ABS 5-2016 RULES FOR BUILDING AND CLASSING STEEL VESSELS UNDER 90 METERS (295 FEET) IN LENGTH 2016.pdf

1、 RULES FOR BUILDING AND CLASSING STEEL VESSELS UNDER 90 METERS (295 FEET) IN LENGTH 2016 Guide to Color Coding Used in Online Version of the Rules The following summarizes the colors corresponding to Rule Changes, Corrigenda items and editorial changes in the Rules files which are available for down

2、load. Rule Changes: Changes effective 1 January 2016 Corrigenda: CORRIGENDA/EDITORIALS 22 February 2016 Editorials: Editorial Changes Notices and General Information RULES FOR BUILDING AND CLASSING STEEL VESSELS UNDER 90 METERS (295 FEET) IN LENGTH 2016 NOTICES AND GENERAL INFORMATION American Burea

3、u of Shipping Incorporated by Act of Legislature of the State of New York 1862 Copyright 2015 American Bureau of Shipping ABS Plaza 16855 Northchase Drive Houston, TX 77060 USA Table of Contents N&GI Notices and General Information CONTENTS Introduction . 1 TABLE 1 Applicable Editions of Booklets Co

4、mprising 2016 Rules 2 TABLE 2 Division and Numbering of Rules 3 Rule Change Notice (2016) . 3 TABLE 3 Summary of Changes from the 2015 Rules 3 ii ABSRULES FOR BUILDING AND CLASSING STEEL VESSELS UNDER 90 METERS (295 FEET) IN LENGTH .2016 Notices and General Information Introduction 1. The year 2016

5、edition of the Rules for Building and Classing Steel Vessels Under 90 meters (295 feet) in Length consists of the eight (8) booklets as shown in Table 1. With regard to three booklets, Part 1, Part 2, and Part 7: a) The purpose of the generic title ABS Rules for Conditions of Classification (Part 1)

6、 is to reflect the expanded contents of PART 1, as a result of including consolidated requirements for “Classification” applicable to all types of and sizes of vessels, barges and specific shipboard arrangements/systems, etc., except for those in offshore service, as specified in the Foreword to Par

7、t 1. Additional specific requirements are contained in Part 1 of these Rules for Building and Classing Steel Vessels Under 90 meters (295 feet) in Length b) The purpose of the generic title ABS Rules for Materials and Welding of PART 2 is to emphasize the common applicability of the requirements to

8、ABS-classed vessels, other marine structures and their associated machinery, and thereby make PART 2 more readily a common “PART” of various ABS Rules and Guides, as appropriate. c) The purpose of the generic title ABS Rules for Survey After Construction (Part 7) is to reflect the expanded contents

9、of PART 7, as a result of including consolidated requirements for “Surveys After Construction” applicable to all types and sizes of vessels, barges and specific shipboard arrangements/systems, etc., as specified in Part 7, Chapter 1, Section 1. 2. The numbering system applied in the Rules is shown i

10、n Table 2. 3. The primary changes from the 2015 edition of the Rules are identified and listed in Table 3. The effective date of the indicated Rule Changes is 1 January 2016, unless specifically indicated otherwise. 4. The effective date of each technical change since 1993 is shown in parenthesis at

11、 the end of the subsection/paragraph titles within the text of each Part. Unless a particular date and month are shown, the years in parentheses refer to the following effective dates: (2000) and after 1 January 2000 (and subsequent years) (1996) 9 May 1996 (1999) 12 May 1999 (1995) 15 May 1995 (199

12、8) 13 May 1998 (1994) 9 May 1994 (1997) 19 May 1997 (1993) 11 May 1993 5. Until the next edition of the Rules for Building and Classing Steel Vessels Under 90 meters (295 feet) in Length is published, Rule Change Notices and/or Corrigenda, as necessary, will be published on the ABS website www.eagle

