1、Recommended Practice for Care and Use of Fiberglass TubularsAPI RECOMMENDED PRACTICE 15TL4SECOND EDITION, MARCH 1999REAFFIRMED, OCTOBER 2013Recommended Practice for Care and Use of Fiberglass TubularsUpstream SegmentAPI RECOMMENDED PRACTICE 15TL4SECOND EDITION, MARCH 1999REAFFIRMED, OCTOBER 2013SPEC
2、IAL NOTESAPI publications necessarily address problems of a general nature. With respect to partic-ular circumstances, local, state, and federal laws and regulations should be reviewed.API is not undertaking to meet the duties of employers, manufacturers, or suppliers towarn and properly train and e
3、quip their employees, and others exposed, concerning healthand safety risks and precautions, nor undertaking their obligations under local, state, or fed-eral laws.Information concerning safety and health risks and proper precautions with respect to par-ticular materials and conditions should be obt
4、ained from the employer, the manufacturer orsupplier of that material, or the material safety data sheet.Nothing contained in any API publication is to be construed as granting any right, byimplication or otherwise, for the manufacture, sale, or use of any method, apparatus, or prod-uct covered by l
5、etters patent. Neither should anything contained in the publication be con-strued as insuring anyone against liability for infringement of letters patent.Generally, API standards are reviewed and revised, reaffirmed, or withdrawn at least everyfive years. Sometimes a one-time extension of up to two
6、years will be added to this reviewcycle. This publication will no longer be in effect five years after its publication date as anoperative API standard or, where an extension has been granted, upon republication. Statusof the publication can be ascertained from the APIUpstream Segment telephone (202
7、) 682-8000. A catalog of API publications and materials is published annually and updated quar-terly by API, 1220 L Street, N.W., Washington, D.C. 20005.This document was produced under API standardization procedures that ensure appropri-ate notification and participation in the developmental proces
8、s and is designated as an APIstandard. Questions concerning the interpretation of the content of this standard or com-ments and questions concerning the procedures under which this standard was developedshould be directed in writing to the General Manager of the Upstream Segment, AmericanPetroleum I
9、nstitute, 1220 L Street, N.W., Washington, D.C. 20005. Requests for permissionto reproduce or translate all or any part of the material published herein should also beaddressed to the director.API standards are published to facilitate the broad availability of proven, sound engineer-ing and operatin
10、g practices. These standards are not intended to obviate the need for apply-ing sound engineering judgment regarding when and where these standards should beutilized. The formulation and publication of API standards is not intended in any way toinhibit anyone from using any other practices.Any manuf
11、acturer marking equipment or materials in conformance with the markingrequirements of an API standard is solely responsible for complying with all the applicablerequirements of that standard. API does not represent, warrant, or guarantee that such prod-ucts do in fact conform to the applicable API s
12、tandard.All rights reserved. No part of this work may be reproduced, stored in a retrieval system, or transmitted by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission from the publisher. Contact the Publisher, API Publishing Services, 1220 L S
13、treet, N.W., Washington, D.C. 20005.Copyright 1999 American Petroleum InstituteFOREWORDThis recommended practice is under the jurisdiction of the API Subcommittee on Fiber-glass and Plastic Tubulars.American Petroleum Institute(API) Recommended Practices are published to facilitate thebroad availabi
14、lity of proven, sound engineering and operating practices. These Recom-mended Practices are not intended to obviate the need for applying sound judgment as towhen and where these Recommended Practices should be utilized.The formation and publication of API Recommended Practices is not intended to, i
15、n anyway, inhibit anyone from using any other practices.API publications may be used by anyone desiring to do so. Every effort has been made bythe Institute to assure the accuracy and reliability of the data contained in them; however, theInstitute makes no representation, warranty, or guarantee in
16、connection with this publicationand hereby expressly disclaims any liability or responsibility for loss or damage resultingfrom its use or for the violation of any federal, state, or municipal regulation with which thispublication may conflict.Suggested revisions are invited and should be submitted
17、to the General Manager of theUpstream Segment, American Petroleum Institute, 1220 L Street, N.W., Washington, D.C.20005.iiiCONTENTSPage1 SCOPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 REFERENCES . . . . . . . . .
