BS PD ISO TS 21219-9-2016 Intelligent transport systems Traffic and travel information (TTI) via transport protocol experts group generation 2 (TPEG2) Service and network informati.pdf

1、BSI Standards Publication Intelligent transport systems Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) Part 9: Service and network information (TPEG2-SNI) PD ISO/TS 21219-9:2016National foreword This Published Document is the UK implementation of ISO/

2、TS 21219-9:2016. The UK participation in its preparation was entrusted to Technical Committee EPL/278, Intelligent transport systems. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary prov

3、isions of a contract. Users are responsible for its correct application. The British Standards Institution 2016. Published by BSI Standards Limited 2016 ISBN 978 0 580 89244 8 ICS 03.220.01; 35.240.60 Compliance with a British Standard cannot confer immunity from legal obligations. This Published Do

4、cument was published under the authority of the Standards Policy and Strategy Committee on 30 April 2016. Amendments/corrigenda issued since publication Date Text affected PUBLISHED DOCUMENT PD ISO/TS 21219-9:2016 ISO 2016 Intelligent transport systems Traffic and travel information (TTI) via transp

5、ort protocol experts group, generation 2 (TPEG2) Part 9: Service and network information (TPEG2-SNI) Systmes intelligents de transport Informations sur le trafic et le tourisme via le groupe expert du protocole de transport, gnration 2 (TPEG2) Partie 9: Information de service et de reseau (TPEG2-SNI

6、) TECHNICAL SPECIFICATION ISO/TS 21219-9 Reference number ISO/TS 21219-9:2016(E) First edition 2016-04-01 PD ISO/TS 21219-9:2016 ISO/TS 21219-9:2016(E)ii ISO 2016 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO 2016, Published in Switzerland All rights reserved. Unless otherwise specified, no p

7、art of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member

8、body in the country of the requester. ISO copyright office Ch. de Blandonnet 8 CP 401 CH-1214 Vernier, Geneva, Switzerland Tel. +41 22 749 01 11 Fax +41 22 749 09 47 copyrightiso.org www.iso.org PD ISO/TS 21219-9:2016 ISO/TS 21219-9:2016(E)Foreword v Introduction vii 1 Scope . 1 2 Normative referenc

9、es 1 3 Terms and definitions . 1 4 Abbreviated terms 4 5 Application specific constraints . 5 5.1 Application identification 5 5.2 Version number signalling 5 5.3 TPEG 1 binary compatibility of SNI 5 5.4 TPEG Service Component Frame. 5 5.5 Conceptual model Multiplexed applications and services . 5 6

10、 Design principle 6 6.1 Variable content referencing . 6 6.2 Example of the TPEG-SNI application in a TPEG data-stream . 7 6.3 Concept of allocating services 8 6.4 General rules for the TPEG-SNI application 10 7 SNI Structure 11 8 SNI Message components11 8.1 SNI1Template 11 8.1.1 General.11 8.1.2 U

11、sage of the version number .12 8.2 CurrentServiceInformation .12 8.3 ServiceLogo .12 8.4 SubscriberInformation 13 8.5 FreeTextInformation .13 8.6 HelpInformation .13 8.7 GST_GuideToServiceTables 13 8.8 GST1_FastTuningTable 14 8.9 GST2_TimeScheduleTable 15 8.10 GST3_ContentDescription 15 8.11 GST4_Ge

12、ographicalCoverage .16 8.12 GST5_ServiceComponentReset 16 8.13 GST6_ConditionalAccessInformationReference 16 8.14 GST7_Versioning .16 8.15 GST_ServiceTableAccelerator 17 8.16 LinkageToSameService .17 8.17 Same Service Definition .18 8.18 LinkageToRelatedService 19 8.19 Reserved for future use 19 8.2

13、0 BearerLinkageInfoDAB .19 8.21 BearerLinkageInfoDARC 19 8.22 BearerLinkageInfoDVB .19 8.23 BearerLinkageInfoURL20 8.24 BearerLinkageInfoHDRadio 20 8.25 SIT_ServiceInformationTables 20 8.26 SIT1_NumberOfMessages .21 9 SNI Datatypes 22 9.1 MaskedTime .22 9.2 DayMask 22 9.3 AppStartTime 22 ISO 2016 Al

