1、 RULES FOR BUILDING AND CLASSING STEEL VESSELS UNDER 90 METERS (295 FEET) IN LENGTH 2006 Guide to Color Coding Used in Online Version of the Rules The following summarizes the colors corresponding to Rule Changes, Corrigenda items and editorial changes in the Rules files which are available for down
2、load. Rule Changes: Changes effective 1 January 2006 NOTICE NO. 1 July 2006 (effective 1 July 2006 and 1 August 2007) NOTICE NO. 2 November 2006 (effective 1 January 2007) NOTICE NO. 3 February 2007 (1 February 2007) NOTICE NO. 4 July 2007 (effective 1 July 2007) NOTICE NO. 5 August 2007 (effective
3、21 June 2007) NOTICE NO. 6 November 2007 (effective 1 October 2007) NOTICE NO. 7 December 2007 (effective 29 November 2007) NOTICE NO. 8 January 2008 (effective 1 January 2008) NOTICE NO. 9 July 2008 (effective 1 July 2008) NOTICE NO. 10 October 2008 (effective 1 January 2009) Corrigenda: CORRIGENDA
4、/EDITORIALS 24 February 2006 CORRIGENDA/EDITORIALS 1 June 2006 CORRIGENDA/EDITORIALS 1 November 2006 CORRIGENDA/EDITORIALS 29 January 2007 CORRIGENDA/EDITORIALS 12 April 2007 CORRIGENDA/EDITORIALS 1 July 2007 CORRIGENDA/EDITORIALS 30 January 2008 CORRIGENDA/EDITORIALS 31 March 2008 CORRIGENDA/EDITOR
5、IALS 1 July 2008 CORRIGENDA/EDITORIALS 1 October 2008 Editorials: Editorial Changes Notices and General Information RULES FOR BUILDING AND CLASSING STEEL VESSELS UNDER 90 METERS (295 FEET) IN LENGTH 2006 NOTICES AND GENERAL INFORMATION American Bureau of Shipping Incorporated by Act of Legislature o
6、f the State of New York 1862 Copyright 2005 American Bureau of Shipping ABS Plaza 16855 Northchase Drive Houston, TX 77060 USA This Page Intentionally Left Blank ABSRULES FOR BUILDING AND CLASSING STEEL VESSELS UNDER 90 METERS (295 FEET) IN LENGTH .2006 iii Table of Contents N&GI Notices and General
7、 Information CONTENTS Introduction1 TABLE 1 Applicable Editions of Booklets Comprising 2006 Rules .2 TABLE 2 Division and Numbering of Rules.2 Rule Change Notice No. 9 (2006)3 TABLE 3 Summary of Changes for the 2006 Rules 3 This Page Intentionally Left Blank ABSRULES FOR BUILDING AND CLASSING STEEL
8、VESSELS UNDER 90 METERS (295 FEET) IN LENGTH .2006 1 Notices and General Information Introduction 1. The year 2006 edition of the Rules for Building and Classing Steel Vessels Under 90 meters (295 feet) in Length is a complete reprint of the 2001 edition, consisting of the eight (8) booklets as show
9、n in Table 1. With regard to three booklets, Part 1, Part 2, and Part 7: a) The purpose of the generic title ABS Rules for Conditions of Classification (Part 1) is to reflect the expanded contents of PART 1, as a result of including consolidated requirements for “Classification” applicable to all ty
10、pes of and sizes of vessels, barges and specific shipboard arrangements/systems, etc., except for those in offshore service, as specified in the Foreword to Part 1. Additional specific requirements are contained in Part 1 of these Rules for Building and Classing Steel Vessels Under 90 meters (295 fe
11、et) in Length b) The purpose of the generic title ABS Rules for Materials and Welding of PART 2 is to emphasize the common applicability of the requirements to ABS-classed vessels, other marine structures and their associated machinery, and thereby make PART 2 more readily a common “PART” of various
12、 ABS Rules and Guides, as appropriate. c) The purpose of the generic title ABS Rules for Survey After Construction (Part 7) is to reflect the expanded contents of PART 7, as a result of including consolidated requirements for “Surveys After Construction” applicable to all types and sizes of vessels,
13、 barges and specific shipboard arrangements/systems, etc., as specified in Part 7, Chapter 1, Section 1. 2. The numbering system applied in the Rules is shown in Table 2. 3. Rule Change Notice No. 9, as per Table 3, with an effective date of 1 January 2006, has been incorporated into the 2006 Rules
14、for Building and Classing Steel Vessels Under 90 meters (295 feet) in Length. In addition, the Rule Changes contained in the previously published Notices 1 through 8 to the 2001 Rules for Building and Classing Steel Vessels Under 90 meters (295 feet) in Length (together with Corrigenda items) have a
15、lso been incorporated into the text of the 2006 Rules for Building and Classing Steel Vessels Under 90 meters (295 feet) in Length. 4. The effective date of each technical change since 1993 is shown in parenthesis at the end of the subsection/paragraph titles within the text of each Part. Unless a p
16、articular date and month are shown, the years in parentheses refer to the following effective dates: (2000) and after 1 January 2000 (and subsequent years) (1996) 9 May 1996 (1999) 12 May 1999 (1995) 15 May 1995 (1998) 13 May 1998 (1994) 9 May 1994 (1997) 19 May 1997 (1993) 11 May 1993 5. Until the
