI Standards Limited 2015 ISBN 978 0 580 90336 6 ICS 97.060 Compliance with a British Standard cannot confer immunity from legal obligations. This Published Document was published under the authority of the Standards Policy and Strategy Committee on 31 May 2015. Amend

4、ments/corrigenda issued since publication Date Text affected PUBLISHED DOCUMENT PD CLC/TS 50594:2015 TECHNICAL SPECIFICATION SPCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CLC/TS 50594 April 2015 ICS 97.060 English Version Tumble dryers for commercial use - Methods for measuring the performance Ele

5、ktrische Waschgerte fr den kommerziellen Einsatz - Prfverfahren zur Bestimmung der Gebrauchseigenschaften This Technical Specification was approved by CENELEC on 2015-01-26. CENELEC members are required to announce the existence of this TS in the same way as for an EN and to make the TS available pr

6、omptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of

7、Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit

8、 Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. CLC/TS 50594:2015 E PD CL

9、C/TS 50594:2015CLC/TS 50594:2015 2 Contents Page Foreword . 5 1 Scope 6 2 Normative references . 6 3 Terms, definitions and symbols. 6 3.1 Terms and definitions . 6 3.2 List of symbols 9 4 Requirements 10 4.1 General 10 4.2 Rated capacity . 11 4.3 Dimensions 11 5 Test conditions, materials, equipmen

10、t and instrumentation 12 5.1 General 12 5.2 Ambient conditions . 12 5.2.1 Electricity supply . 12 5.2.2 Water supply 12 5.2.3 Ambient temperature and humidity 13 5.3 Test materials 13 5.3.1 General . 13 5.3.2 Test load 14 5.3.3 Detergent . 14 5.4 Equipment 14 5.4.1 Equipment for normalization . 14 5

11、.4.2 Equipment for conditioning the test load . 14 5.4.3 Equipment for wetting the test load prior to a test 14 5.4.4 Equipment for measurement . 14 5.5 Instrumentation and accuracy 15 6 Preparation for testing . 16 6.1 General 16 6.2 Test specifications from manufacturers 16 6.3 Installation of the

12、 tumble dryer 16 6.4 Preparation of the tumble dryer for a test series . 17 6.5 Preparation of the tumble dryer for a test run . 17 6.6 Preparation of test loads. 17 6.6.1 General . 17 6.6.2 Pre-treatment of new test load items prior to use 18 6.6.3 Requirements regarding the age of test load items

13、. 18 6.6.4 Normalization of test load items . 18 6.6.5 Conditioning of test load items . 18 6.6.6 Test load composition . 19 6.6.7 Wetting . 21 7 Performance measurements General requirements . 22 8 Tests for performance 23 8.1 General 23 PD CLC/TS 50594:2015 3 CLC/TS 50594:2015 8.2 Test procedure f

14、or performance tests 23 8.2.1 Test conditions, materials and preparation for testing . 23 8.2.2 Programme . 23 8.2.3 Test load 24 8.2.4 Test procedure . 24 8.2.5 Validity of a test run 24 8.2.6 Validity of a test series 24 8.3 Measurements to determine water and energy consumption and programme time

15、 25 8.3.1 General . 25 8.3.2 Procedure. 25 8.4 Measurements to determine condensation efficiency . 25 8.4.1 General . 25 8.4.2 Procedure. 25 8.5 Measurements to determine exhaust air volume . 26 8.6 Performance measurement at maximum exhaust duct pressure 26 8.7 Measurement of the textile drying tem

16、perature . 26 9 Assessment of performance 26 9.1 General 26 9.2 Final moisture content of the load 26 9.3 Total energy . 27 9.4 Corrected energy . 27 9.5 Corrected water consumption 28 9.6 Corrected programme time . 28 9.7 Condensation efficiency . 29 9.8 Evaporation capacity. 30 9.9 Exhaust air vol

17、ume 30 10 Data to be reported . 30 Annex A (normative) Reference list . 31 Annex B (normative) Exhaust ducts for tumble dryer testing . 32 Annex C (informative) Flow diagrams 37 Annex D (normative) Test report Data to be reported 39 Annex E (normative) Procedure to determine test load size where rat