13、.org only, and will be available free for downloading. It is not intended to publish hard copies of future Rule Change Notices and/or Corrigenda to existing Rules or Guides. The consolidated edition of the Rules for Building and Classing Steel Vessels Under 90 meters (295 feet) in Length, which incl

14、udes Rule Change Notices and/or Corrigenda using different colors for easy recognition will be published on the ABS website only when RCN and/or Corrigenda are issued. 6. The listing of CLASSIFICATION SYMBOLS AND NOTATIONS is available from the ABS website www.eagle.org for download. ABSRULES FOR BU

15、ILDING AND CLASSING STEEL VESSELS UNDER 90 METERS (295 FEET) IN LENGTH .2016 1 Notices and General Information TABLE 1 Applicable Editions of Booklets Comprising 2016 Rules Notices and General Information 2016 Part 1: Rules for Conditions of Classification (1)2016 (2)Part 1: Conditions of Classifica

16、tion (Supplement to the ABS Rules for Conditions of Classification) (1)2016 Part 2: Rules for Materials and Welding Rules for Testing and Certification of Materials Rules for Welding and Fabrication 2016 (2)Part 3: Hull Construction and Equipment 2016 Part 4: Vessel Systems and Machinery 2016 Part 5

17、: Specialized Vessels and Services Chapter 1 Vessels Intended for Navigation in Ice Chapter 2 Vessels Intended to Carry Oil in Bulk Chapter 3 Vessels Intended to Carry Ore or Bulk Cargoes Chapter 4 Vessels Intended to Carry Liquefied Gases and Chemical Cargoes Chapter 5 Vessels Intended to Carry Pas

18、sengers Chapter 6 Vessels Intended to Carry Containers Chapter 7 Vessels Intended to Carry Vehicles Chapter 8 Fire Fighting Vessels Chapter 9 Oil Recovery Vessels Chapter 10 Escort Vessels Chapter 11 Vessels Intended for Towing Chapter 12 Fishing Vessels 2016 Part 7: Rules for Surveys After Construc

19、tion 2016 (2)Notes: 1 The requirements for conditions of classification are contained in the separate, generic ABS Rules for Conditions of Classification (Part 1). Additional specific requirements are contained in Part 1 of these Rules. 2 The latest edition of these Rules is to be referred to. These

20、 Rules may be downloaded from the ABS website at www.eagle.org, Rules and Guides, Downloads or may be ordered separately from the ABS Publications online catalog at www.eagle.org, Rules and Guides, Catalog. 2 ABSRULES FOR BUILDING AND CLASSING STEEL VESSELS UNDER 90 METERS (295 FEET) IN LENGTH .2016

21、 Notices and General Information TABLE 2 Division and Numbering of Rules Division Number Part Part 1 Chapter Part 1, Chapter 1 Section Section 1-1-1 Subsection (see Note 1) 1-1-1/1 Paragraph (see Note 1) 1-1-1/1.1 Subparagraph 1-1-1/1.1.1 Item 1-1-1/1.1.1(a) Subitem 1-1-1/1.1.1(a)i) Appendix Appendi

22、x 1-1-A1 or Appendix 1-A1-1 Note: 1 An odd number (1, 3, 5, etc.) numbering system is used for the Rules. The purpose is to permit future insertions of even-numbered paragraphs (2, 4, 6, etc.) of text and to avoid the necessity of having to renumber the existing text and associated cross-references,

23、 as applicable, within the Rules and associated process instructions, check sheets, etc. Rule Change Notice (2016) TABLE 3 Summary of Changes from the 2015 Rules EFFECTIVE DATE 1 February 2015 shown as (1 February 2015) (based on the contract date for new construction between builder and Owner) Part

24、/Para. No. Title/Subject Status/Remarks PART 4 Vessel Systems and Machinery 4-4-2/5.8 Other Materials To align the requirements with IACS UR F2. (Incorporates Notice No. 1) EFFECTIVE DATE 1 July 2015 shown as (1 July 2015) (based on the contract date for new construction between builder and Owner) P