18、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 UNITS OF MEASURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 PACKAGING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19、. . . . . . . . . . . . . . . . . . . . . 15 TRANSPORTATION, HANDLING AND STORAGE . . . . . . . . . . . . . . . . . . . . . . . . 25.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25.2 Transportation. . . . . . . . . . .
20、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25.3 Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25.4 Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
21、 . . . . . . . . . . . . . . . . . . . . 26 FIBERGLASS TUBING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26.1 Preparation and Inspection Before Running . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26.2 Stabbing, Making Up and Lowerin
22、g . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36.3 Pulling Tubing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46.4 Completion Practices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
23、 . . . . . . . . 46.5 Fishing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56.6 Milling and Drilling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56.7 Causes of Fiberglass Tubin
24、g Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 LINE PIPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57.1 Ditch Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
25、 . . . . . . . . . . . . . . . . 57.2 Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57.3 Pressure Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67.4 Back Filling
26、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77.5 Surface Lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 REPAIR . . . . . . . . . . . . . . . . . . . . . . . . . . . .
27、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78.1 Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78.2 Line Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
28、. . . . . . . . . . . . . . 79 OPERATING CONDITIONS AND CONSIDERATIONS . . . . . . . . . . . . . . . . . . . . . 8APPENDIX A GUIDELINES FOR PREPARATION OF A WRITTENADHESIVE BONDING PROCEDURE . . . . . . . . . . . . . . . . . . . . . . . . . . 9APPENDIX B GUIDELINES FOR PREPARATION OF A WRITTEN PIPE
29、BONDER QUALIFICATION PROCEDURE . . . . . . . . . . . . . . . 11APPENDIX C SAMPLE JOINT INSPECTION CHECKLIST . . . . . . . . . . . . . . . . . . . 13APPENDIX D GUIDELINES FOR PREPARATION OF A WRITTEN REPAIR PROCEDURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15APPENDIX E TUBING MANUFACT
30、URERS INSPECTION TECHNIQUES AND CRITERIA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17APPENDIX F METRIC CONVERSION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Tables1 Pin End Thread Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
31、 . . . . . . . . . . . . . 7E-1 Recommended Visual Standards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18v1Recommended Practice for Care and Use of Fiberglass Tubulars1 ScopeThe purpose of this publication is to provide informationon the transporting, handling, ins
32、talling, and reconditioningof fiberglass tubulars in oilfield usage. Note: No provision of this Recommended Practice shall be cause forrejection of fiberglass tubulars provided the threads are in accor-dance with the requirements of the applicable product specification.Trouble-free service and maxim
33、um safety should result ifthis Recommended Practice is followed. Fiberglass tubularsdiffer in properties from metallic tubular goods and differentinstallation techniques are required.Note: These recommendations are applicable to normal situations.Exceptional conditions may warrant different practice
34、s. It is notintended that these practices conflict with any regulatory code.It is suggested that the selection of thread compound begiven careful consideration by the user bearing in mind that asatisfactory compound should possess certain properties, themajor of which are (1) to lubricate the thread
35、 surfaces to facil-itate joint make up and break out without galling and (2) toseal voids between mating thread surfaces and effectivelyprevent leakage. Thread compounds have a significant impacton the performance of tubulars, especially under combinedloading conditions. The manufacturers recommende