14、l rights reserved iii Contents Page PD ISO/TS 21219-9:2016 ISO/TS 21219-9:2016(E)9.4 TimeSlot .23 9.5 OpTime .23 9.6 GeographicCoverage24 9.7 CoordinatePair .24 9.8 ByteField24 9.9 GST1_Entry 24 9.10 GST2_Entry 25 9.11 GST3_Entry 26 9.12 GST4_Entry 26 9.13 GST5_Entry 26 9.14 GST6_Entry 26 9.15 GST7_

15、Entry 27 9.16 RelatedServiceEntry 27 9.17 DABFrequency 28 9.18 DVBFrequency 28 9.19 FMFrequency .28 9.20 AMFrequency 28 9.21 SameServiceEntry .29 9.22 SIT1_Entry30 9.23 HDRadioStationID .30 9.24 HDFMBearerInfo 31 9.25 HDAMBearerInfo 31 10 SNI Tables 31 10.1 sni001:GraphicType 31 10.2 sni002:Characte

16、rEncoding 32 Annex A (normative) TPEG SNI, TPEG-Binary Representation 33 Annex B (normative) TPEG SNI, tpegML representation 49 Bibliography .62 iv ISO 2016 All rights reserved PD ISO/TS 21219-9:2016 ISO/TS 21219-9:2016(E) Foreword ISO (the International Organization for Standardization) is a worldw

17、ide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on th

18、at committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. The procedures used to develop this doc

19、ument and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directi

20、ves, Part 2 (see www.iso.org/directives). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the developm

21、ent of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents). Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement. For an explanation on the meaning of ISO sp

22、ecific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information. The committee responsible for this document is ISO/TC 204 Intelligent

23、 transport systems, in cooperation with the Traveller Information Services Association (TISA), TPEG Applications Working Group through Category A Liaison status. ISO/TS 21219 consists of the following parts, under the general title Intelligent transport systems Traffic and travel information (TTI) v

24、ia transport protocol experts group, generation 2 (TPEG2): Part 1: Introduction, numbering and versions Part 2: UML modelling rules Part 3: UML to binary conversion rules Part 4: UML to XML conversion rules Part 5: Service framework Part 6: Message management container Part 9: Service and network in

25、formation Part 10: Conditional access information Part 14: Parking information application Part 15: Traffic event compact Part 18: Traffic flow and prediction application Part 19: Weather information The following parts are under preparation: Part 16: Fuel price information and availability applicat

26、ion ISO 2016 All rights reserved v PD ISO/TS 21219-9:2016 ISO/TS 21219-9:2016(E) The following parts are planned: Part 7: Location referencing container Part 20: Extended TMC location referencing Part 21: Geographic location referencing Part 22: OpenLR location referencing Part 23: Roads and multi-m

27、odal routes application Part 24: Light encryption Part 25: Electromobility information vi ISO 2016 All rights reserved PD ISO/TS 21219-9:2016 ISO/TS 21219-9:2016(E) Introduction History TPEG technology was originally proposed by the European Broadcasting Union (EBU) Broadcast Management Committee, w

28、ho established the B/TPEG project group in the autumn of 1997 with a brief to develop, as soon as possible, a new protocol for broadcasting traffic and travel-related information in the multimedia environment. TPEG technology, its applications and service features were designed to enable travel-rela

29、ted messages to be coded, decoded, filtered and understood by humans (visually and/or audibly in the users language) and by agent systems. Originally, a byte-oriented data stream format, which can be carried on almost any digital bearer with an appropriate adaptation layer, was developed. Hierarchic

30、ally structured TPEG messages from service providers to end-users were designed to transfer information from the service provider database to an end-users equipment. One year later in December 1998, the B/TPEG group produced its first EBU specifications. Two documents were released. Part 2 (TPEG-SSF

31、, which became ISO/TS 18234-2) described the Syntax, Semantics and Framing structure, which was used for all TPEG applications. Meanwhile, Part 4 (TPEG- RTM, which became ISO/TS 18234-4) described the first application, for Road Traffic Messages. Subsequently in March 1999, CEN TC 278, in conjunctio

32、n with ISO/TC 204, established a group comprising members of the former EBU B/TPEG and this working group continued development work. Further parts were developed to make the initial set of four parts, enabling the implementation of a consistent service. Part 3 (TPEG-SNI, ISO/TS 18234-3) described t

33、he Service and Network Information Application, used by all service implementations to ensure appropriate referencing from one service source to another. Part 1 (TPEG-INV, ISO/TS 18234-1) completed the series by describing the other parts and their relationship; it also contained the application IDs

