1、Electricity metering data exchange The DLMS/COSEM suite Part 8-20: Mesh communication profile for neighbourhood networks PD IEC/TS 62056-8-20:2016 BSI Standards Publication WB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National foreword This Published Document is the UK implementation of I
2、EC/TS 62056-8-20:2016. The UK participation in its preparation was entrusted to Technical Committee PEL/13, Electricity Meters. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions
3、 of a contract. Users are responsible for its correct application. The British Standards Institution 2016. Published by BSI Standards Limited 2016 ISBN 978 0 580 89772 6 ICS 17.220.01; 35.110; 91.140.50 Compliance with a British Standard cannot confer immunity from legal obligations. This Published
4、Document was published under the authority of the Standards Policy and Strategy Committee on 30 November 2016. Amendments/corrigenda issued since publication Date Text affected PUBLISHED DOCUMENT PD IEC/TS 62056-8-20:2016 IEC TS 62056-8-20 Edition 1.0 2016-11 TECHNICAL SPECIFICATION Electricity mete
5、ring data exchange The DLMS/COSEM suite Part 8-20: Mesh communication profile for neighbourhood networks INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 17.220; 35.110; 91.140.50 ISBN 978-2-8322-3682-6 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you ob
6、tained this publication from an authorized distributor. colour inside PD IEC/TS 62056-8-20:2016 2 IEC TS 62056-8-20:2016 IEC 2016 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references 7 3 Terms, definitions and abbreviated terms 8 3.1 Terms and definitions 8 3.2 Abbreviated terms .
7、 9 4 Targeted communication environments Overview . 10 5 Use of the communication layers for this profile . 12 5.1 Information related to the use of the specification specifying the lower layers . 12 5.2 The structure of the profile supporting network meshed communications 12 5.3 Lower protocol laye
8、rs and their use. 13 5.3.1 Overview . 13 5.3.2 Physical layer 13 5.3.3 MAC layer 13 5.3.4 Service mapping and adaptation layers . 13 5.3.5 Network layer 14 5.3.6 Transport layer 14 5.4 Service mapping and adaptation layers . 14 5.4.1 Service mapping 14 5.4.2 Protocol_Connection_Parameters of the COS
9、EM-OPEN service 14 5.5 Registration and connection management . 14 5.5.1 Overview . 14 5.5.2 Connectivity management 14 5.5.3 Registration . 15 6 Identification and addressing scheme 17 6.1 Overview. 17 6.2 Network addressing 18 6.2.1 General . 18 6.2.2 Node migration 19 6.3 Transport addressing 19
10、6.3.1 Overview . 19 6.3.2 UDP port . 19 6.3.3 Default UDP ports 19 6.4 Wrapper addressing 19 7 Specific considerations for the application layer services . 20 7.1 Overview. 20 7.2 Application association establishment and release: ACSE services . 20 7.2.1 Application associations 20 7.2.2 Applicatio
11、n association life time . 20 7.2.3 COSEM-OPEN and COSEM-RELEASE service parameters . 20 7.3 xDLMS services 21 7.4 Security mechanisms 21 7.4.1 General . 21 7.4.2 Broadcast 21 PD IEC/TS 62056-8-20:2016IEC TS 62056-8-20:2016 IEC 2016 3 7.4.3 Lower layers security . 21 7.5 Transferring long application
12、 messages 22 7.6 Media access, bandwidth and timing considerations . 22 7.7 Other considerations . 22 8 Communication configuration and management . 22 8.1 Overview. 22 8.2 Group management 22 8.3 Delayed and randomized response . 22 9 The COSEM application process . 23 10 Additional considerations
13、for the use of this profile 23 Annex A (informative) Address management process example 24 A.1 Registration management . 24 A.2 IP address publication . 24 A.2.1 General . 24 A.2.2 Address lookup 25 Figure 1 Mesh neighbourhood network within an AMI environment. 10 Figure 2 Entities and interfaces of
14、 a smart metering system . 12 Figure 3 The DLMS/COSEM mesh communication profile 13 Figure 4 Identification and addressing scheme . 18 Figure A.1 Registration management process 25 Table 1 Send_destination_and_method attribute 16 Table 2 Address registration data 16 Table 3 Address update data . 16
15、Table 4 Client and server SAPs . 19 PD IEC/TS 62056-8-20:2016 4 IEC TS 62056-8-20:2016 IEC 2016 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ELECTRICITY METERING DATA EXCHANGE THE DLMS/COSEM SUITE Part 8-20: Mesh communication profile for neighbourhood networks FOREWORD 1) The International Electrote
16、chnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To t
17、his end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC Nationa
18、l Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO
19、) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation fr
20、om all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be h
21、eld responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any
22、divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to
23、IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual
24、 experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this
25、IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this
26、IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. The International Electrotechnical Commission (IEC) draws attention to the fact that it is claimed that compliance with this Technical Specification may involve the u
27、se of a maintenance service concerning the stack of protocols on which the present specification IEC 62056-8-20 is based. The IEC takes no position concerning the evidence, validity and scope of this maintenance service. The provider of the maintenance service has assured the IEC that he is willing
28、to provide services under reasonable and non-discriminatory terms and conditions for applicants throughout the world. In this respect, the statement of the provider of the maintenance service is registered with the IEC. Information may be obtained from: DLMS User Association Zug/Switzerland PD IEC/
