AASHTO HM-2018 PT III-2018 Standard Specifications for Transportation Materials and Methods of Sampling and Testing and Provisional Standards (2018 Edition).pdf

1、 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING and PROVISIONAL STANDARDS 2018 EDITION PART 1 SPECIFICATIONS PART 2 TESTS PART 3 PROVISIONALS Adopted by the ii New editions are published annually in three groups, broken up by subject area. 2018 by the Americ

2、an Association of State Highway and Transportation Officials. All Rights Reserved. Printed in the United States of America. This book, or parts thereof, may not be reproduced in any form without permission of the publishers. ISBN 978-1-56051-710-8 Published by the American Association of State Highw

3、ay and Transportation Officials 444 N. Capitol Street, N.W. Suite 249 Washington, D.C. 20001 (202) 624-5800 www.transportation.org PART 3AASHTO PROVISIONAL STANDARDS SUBJECT SEQUENCE TABLE OF CONTENTS Number Title AGGREGATES PP 64-11 (2017) AdoptedDetermining Aggregate Source Shap e Values from Digi

4、tal Image Analysis Shape Properties TP 81-12 (2017) AdoptedDetermining Aggregate Shape Properties by Means of Digital Ima ge Analysis TP 110-14 (2016) AdoptedPotential Alkali Reactivity of A ggregates and Effectiveness of ASR Mitigation Measures (Miniature Concrete Prism Test, MCPT) TP 120-16 (2018)

5、 Pore Index for Carbonate Coarse Aggregate BITUMINOUS MATERIALS MP 23-15 (2018) Reclaimed Asphalt Shingles for Use in Asphalt Mixtures MP 25-17 Performance-Graded Hot-Poured Asphalt Crack Sealant MP 26-15 (2018) Cotton Duck Fabric Bridge Bearings MP 27-16 (2018) Materials for Emulsified Asphalt Chip

6、 Seals MP 28-17 (2018) Materials for Micro Surfacing MP 31-17 Materials for Cold Recycled Mixtures with Emulsified Asphalt MP 32-17 Materials for Slurry Seal MP 33-17 Materials for Emulsified Asphalt Fog Seal MP 36-18 Materials for Asphalt Tack Coat MP 37-18 Performance-Graded Asphalt Binder for Sur

7、face Treatments MP 38-18 Mix Design of Cold Recycled Mixture with Foamed Asphalt PP 76-13 (2015) Troubleshooting Asphalt Specimen Volumetric Differences between Superpave Gyratory Compactors (SCGs) Used in the Design and the Field Management of Superpave Mixtures PP 77-14 (2018) Materials Selection

8、and Mixture Design of Permeable Friction Courses (PFCs) PP 78-17 Design Considerations When Using Reclaimed Asphalt Shingles (RAS) in Asphalt Mixtures PP 82-16 (2018) Emulsified Asphalt Chip Seal Design PP 83-16 (2018) Micro Surfacing Design PP 85-17 Grading or Verifying the Sealant Grade (SG) of a

9、Hot-Poured Asphalt Crack Sealant PP 86-17 Emulsified Asphalt Content of Cold Recycled Mixture Designs Number Title PP 87-17 Slurry Seal Design PP 88-17 Emulsified Asphalt Fog Seal Design PP 93-18 Asphalt Tack Coat Design PP 94-18 Determining Optimum Asphalt Content of Cold Recycled Mixture with Foam

10、ed Asphalt PP 95-18 Preparation of Indirect Tension Performance Test Specimens PP 96-18 Developing Dynamic Modulus Master Curves for Hot Mix Asphalt (HMA) Using the Indirect Tension Testing Method TP 82-10 (2017) DiscontinuedBulk Specific Gravity of Compacted Bituminous Mixtures Using Water Displace

11、ment Measured by Pressure Sensor TP 92-14 (2018) Determining the Cracking Temperature of Asphalt Binder Using the Asphalt Binder Cracking Device (ABCD) TP 101-12 (2018) Estimating Fatigue Resistance of Asphalt Binders Using the Linear Amplitude Sweep TP 102-16 AdoptedEvaluation of Asphalt Release Ag

12、ents (ARAs) TP 105-13 (2015) Determining the Fracture Energy of Asphalt Mixtures Using the Semicircular Bend Geometry (SCB) TP 107-18 Determining the Damage Characteristic Curve of Asphalt Mixtures from Direct Tension Cyclic Fatigue Tests TP 108-14 (2018) Abrasion Loss of Asphalt Mixture Specimens T

