ABS 113 CORR-2014 GUIDANCE NOTES ON STRUCTURAL DIRECT ANALYSIS FOR HIGH-SPEED CRAFT.pdf

1、 ABSGUIDANCE NOTES ON STRUCTURAL DIRECT ANALYSIS FOR HIGH-SPEED CRAFT .2011 1 GUIDANCE NOTES ON STRUCTURAL DIRECT ANALYSIS FOR HIGH-SPEED CRAFT APRIL 2011 CORRIGENDA/EDITORIALS 1 February 2014 Page No. Paragraph Comments Foreword Iii - In third paragraph, reference “Section 1/1.3 of ABS Guide for Bu

2、ilding and Classing High-Speed Craft (HSC Guide)” to read “Sections 1-1-3 and 1-2-2 of the ABS Rules for Conditions of Classification High-Speed Craft (Part 1)”. Iii - In third paragraph, reference “Section 1/1.5.2 of the HSC Guide” to read “Section 3-1-3 of the ABS Rules for Building and Classing H

3、igh-Speed Craft (HSC Rules)”. Iii - In fourth paragraph, reference “Section 1-1-3 of the ABS Guide for Building and Classing High-Speed Naval Craft (HSNC Guide)” to read “Sections 1-1-3 and 1-3-2 of the ABS Rules for Conditions of Classification High-Speed Craft (Part 1)”. Iii - In fourth paragraph,

4、 reference “Section 3-1-3 of the HSNC Guide” to read “Section 3-1-3 of the ABS Rules for Building and Classing High-Speed Naval Craft (HSNC Rules)”. iii - In last paragraph, “concerning this Guide” to read “concerning these Guidance Notes”. Section 1 Introduction 1 1/1.3 Reference “ABS Guide for Bui

5、lding and Classing High-Speed Craft (HSC Guide)” to read “ABS Rules for Building and Classing High-Speed Craft (HSC Rules)”. 1 1/1.3 Reference “ABS Guide for Building and Classing High-Speed Naval Craft (HSNC Guide)” to read “ABS Rules for Building and Classing High-Speed Naval Craft (HSNC Rules)”.

6、2 1/1.5 Reference “HSNC Guide” to read “HSNC Rules”. (2 places) 2 1/3 Reference “HSNC Guide” to read “HSNC Rules”. (2 places) 2 1/5.1 In last paragraph, reference “Sec. 15.7” to read “Subsection 14/7”. 3 1/7 Reference “Section 1/1.5.2a of the HSC Guide or Section 1-1-4/3 of the HSNC Guide” to read “

7、1-1-4/5.1 of the ABS Rules for Conditions of Classification High-Speed Craft (Part 1)”. Section 2 Loading Conditions and Load Cases 9 2/5 Reference “3-2-2/1.1 of the HSNC Guide” to read “3-2-2/1.1 of the HSNC Rules”. 9 2/5 Reference “3-1-1-/23 of the HSNC Guide” to read “3-1-1/23 of the HSNC Rules”.

8、 2 2/9 Reference “HSNC Guide” to read “HSNC Rules”. Corrigenda/Editorials 1 February 2014 2 ABSGUIDANCE NOTES ON THE APPLICATION OF FIBER ROPE FOR OFFSHORE MOORING .2011 Section 6 Nonlinear Seakeeping Analysis 15 6/1 Reference “HSNC Guide” to read “HSNC Rules”. Section 13 Acceptance Criteria 29 13/1 Reference “Table 2/E.1 of the HSC Guide or 2-5-A1/Table 2 of the HSNC Guide ABS Rules for Materials and Welding (Part 2) Aluminum and Fiber Reinforced Plastics (FRP)” to read “2-5-A1/Table 2 of the ABS Rules for Materials and Welding (Part 2) Aluminum and Fiber Reinforced Plastics (FRP)”.