A-A-59267-1999 PHOSPHATE COATING COMPOUNDS MANGANESE OR ZINC BASE (FOR FERROUS METALS) [Superseded DLA MIL-P-50002 B CANC NOTICE 2 DLA MIL-P-50002 B VALID NOTICE 1 DLA MIL-P-50002 .pdf

1、 NOT MEASUREMENT SENSITIVEA-A-5926721 December 1999SUPERSEDINGMIL-P-50002B5 August 1981Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any otherdata which may improve this document should be sent to: Defense Supply Center Richmond(DSCR), ATTN: DSCR-VBD, 8000 Jeff

2、erson Davis Highway, Richmond, VA 23297-5610.AMSC N/A FSC 6850DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.COMMERCIAL ITEM DESCRIPTIONPHOSPHATE COATING COMPOUNDS, MANGANESE OR ZINC BASE(FOR FERROUS METALS)The General Services Administration has authorized the use

3、of thiscommercial item description as a replacement for MIL-P-50002B forall federal agencies.1. SCOPE. This commercial item description (CID) covers both manganese and zinc basephosphate coating compounds to be used in the preparation of bath for “heavy“ phosphate coatingof ferrous metal parts and a

4、ssemblies.2. CLASSIFICATION. Phosphate coating compounds shall be of the following types(see 7.5(b).Type M - Manganese base phosphateType Z - Zinc base phosphate3. SALIENT CHARACTERISTICS3.1 General. The phosphate coating compound shall be a uniform liquid, free of sediments andsuspended particles,

5、and shall be capable of producing uniform and insoluble coating that is grayto black in color.3.2 Composition. The phosphate coating compound shall consist of balanced aqueousphosphoric acid solutions of manganese and zinc phosphates, and nitrate accelerator. Whendetermined in accordance with the ma

6、nufacturers standard test methods, the compound shallconform to the chemical requirements specified in table I.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-592672Table I. Chemical requirements.ComponentType M% by weight, minimumType Z% by weig

7、ht, minimumManganese 6.2 -Zinc - 3.9Phosphate 25.0 30.0Nitrate 1.0 15.0Nickel 0.1 0.13.3 Phosphate coating weight. When determined in accordance with Ford Laboratory TestMethods (FLTM), the coating produced by the phosphate compound prior to any supplementarytreatment shall conform to the coating we

8、ight requirements specified in table II.Table II. Phosphate coating weight requirements.TypeMinimum coating weight(g/m2) Test MethodM 16 FLTM AQ 101-011, Method A2Z 11 FLTM AQ 101-0231 FLTM AQ 101-01, “Determination of Phosphate Coating Weights - Chromic Acid Method“.2 Substitute 5% stripping soluti

9、on to be used at approximately 165 F.3 FLTM AQ 101-02, “Determination of Phosphate Coating Weights Caustic Soda Method“.3.3.1 Coating weight conversions. When it is necessary to express the coating weight in mg/ft2,the following conversion calculations shall be used.mg/ft2 = (g/m2) (1000 mg/g) / (10

10、.764 ft2/m2)3.4 Corrosion resistance. The phosphate coating compound shall provide corrosion resistancesuch that bare phosphate coating (without any supplementary treatment) on parts, shall show nosigns of corrosion when subjected to a 5 % salt spray (fog) test as described in ASTM B117,“Standard Pr

11、actice for Operating Salt Spray (Fog) Apparatus“. The period of exposure to saltspray test shall be 1.5 hours for Type M products and 2.0 hours for Type Z products.3.5 Bath operation and controls. The bath concentration, operating temperatures, and immersiontime for parts shall be designated by the

12、manufacturer. Control of the chemical content of thephosphate coating solution in bath shall consist of determination of free acid, total acid, andferrous iron and shall be verified in conformance with the manufacturers instructions.3.6 Metal surface treatments. All metal preparation treatments and

13、supplementary coatingtreatments before and after phosphate coating process of ferrous and similar metals shall beverified with the manufacturer, and shall be applied with the discretion of the use.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-5

14、926734. REGULATORY REQUIREMENTS4.1 Material safety data sheet (MSDS). Manufacturers shall prepare and submit a MSDS inaccordance with FED-STD-313, “Material Safety Data, Transportation Data and Disposal Datafor Hazardous Materials Furnished to Government Activities“ and meeting the Code of FederalRe

15、gulations (CFR) requirements of 29 CFR 1910.1200, “Hazard Communication“.4.2 Recovered materials. The offeror/contractor is encouraged to use recovered materials to themaximum extent practicable, in accordance with paragraph 23.403 of the Federal AcquisitionRegulation (FAR).5. QUALITY ASSURANCE PROV

16、ISIONS5.1 Product conformance. The products provided shall meet the salient characteristics of thiscommercial item description; conform to the producers own drawings, specifications, standards,and quality assurance practices; and be the same product as that which the supplier offers for saleon the c

17、ommercial market. The government reserves the right to require proof of suchconformance.5.2 Market acceptability. The product offered must have been previously sold either to thegovernment or on the commercial market.6. PACKAGING6.1 Preservation, packing, and marking. For acquisition purposes, the p

18、roducts shall bepreserved, packed, and marked as specified in the acquisition order (see 7.5(c).7. NOTES7.1 Intended use. Phosphate coating compounds conforming to this CID are intended for use inproducing respective phosphate coatings conforming to the requirements of DOD-P-16232,“Phosphate Coating

19、, Heavy, Manganese or Zinc Base (For Ferrous Metals)“.7.2 Sources of documents.7.2.1 ASTM standards. Copies of ASTM Standards may be obtained from American Society forTesting and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428.7.2.2 FLTM standards. Copies of Ford Laboratory Test Method

20、s may be obtained fromFord Standards Desk, Budco Teleservicing, 660 Woodward #1800, Detroit, MI 48226,Phone: (313) 225-5100.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-5926747.2.3. Government documents. Printed CFR, FAR, military specificatio

21、ns and federal standardsmay be obtained from the U.S. Government Printing Office, Superintendent of Documents, MailStop: SSOP, Washington, DC 20402-9328. Electronic copies of CFR documents may beobtained from http:/www.access.gpo.gov. Electronic copies of military specifications and federalstandards

22、 may be obtained from http:/astimage.daps.dla.mil/quicksearch/.7.3 Part identification number (PIN). The following part identification numbering system forCID A-A-59267 is for government purposes and does not constitute a requirement for thecontractor.7.4 National stock number (NSN). The NSNs listed

23、 below are assigned for the listed producttypes (see 2.). Other NSNs may also correspond with this document.Type Assigned NSNZ 6810-00-543-7050M 6850-00-680-19987.5 Ordering data. Acquisition documents must specify the following information:a. Title, number, and date of this documentb. Product class

24、ification, type (see 2.)c. Packaging requirements (see 6.1)MILITARY INTERESTS:CIVIL AGENCYCOORDINATING ACTIVITY:Custodians:Air Force - 11Army - MRNavy - SHGSA - 7FXEReviewers:Air Force - 68Army - AL, EANavy - ASPreparing activity:DLA - GS(Project 6850-1197)Classification (M or Z)AA59267 XCID numberProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-