18、ed capacity is not declared 43 Annex F (normative) Flexible initial moisture content method . 44 Annex G (normative) Performance testing of steam heated tumble dryers . 46 Annex H (informative) Performance testing of gas heated tumble dryers 54 Annex I (informative) Measurement of exhaust air volume

19、 . 55 Annex J (normative) Measurement of the textile drying temperature 56 Bibliography 58 Figure B.1 Exhaust duct bend . 32 Figure B.2 Exhaust duct Type 2 34 Figure C.1 . 37 Figure C.2 . 38 Figure G.1 Schematic installation of the measurement equipment for steam heated tumble dryers (Alternative 1)

20、. 48 PD CLC/TS 50594:2015CLC/TS 50594:2015 4 Figure G.2 Schematic installation of the measurement equipment for steam heated tumble dryers (Alternative 2). 50 Table 1 List of symbols 9 Table 2 Specification of instruments . 16 Table 3 Number of items in the test load for various test load masses . 1

21、9 Table 4 Specifications for initial moisture content in the test load . 22 Table 5 Specification for final moisture content of the test load after drying in a cotton dry programme . 23 Table B.1 Equivalent tube length of a 90 bend 33 Table B.2 Pressure drop values for different diameters and flows

22、for a 15 m long duct . 35 Table D.1 Identification data 39 Table D.2 Test measurements 40 Table D.3 Test conditions and materials . 42 Table J.1 Specification of temperature logger suitable for temperature measurement for both washing and drying . 56 Table J.2 Number of temperature loggers to be use

23、d during a textile drying temperature measurement . 57 PD CLC/TS 50594:2015 5 CLC/TS 50594:2015 Foreword This document (CLC/TS 50594:2015) has been prepared by CLC/TC 59X “Performance of household and similar electrical appliances“. Attention is drawn to the possibility that some of the elements of

24、this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association. This document is a n

25、ew Technical Specification, but it is based on portions from EN 61121:2013. This Technical Specification is the main body of a forthcoming European Standard for measuring the performance of non-household tumble dryers. The content of this Technical Specification will be added with the Annex ZZ when

26、the details regarding Ecodesign regulations are defined. The procedures described in this Technical Specification are modified substantially compared to the procedures described in EN 61121. Therefore, results of tests according to this Technical Specification cannot and are bound not to be compared

27、 to results of similar procedures of EN 61121. Significant technical differences from EN 61121 are: a) test procedures for tumble dryers of any size on the market; b) a test procedure for measuring power consumption also for steam heated and gas heated tumble dryers; c) the introduction of a new typ

28、e of base load; d) the introduction of a new initial moisture level. NOTE CLC/TS 50640:2015 is planned to be a European Standard for the energy measurement of gas heated laundry equipment. A bilingual version of this publication may be issued at a later date. PD CLC/TS 50594:2015CLC/TS 50594:2015 6

29、1 Scope This Technical Specification is applicable to tumble dryers for commercial use of the automatic and non-automatic type, incorporating an electric or steam heating device. It also includes tumble dryers which use gas as a heating source with a reference to appropriate EN gas standards. The ob

30、ject is to state and define the principal performance characteristics of tumble dryers for commercial use of interest to users and to describe standard methods for measuring these characteristics. NOTE It does not apply to transfer tumble dryers or dryers with automatic loading and unloading. 2 Norm

31、ative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments)

32、 applies. EN 12953-10, Shell boilers Part 10 : Requirements for feedwater and boiler water quality EN 50570:2013, Household and similar electrical appliances Safety Particular requirements for commercial electric tumble dryers CLC/TS 50640:2015, Clothes washing machines for commercial use Methods fo

33、r measuring the performance EN 60456:2011, Clothes washing machines for household use Methods for measuring the performance (IEC 60456:2010, modified) EN 60734, Household electrical appliances Performance Water for testing (IEC 60734) EN 62053-21, Electricity metering equipment (a.c.) Particular req

34、uirements Part 21: Static meters for active energy (classes 1 and 2) (IEC 62053-21) ISO 80000-1:2009, Quantities and units Part 1: General 3 Terms, definitions and symbols 3.1 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1.1 tumble dryer appli