17、next edition of the Rules for Building and Classing Steel Vessels Under 90 meters (295 feet) in Length is published, Rule Change Notices and/or Corrigenda, as necessary, will be published on the ABS website www. eagle.org only, and will be available free for downloading. It is not intended to publis
18、h hard copies of future Rule Change Notices and/or Corrigenda to existing Rules or Guides. The consolidated edition of the Rules for Building and Classing Steel Vessels Under 90 meters (295 feet) in Length, which includes Rule Change Notices and/or Corrigenda using different colors for easy recognit
19、ion will be published on the ABS website only when RCN and/or Corrigenda are issued. 6. The listing of CLASSIFICATION SYMBOLS AND NOTATIONS is available from the ABS website www.eagle.org/rules/downloads.html for download. Notices and General Information 2 ABSRULES FOR BUILDING AND CLASSING STEEL VE
20、SSELS UNDER 90 METERS (295 FEET) IN LENGTH .2006 TABLE 1 Applicable Editions of Booklets Comprising 2006 Rules Notices and General Information 2006 Part 1: Rules for Conditions of Classification* 2008 Part 1: Conditions of Classification (Supplement to the ABS Rules for Conditions of Classification)
21、* 2006 Part 2: Rules for Materials and Welding Rules for Testing and Certification of Materials Rules for Welding and Fabrication 2006 Part 3: Hull Construction and Equipment 2006 Part 4: Vessel Systems and Machinery 2006 Part 5: Specialized Vessels and Services Chapter 8 Vessels Intended for Towing
22、 Chapter 9 Fire Fighting Vessels Chapter 10 Vessels Intended for Support Services to Offshore Installations Chapter 11 Oil Recovery Vessels Chapter 12 Safety Standby Service Vessels Chapter 13 Escort Vessels Chapter 14 Fishing Vessels 2006 Part 7: Rules for Surveys After Construction 2006 Note: The
23、requirements for conditions of classification are contained in the separate, generic ABS Rules for Conditions of Classification (Part 1). Additional specific requirements are contained in Part 1 of these Rules. TABLE 2 Division and Numbering of Rules Division Number Part Part 1 Chapter Part 1, Chapt
24、er 1 Section Section 1-1-1 Subsection (see Note 1) 1-1-1/1 Paragraph (see Note 1) 1-1-1/1.1 Subparagraph 1-1-1/1.1.1 Item 1-1-1/1.1.1(a) Subitem 1-1-1/1.1.1(a)i) Appendix Appendix 1-1-A1 or Appendix 1-A1-1 Note: 1 An odd number (1, 3, 5, etc.) numbering system is used for the Rules. The purpose is t
25、o permit future insertions of even-numbered paragraphs (2, 4, 6, etc.) of text and to avoid the necessity of having to renumber the existing text and associated cross-references, as applicable, within the Rules and associated process instructions, check sheets, etc. Notices and General Information A
26、BSRULES FOR BUILDING AND CLASSING STEEL VESSELS UNDER 90 METERS (295 FEET) IN LENGTH .2006 3 Rule Change Notice No. 9 (2006) TABLE 3 Summary of Changes for the 2006 Rules EFFECTIVE DATE 1 January 2006 shown as (2006) (based on the contract date for new construction between builder and Owner) Part/Pa
27、ra. No. Title/Subject Status/Remarks PART 3 Hull Construction and Equipment 3-2-7/1.1 Openings and Penetrations To specify the requirements for ventilation penetrations through watertight bulkheads 3-5-1/13.3.1 Operating Loads For consistency with 4-5-1/5.1.1(a) of the Rules for Building and Classin
28、g Steel Vessels for windlass design with the cable stopper attached to the windlass structure. 3-7-1/Table 1 Testing Requirements for Tanks and Boundaries To align the requirements with IACS UR S14 (Rev. 2) and to clarify that “top of hatch” means “top of hatch coaming” for the purpose of measuring
29、hydrostatic testing head. PART 4 Vessel Systems and Machinery 4-2-1/13.1 Starting Air Systems To align the requirements with the Rules for Building and Classing Steel Vessels. 4-2-1/13.3.2 Diesel-electric Propulsion To redefine the parameter “G” of the equation for “S”, total number of consecutive s
30、tarts. 4-3-1/19.1 Fitted Bolts To clarify that the shaft diameter D is to be the as-built diameter. 4-3-3/11.9.8 Hydraulic Lock To provide requirements for the use of an independent steering failure alarm for follow-up control systems in lieu of a hydraulic lock alarm. 4-4-1/9.17.3 (New) Tanks To al
31、ign the requirements for installation of level gauges throughout the ABS Rules. 4-4-1/9.19 (New) Flexible Hoses To align the requirements with the Rules for Building and Classing Steel Vessels and industry practice. 4-4-2/19.1 Installation To clarify that use of threaded connections outboard of the
32、shell valve is not acceptable. 4-4-2/21.1 Valves Required To require that materials readily rendered ineffective by heat are not to be used for the connection at the shell. 4-4-2/25.5 Non-integral Keel Cooler Installations To align the requirements with the Rules for Building and Classing Steel Vess