25、art/Para. No. Title/Subject Status/Remarks PART 1 Conditions of Classification (Supplement to the ABS Rules for Conditions of Classification) 1-1-2 Classification Symbols and Notations To provide a reference to new content in Part 5. (Incorporates Notice No. 2) PART 3 Hull Construction and Equipment

26、 3-1-2/Table 2 Material Class or Grade of Structural Members To require the materials for other steering equipment components described in Section 3-2-11 to be of steel in accordance with the requirements of Part 2, Chapter 1. (Incorporates Notice No. 2) 3-2-10/21 (New) Energy Saving Devices (ESD) (

27、Hull Appendages) To clearly identify design and survey requirements for energy saving devices (ESD) so that the hull welding, material compatibility and hull structural continuity evaluation during design and survey of these appendages must be assessed to identify any high stress concentrations toge

28、ther with erosion/corrosion spots. (Incorporates Notice No. 2) 3-2-11/1.1 Application To clearly indicate steering equipment other than rudders in the Application section. (Incorporates Notice No. 2) 3-2-11/1.3 Materials for Rudder, Rudder Stock and Steering Equipment To specify that rudders and oth

29、er steering equipment are to comply with 3-1-2/Table 2. (Incorporates Notice No. 2) ABSRULES FOR BUILDING AND CLASSING STEEL VESSELS UNDER 90 METERS (295 FEET) IN LENGTH .2016 3 Notices and General Information Part/Para. No. Title/Subject Status/Remarks 3-2-16/1.1.4 (New) To add requirement for IMO

30、PSPC (Section 3.3.2) and/or IMO PSPC-COT Regulations compliance. (Incorporates Notice No. 2) 3-5-1/19.3 Deck Fittings To reflect that ISO 3913 is now withdrawn and replaced by ISO 13795. (Incorporates Notice No. 2) PART 4 Vessel Systems and Machinery 4-5-2/9.1 Fixed Local Application Fire-fighting S

31、ystems To delete the reference to the vessels main propulsion and power generation, in line with IMO MSC.338(91). (Incorporates Notice No. 2) PART 5 Specialized Vessels and Services 5/Foreword Foreword To clarify the requirements and notations for vessels without specific requirements within the Und

32、er 90m Rules. (Incorporates Notice No. 2) 5-1 (New) Vessels Intended for Navigation in Ice To clarify the requirements and notations for vessels without specific requirements within the Under 90m Rules. (Incorporates Notice No. 2) 5-2 (New) Vessels Intended to Carry Oil in Bulk To clarify the requir

33、ements and notations for vessels without specific requirements within the Under 90m Rules. (Incorporates Notice No. 2) 5-3 (New) Vessels Intended to Carry Ore or Bulk Cargoes To clarify the requirements and notations for vessels without specific requirements within the Under 90m Rules. (Incorporates

34、 Notice No. 2) 5-4 (New) Vessels Intended to Carry Liquefied Gases and Chemical Cargoes To clarify the requirements and notations for vessels without specific requirements within the Under 90m Rules. (Incorporates Notice No. 2) 5-5 (New) Vessels Intended to Carry Passengers To clarify the requiremen

35、ts and notations for vessels without specific requirements within the Under 90m Rules. (Incorporates Notice No. 2) 5-6 (New) Vessels Intended to Carry Containers To clarify the requirements and notations for vessels without specific requirements within the Under 90m Rules. (Incorporates Notice No. 2

36、) 5-7 (New) Vessels Intended to Carry Vehicles To clarify the requirements and notations for vessels without specific requirements within the Under 90m Rules. (Incorporates Notice No. 2) 5-8 (New) Fire Fighting Vessels To clarify the requirements and notations for vessels without specific requiremen

37、ts within the Under 90m Rules. (Incorporates Notice No. 2) 5-9 (New) Oil Recovery Vessels To clarify the requirements and notations for vessels without specific requirements within the Under 90m Rules. (Incorporates Notice No. 2) 5-10 (New) Escort Vessels To clarify the requirements and notations fo