34、 used within the other parts. Additionally, Part 5, the Public Transport Information Application (TPEG-PTI, ISO/TS 18234-5), was developed. The so-called TPEG-LOC location referencing method, which enabled both map-based TPEG-decoders and non-map- based ones to deliver either map-based location refe

35、rencing or human readable text information, was issued as ISO/TS 18234-6 to be used in association with the other applications parts of the ISO/TS 18234 series to provide location referencing. The ISO/TS 18234 series has become known as TPEG Generation 1. TPEG Generation 2 When the Traveller Informa

36、tion Services Association (TISA), derived from former Forums, was inaugurated in December 2007 TPEG development was taken over by TISA and continued in the TPEG Applications Working Group. It was about this time that the (then) new Unified Modelling Language (UML) was seen as having major advantages

37、 for the development of new TPEG Applications in communities who would not necessarily have binary physical format skills required to extend the original TPEG TS work. It was also realized that the XML format for TPEG described within the ISO/TS 24530 series (now superseded) had a greater significan

38、ce than previously foreseen; especially in the content-generation segment and that keeping two physical formats in synchronism, in different standards series, would be rather difficult. As a result, TISA set about the development of a new TPEG structure that would be UML based, this has subsequently

39、 become known as TPEG Generation 2. TPEG2 is embodied in the ISO/TS 21219 series and it comprises many parts that cover introduction, rules, toolkit and application components. TPEG2 is built around UML modelling and has a core of rules that contain the modelling strategy covered in Parts 2, 3, 4 an

40、d the conversion to two current physical formats: binary and XML; others could be added in the future. TISA uses an automated tool to convert from the agreed UML model XMI file directly into an MS Word document file, to minimize drafting errors, that forms the Annex for each physical format. ISO 201

41、6 All rights reserved vii PD ISO/TS 21219-9:2016 ISO/TS 21219-9:2016(E) TPEG2 has a three container conceptual structure: Message Management (Part 6), Application (many Parts) and Location Referencing (Part 7). This structure has flexible capability and can accommodate many differing use cases that

42、have been proposed within the TTI sector and wider for hierarchical message content. TPEG2 also has many location referencing options as required by the service provider community, any of which may be delivered by vectoring data included in the Location Referencing Container. The following classific

43、ation provides a helpful grouping of the different TPEG2 parts according to their intended purpose: Toolkit parts: TPEG2-INV (part 1), TPEG2-UML (part 2), TPEG2-UBCR (part 3), TPEG2- UXCR (part 4), TPEG2-SFW (part 5), TPEG2-MMC (part 6), TPEG2-LRC (part 7); Special applications: TPEG2-SNI (part 9),

44、TPEG2-CAI (part 10); Location referencing: TPEG2-ULR (part 11), TPEG2-ETL (part 20), TPEG2-GLR (part 21), TPEG2- OLR (part 22); Applications: TPEG2-PKI (part 14), TPEG2-TEC (part 15), TPEG2-FPI (part 16), TPEG2- TFP (part 18), TPEG2-WEA (part 19), TPEG2-RMR (part 23). TPEG2 has been developed to be

45、broadly (but not totally) backward compatible with TPEG1 to assist in transitions from earlier implementations, while not hindering the TPEG2 innovative approach and being able to support many new features, such as dealing with applications having both long-term, unchanging content and highly dynami

46、c content, such as Parking Information. This Technical Specification is based on the TISA specification technical/editorial version reference: SP13006/3.2/001 The International Organization for Standardization (ISO) (and/or) International Electrotechnical Commission (IEC) draws attention to the fact

47、 that it is claimed that compliance with this Technical Specification may involve the use of a patent concerning “the HD Radio Bearer and Linkage Information” given in 10.5. ISO and/or IEC takes no position concerning the evidence, validity and scope of this patent right. The holder of this patent r

48、ight has ensured the ISO (and/or) IEC that he/she is willing to negotiate licences under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statement of the holder of this patent right is registered with ISO (and/or) IEC. Information may

49、 be obtained from the following. iBiquity Digital Corporation 6711 Columbia Gateway Drive, Suite 500 Columbia, MD 21046 USAviii ISO 2016 All rights reserved PD ISO/TS 21219-9:2016 Intelligent transport systems Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) Part 9: Service and network information (TPEG2-SNI) 1 Scope This part of ISO/TS 21219 establishes the method of delivering service and network information within a TPEG service.