29、TS 62056-8-20:2016IEC TS 62056-8-20:2016 IEC 2016 5 The main task of IEC technical committees is to prepare International Standards. In exceptional circumstances, a technical committee may propose the publication of a technical specification when the required support cannot be obtained for the publi
30、cation of an International Standard, despite repeated efforts, or the subject is still under technical development or where, for any other reason, there is the future but no immediate possibility of an agreement on an International Standard. Technical specifications are subject to review within thre
31、e years of publication to decide whether they can be transformed into International Standards. IEC TS 62056-8-20, which is a technical specification, has been prepared by technical committee 13: Electrical energy measurement and control. The text of this technical specification is based on the follo
32、wing documents: Enquiry draft Report on voting 13/1673/DTS 13/1704/RVC Full information on the voting for the approval of this technical specification can be found in the report on voting indicated in the above table. This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
33、A list of all parts in the IEC 62056 series, published under the general title Electricity metering data exchange The DLMS/COSEM suite, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC
34、 website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be transformed into an International standard, reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a late
35、r date. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer. PD IEC/TS 62056-8-20:2016 6 IEC TS 620
36、56-8-20:2016 IEC 2016 INTRODUCTION As defined in IEC 62056-1-0, the IEC 62056 DLMS/COSEM suite provides specific communication profile standards for communication media relevant for smart metering. Such communication profile standards specify how the COSEM data model and the DLMS/COSEM application l
37、ayer can be used on the lower communication media-specific protocol layers. Communication profile standards refer to communication standards that are part of the IEC 62056 DLMS/COSEM suite or to any other open communication standard. This Technical Specification specifies a DLMS/COSEM IPv6 based com
38、munication profile that can be used in large scale AMI deployments where the Neighbourhood Networks are mesh networks. The communication profile specified in this Technical Specification can be used over various suitable technologies providing a Neighbourhood Network with mesh topology, as long as t
39、hey are capable to carry IPv6 traffic. This specification follows the rules defined in IEC 62056-5-3:2016, Annex A. The communication profile specified in this specification addresses the specificities resulting from the properties of the mesh network and the large quantity of devices to be managed.
40、 PD IEC/TS 62056-8-20:2016IEC TS 62056-8-20:2016 IEC 2016 7 ELECTRICITY METERING DATA EXCHANGE THE DLMS/COSEM SUITE Part 8-20: Mesh communication profile for neighbourhood networks 1 Scope This part of IEC 62056 specifies a DLMS/COSEM communication profile that can be used in a smart metering system
41、 in which the Neighbourhood Networks (NN) are mesh networks. This profile may be considered as an adaptation and extension of the UDP/IP communication profile specified in IEC 62056-9-7:2013. As in that standard, the PHY and MAC layers are out of the Scope. This Technical Specification specifies a n
42、umber of features essential to the efficient operation of a large scale AMI using mesh NNs. These features include: identification of the DLMS/COSEM client and server participating in an application association (AA) with their system title, so that this identification does not change when the IP add
43、ress of the server changes, see Clause 6; a mechanism to inform the client of the binding between the servers system title and its current IP address(es), see 5.5.3; the use of the DLMS/COSEM UDP based transport layer, that allows keeping DLMS/COSEM AAs open for long periods, while the device may le
44、ave and join the mesh NN and/or its IP address may change, see 7.2.2; DLMS/COSEM application layer and application process level security features that can be used in a mesh environment, see 7.4.2; a mechanism to organize servers to one or more groups based on various conditions, so that the request
45、s can be broadcasted to all devices attached to the mesh network, but only those servers belonging to the group carry out the request and respond, see 8.2; a mechanism that allows to send the response to a request in designated time windows and with a randomized delay, see 8.3. the use of a specific
46、 UDP port that allows efficient UDP header compression, see 6.3.3. The Scope of this communication profile specification is restricted to aspects concerning the use of communication protocols in conjunction with the COSEM data model and the DLMS/COSEM application layer. Any project specific definiti
47、ons of data structures and data contents may be provided in project specific companion specifications. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the
48、edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60050 (all parts), International Electrotechnical Vocabulary (IEV) (available at www.electropedia.org) IEC TR 62051, Electricity metering Glossary of terms PD IEC/TS 6
49、2056-8-20:2016 8 IEC TS 62056-8-20:2016 IEC 2016 IEC TR 62051-1, Electricity metering Data exchange for meter reading, tariff and load control Glossary of terms Part 1: Terms related to data exchange with metering equipment using DLMS/COSEM IEC 62056-1-0, Electricity metering data exchange The DLMS/COSEM suite Part 1-0: Smart metering standardisation framework IEC 62056-4-7, Electricity metering data exchange The DLMS/COSEM suite Part
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1