35、ance in which textiles are dried by tumbling in a rotating drum, through which air is passed 3.1.2 air vented tumble dryer tumble dryer that draws in fresh air which is passed over the textiles and where the resulting moist air is exhausted into the room or vented outside 3.1.3 condenser tumble drye

36、r tumble dryer which includes a device for removing moisture from the air used for the drying process PD CLC/TS 50594:2015 7 CLC/TS 50594:2015 3.1.4 automatic tumble dryer tumble dryer which switches off the drying process when a certain moisture content of the load is reached Note 1 to entry: This

37、may include systems that use conductivity or temperature sensing. 3.1.5 non-automatic tumble dryer tumble dryer which does not switch off the drying process when a certain moisture content of the load is reached, usually controlled by a timer, but may also be controlled manually 3.1.6 transfer tumbl

38、e dryer tumble dryer with automatic loading and unloading via conveyers or by other means Note 1 to entry: The loading and unloading conveyers are often located on opposite sides of the drying basket. 3.1.7 test load textile load used for testing 3.1.8 pre-treatment processing of a new test load pri

39、or to its first use to avoid rapid changes of characteristics during the tests 3.1.9 conditioning bringing the test load into thermodynamic equilibrium with the defined ambient air conditions of temperature and humidity Note 1 to entry: The process of conditioning is not the same as wetting which is

40、 described in 6.6.7. 3.1.10 test run single performance assessment 3.1.11 test series group of test runs on a tumble dryer which, collectively, are used to assess the performance of that tumble dryer 3.1.12 operation performance of a function that occurs during the tumble dryer drying process such a

41、s heating up, drying, cooling, anti-creasing 3.1.13 programme series of operations which are pre-defined within the tumble dryer and which are declared by the manufacturer as suitable for drying certain types of textiles 3.1.14 end of the programme moment in time when the tumble dryer indicates the

42、programme is complete and the load is accessible to the user PD CLC/TS 50594:2015CLC/TS 50594:2015 8 3.1.15 programme time period of time from the initiation of the programme (excluding any user programmed delay) until the end of the programme 3.1.16 cycle complete drying process, as defined by the

43、selected programme, consisting of a series of operations including any operations that occur after the end of the programme Note 1 to entry: Examples of operations that may occur after the completion of the programme are monitoring and anti- creasing operations (where applicable). 3.1.17 cycle time

44、period of time from the initiation of the programme (excluding any user programmed delay) until all activity ceases Note 1 to entry: Activity is considered to have ceased when the power consumption reverts to a steady state condition that persists indefinitely without user intervention. If there is

45、no activity after the end of the programme, the cycle time is equal to the programme time. Note 2 to entry: Cycle time includes any activity that may occur for a limited period after the end of the programme. Any cyclic event that occurs indefinitely is considered to be steady-state. 3.1.18 normaliz

46、ation processing of a test load after a pre-determined number of cycles to bring the test load to a normal state prior to testing 3.1.19 rated capacity maximum mass in kilograms of dry textiles of a particular defined type, which the manufacturer declares can be treated in a specific programme 3.1.2

47、0 test load mass actual mass of the test load 3.1.21 conditioned test load mass mass of the test load when conditioned to correct humidity and temperature defined in 5.2.3.2 3.1.22 nominal test load mass mass of dry textiles of a particular type for which the performance of the tumble dryer will be

48、tested (rated capacity or part load) Note 1 to entry: Target value toward which the conditioned test load mass will be adjusted. SOURCE: EN 61121:2013, 3.1.20, modified The second part of the definition has been turned into the present Note 1 to entry. 3.1.23 moisture content ratio of the difference

49、 between test load mass and the conditioned test load mass to the conditioned test load mass expressed in percent PD CLC/TS 50594:2015 9 CLC/TS 50594:2015 3.1.24 initial moisture content moisture content of a test load prior to a test run 3.1.25 final moisture content moisture content of a test load at the end of a test run 3.1.26 rated voltage voltage assigned to the appliance by the manufacturer 3.2 List of symbols The symbols are listed in Table 1. Table 1 List of symbols S