33、els and industry practice. 4-4-3/13.5 Gauge Glasses To align the requirements for installation of level gauges throughout the ABS Rules. 4-4-8/1.5.1(c) Design Pressure To better align the required design pressure with available industrial equipment. 4-4-8/1.7 Testing To better align the required des
34、ign pressure with available industrial equipment. 4-4-8/13 Liquid Mud Cargo Tanks To specify requirements for liquid mud cargo tanks. 4-6-5/7.1 General To clarify that electrical plants of less than 75 kW are not required to have a split bus arrangement. Notices and General Information 4 ABSRULES FO
35、R BUILDING AND CLASSING STEEL VESSELS UNDER 90 METERS (295 FEET) IN LENGTH .2006 Part/Para. No. Title/Subject Status/Remarks 4-6-2/5.17 (New) Alarms and Safeguards for Emergency Diesel Engines To incorporate the requirements of IACS UR M63. 4-6-2/Table 1 (New) Alarms and Safeguards for Emergency Die
36、sel Engines To incorporate the requirements of IACS UR M63. 4-6-2/7.1.4 Motor Control Center To clarify the requirements for permitting feeder cables to motor control centers with a current carrying capacity of less than 100% of the sum of the rated currents of all the connected motors. 4-6-2/7.9 (N
37、ew) Harmonics To incorporate requirements for harmonics, in line with IEEE 519 and 2.8.2.2 of IEC 60092-101. 4-6-2/9.5.2(b) Reverse Power Protection To establish acceptance criteria in the case where setting the reverse power protection device in the range of 8% to 15% would be detrimental to the en
38、gine 4-6-2/9.15.2 Parallel Operation To require the automatic opening of the disconnecting device for secondary side of the transformer when the primary side disconnecting device opens due to any reason. 4-6-2/13.1.3(a) Machinery Spaces and Accommodation Spaces To clarify that the requirement applie
39、s to Category A machinery spaces and that stairways leading to boat decks include stair towers and escape trunks. 4-6-2/15.9.4 (New) Public Address System To clarify the requirements where a single system serves for both public address and general emergency alarm. 4-6-2/17.3 Engineers Alarm To clari
40、fy the location at which the Engineers alarm is to be audible and to specify the sound pressure level within the cabin. 4-6-3/3.1.1 Equipment Location To incorporate the requirements of IACS UR E20. 4-6-3/Figure 1 (New) An Example of Protected Area, Adjacent Area of Direct Spray and Adjacent Area Wh
41、ere Water May Extend To incorporate the requirements of IACS UR E20. 4-6-3/Table 1 Minimum Degree of Protection To incorporate the requirements of IACS UR E20. 4-6-3/5.1.7 (New) Paint on Cables To clarify the requirements where it is specifically intended to paint or apply any other coating on elect
42、ric cables. 4-6-3/5.1.8 (New) Cable Installation above High Voltage Switchgear and Control-gear To require that cables are not to be installed near and above a pressure relief flap for high voltage switchgear and control-gear. 4-6-3/11.1.1 General To clarify that fans for ventilation in any hazardou
43、s area are required to be non-sparking. 4-6-3/11.1.3 Cables Installation To clarify that non-armored cables can be permitted for intrinsically safe circuits where such cables are protected from mechanical damage. 4-6-4/3.13.2 Shafts and Couplings To address requirements for propulsion systems with d
44、irectly coupled diesel engine-propeller, where shaft generators and shaft motors are an integral part of the propulsion shafting. Notices and General Information ABSRULES FOR BUILDING AND CLASSING STEEL VESSELS UNDER 90 METERS (295 FEET) IN LENGTH .2006 5 Part/Para. No. Title/Subject Status/Remarks
45、4-6-4/13.1.3 Fire Resistant Property To incorporate the requirements of IACS UR E15.1 (Rev. 1). 4-7-4/31.1 General To clarify the required locations for the alarm monitoring stations. 4-7-4/Table 4B Instrumentation and Safety System Functions in Centralized Control Station Medium and High Speed (Tru
46、nk Piston) Diesel Engines To clarify that bearing temperature detection in lieu of oil mist detection is acceptable. To add the provision of accepting an equivalent device to oil mist detection. 4-7-4/Table 6B Instrumentation and Safety System Functions in Centralized Control Station Generator Prime
47、 Mover for Electric Propulsion To clarify that bearing temperature detection in lieu of oil mist detection is acceptable. To add the provision of accepting an equivalent device to oil mist detection. PART 5 Specialized Vessels and Services 5-8-A2/3.27 To reflect ABS survey practice for new construction This Page Intentionally Left Blank
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1