38、r vessels without specific requirements within the Under 90m Rules. (Incorporates Notice No. 2) EFFECTIVE DATE 1 January 2016 shown as (2016) (based on the contract date for new construction between builder and Owner) Part/Para. No. Title/Subject Status/Remarks PART 1 Conditions of Classification (S

39、upplement to the ABS Rules for Conditions of Classification) 1-1-3/1.1 General To clarify the requirements and notations for vessels without specific requirements within the Under 90m Rules. PART 3 Hull Construction and Equipment 3-2-2/17 (New) Bilge Plating To give consideration for increased stren

40、gth in bilge plate due to its curved shape. 3-2-4/1.7 Floors To align the requirements with the Steel Vessel Rules and the OSV Rules. 3-2-7/5.3 Stiffeners To provide requirements for higher-strength materials. 3-2-7/5.7.3 End Connections To avoid corrugated bulkheads landing on inner bottom plates a

41、nd creating stress concentration spots on primary hull structures. 3-2-9/3.7 End Attachments To align the requirements with IACS UR S3.1, IACS UR S3.3 and service experience. 3-2-11/7.3 Lower Rudder Stocks To remove “K” since material factor (K) is already included in the maximum allowable stress fo

42、rmula. 4 ABSRULES FOR BUILDING AND CLASSING STEEL VESSELS UNDER 90 METERS (295 FEET) IN LENGTH .2016 Notices and General Information Part/Para. No. Title/Subject Status/Remarks 3-2-12/7.5 Coaming Stiffeners To clarify the size of hatches that need not comply with the requirement of coaming stiffenin

43、g. 3-5-1/19.1 General To clarify that for vessels which are not required to comply with SOLAS, the subject requirement is not mandatory. 3-7-1/1 General To reflect the comments from Administrations and Industry Organizations considered during review of the proposed Testing Guidelines associated with

44、 SOLAS Chapter II-1, Regulation 11, made during the IMO MSC and SDC meetings. 3-7-1/1.3.2 To reflect the comments from Administrations and Industry Organizations considered during review of the proposed Testing Guidelines associated with SOLAS Chapter II-1, Regulation 11, made during the IMO MSC and

45、 SDC meetings. 3-7-1/3.3 Structural Testing To reflect the comments from Administrations and Industry Organizations considered during review of the proposed Testing Guidelines associated with SOLAS Chapter II-1, Regulation 11, made during the IMO MSC and SDC meetings. 3-7-1/5 Testing Methods To refl

46、ect the comments from Administrations and Industry Organizations considered during review of the proposed Testing Guidelines associated with SOLAS Chapter II-1, Regulation 11, made during the IMO MSC and SDC meetings. 3-7-1/7.1.1 Leak Testing To reflect the comments from Administrations and Industry

47、 Organizations considered during review of the proposed Testing Guidelines associated with SOLAS Chapter II-1, Regulation 11, made during the IMO MSC and SDC meetings. 3-7-1/7.7 (New) Hydrostatic or Hydropneumatic Tightness Testing To reflect the comments from Administrations and Industry Organizati

48、ons considered during review of the proposed Testing Guidelines associated with SOLAS Chapter II-1, Regulation 11, made during the IMO MSC and SDC meetings. 3-7-1/9 (New) Alternative Procedure for Strength Testing To reflect the comments from Administrations and Industry Organizations considered dur

49、ing review of the proposed Testing Guidelines associated with SOLAS Chapter II-1, Regulation 11, made during the IMO MSC and SDC meetings. 3-7-1/Table 1 Testing Requirements for Tanks and Boundaries To reflect the comments from Administrations and Industry Organizations considered during review of the proposed Testing Guidelines associated with SOLAS Chapter II-1, Regulation 11, made during the IMO MSC and SDC meetings. 3-7-1/Table 2 Additional Testing Requirements for Vessels or Tanks of Special Service To reflect the comments from Administrations and Industry Organizations c