36、d threadcompound, which has been qualified in accord with the APIproduct specification, should be used.CAUTION: The material safety data sheets for thread com-pounds should be read and observed. Store and dispose ofcontainers and unused compound in accord with appropriateregulations. 2 References Th
37、is recommended practice includes, by reference, eitherin total, or part, the latest edition of other API, industry andgovernment standards as listed: API Spec 5BA Specification for Threading, Gaugingand Thread Inspection of Casing, Tubingand Line Pipe Threads RP 5B1 Gauging and Inspection of Casing,
38、 Tubingand Line Pipe Threads Spec 15LR A Specification for Low Pressure Fiber-glass Line Pipe Spec 15HR A Specification for High Pressure Fiber-glass Line Pipe ASTM1D1599 A Test Method for Short-Time, HydraulicFailure Pressure of Plastic Pipe, Tubingand Fittings D2105 A Test Method for Longitudinal
39、TensileProperties of Reinforced ThermosettingResin Pipe and TubeD2584 A Test Method for Ignition Loss of CuredReinforced ResinsD3839 A Standard Practice for UndergroundInstallation of Flexible Reinforced Ther-mosetting Resin Pipe and ReinforcedPlastic Mortar PipeAWWA2C-950 AWWA Standard for Fibergla
40、ss PressurePipe3 Units of MeasureA decimal/inch system is the standard for the dimensionsshown in this document. Nominal sizes will continue to beshown as fractions. For the purposes of this recommendedpractice, the fractions and their decimal equivalents are equaland interchangeable. Metric convers
41、ions are described inAppendix F. 4 PackagingFiberglass tubulars shall be packaged so that the body andconnections are protected during shipping, unloading, stor-ing, and handling. The manufacturer shall apply external andinternal protectors of such design, material and mechanicalstrength to protect
42、the threads, and/or ends, of the tubular andcoupling from damage under normal handling and transporta-tion. External protectors shall cover the full length of thethread, or bonding area, on the pin and the internal protectorsshall cover the equivalent total thread length of the internalthread, and/o
43、r bonding surface. Protectors shall exclude for-eign matter such as dirt from the threads and from the interiorof the tubular. The protectors shall contain no compoundscapable of damaging the threads or promoting adherence ofthe protectors to the threads or bonding surfaces. Refer to theappropriate
44、product specification. 1American Society for Testing and Materials, 100 Barr HarborDrive, West Conshohocken, Pennsylvania 19428-2959.2American Water Works Association, 6666 West Quincy Avenue,Denver, Colorado 80235. 2 API 15TL45 Transportation, Handling and Storage5.1 GENERALFiberglass tubulars in g
45、eneral, and threads in particular aremade with precision and require careful handling. Whethernew, used or reconditioned, they should always be handledwith protectors in place.5.2 TRANSPORTATION5.2.1Observation of the following practices will assurethat damage to the product does not occur. The foll
46、owing pre-cautions should be taken for truck transportation: a. Trucks that haul tubulars should be the flatbed type andnot pole trailers. Bed length of the trailer should be sufficientso that no overhang occurs. b. The use of stripping under the bottom layer and betweeneach layer is recommended to
47、prevent damage to the tubulars,as well as to keep them from shifting. For nominal 30 footlengths, a minimum of four (4) stripping material supports arerecommended. Stripping material should not be placed on thetransition or upset areas of the tubing. Stripping material onthe truck bed should be no m
48、ore than six (6) feet apart, ori-ented perpendicular to the tubular body and aligned vertically,of uniform thickness within each layer and free of protrudingnails. It should be a material softer than the tubular. Strippingmust be placed as near to the end of the tubular as possibleand still maintain
49、 vertical alignment. c. Load tubulars with all couplings (box ends) on the sameend of the truck.d. Care should be taken to prevent chafing of joint shoulderson adjacent joints.e. Suitable tie-downs, such as woven cloth straps, should beused to secure the load. Caution should be used to prevent dam-aging the tubulars when securing the load. The manufacturershall endeavor to locate the tie-downs such that bending of thetubulars is minimized.For shipments other than by truck, packaging, loading andprotection procedures shall be agreed upon between the pur-chaser and the manufacturer. 5.3 HA
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1