13、P 113-15 Determination of Asphalt Binder Resistance to Ductile Failure Using Double-Edge-Notched Tension (DENT) Test TP 114-18 Determining the Interlayer Shear Strength (ISS) of Asphalt Pavement Layers TP 115-16 (2017) Determining the Quality of Tack Coat Adhesion to the Surface of an Asphalt Paveme

14、nt in the Field or Laboratory TP 116-15 Rutting Resistance of Asphalt Mixtures Using Incremental Repeated Load Permanent Deformation (iRLPD) TP 117-15 Determination of the Voids of Dry Compacted Filler TP 121-16 AdoptedDetermining the Viscosity of Emulsified Asphalt by a Rotationa l Paddle Viscomete

15、r TP 122-16 (2018) Determination of Performance Grade of Physically Aged Asphalt Binder Using Extended Bending Beam Rheometer (BBR) Method TP 123-16 (2018) Measuring Asphalt Binder Yield Energy and Elastic Recovery Using the Dynamic Shear Rheometer TP 124-18 Determining the Fracture Potential of Asp

16、halt Mixtures Using Semicircular Bend Geometry (SCB) at Intermediate Temperature TP 125-16 (2018) Determining the Flexural Creep Stiffness of Asphalt Mixtures Using the Bending Beam Rheometer (BBR) Number Title TP 126-17 Evaluation of the Tracking Resistance of Hot-Poured Asphalt Crack Sealant by Dy

17、namic Shear Rheometer (DSR) TP 127-17 Determining the Fracture Energy Density of Asphalt Binder Using the Binder Fracture Energy (BFE) Test TP 128-17 Evaluation of Oxidation Level of Asphalt Mixtures by a Portable Infrared Spectrometer TP 131-18 Determining Dynamic Modulus of Asphalt Concrete Using

18、the Indirect Tension Test BOX CULVERT, CULVERT PIPE, AND DRAIN TILE MP 20-13 (2017) DiscontinuedSteel-Reinforced Polyethylene (PE) Ribbed Pipe, 300- to 1500-m m (12- to 60-in.) Diameter MP 22-13 (2017) Fiber-Reinforced Polymer Composite Materials for Highway and Bridge Structures CONCRETE PP 84-18 P

19、erformance Engineered Concrete Pavement Mixtures TP 109-14 (2016) AdoptedNonlinear Impact Resonance Acous tic Spectroscopy (NIRAS) for Concrete Specimens with Damage from the Alkali-Silica Reaction (ASR) TP 118-17 (2018) Characterization of the Air-Void System of Freshly Mixed Concrete by the Sequen

20、tial Pressure Method TP 119-15 (2017) Electrical Resistivity of a Concrete Cylinder Tested in a Uniaxial Resistance Test TP 129-18 Vibrating Kelly Ball (VKelly) Penetration in Fresh Portland Cement Concrete METALLIC MATERIALS AND COATINGS FOR BRIDGES MP 30M/MP 30-17 DiscontinuedSteel Wire and Welded

21、 Wire, Pla in and Deformed, for Concrete Reinforcement TP 84-11 (2017) DiscontinuedEvaluation of Adhesive Anchors in Concrete Under Sustained Loading Conditions MISCELLANEOUS PP 80-18 Continuous Thermal Profile of Asphalt Mixture Construction PP 81-18 Intelligent Compaction Technology for Embankment

22、 and Asphalt Pavement Applications TP 96-13 (2018) Protective Sealers for Portland Cement Concrete TP 103-13 (2018) Detectable Warning Systems PAINTING AND TRAFFIC MARKING AND SIGNING Number Title MP 24-15 (2018) Waterborne White and Yellow Traffic Paints PP 74-13 (2018) Determination of Size and Ro

23、undness of Glass Beads Used in Traffic Markings by Means of Computerized Optical Method TP 106-13 (2015) Determination of Heavy Metal Content of Glass Beads Using X-Ray Fluorescence (XRF) TP 111-14 (2018) Measuring Retroreflectivity of Pavement Marking Materials Using a Mobile Retroreflectivity Unit

24、 TP 130-18 Producing Draw Down Panels and Measuring the Coefficient of Retroreflected Luminance (RL) of Pavement Markings in a Laboratory Panel PAVEMENT SURFACE AND STRUCTURE CHARACTERISTICS MP 34-18 Materials for Sand Seals MP 35-18 Thin Overlay Treatments Using a Binder Resin System and Aggregate

25、for Concrete Surfaces PP 67-16 (2017) AdoptedQuantifying Cracks in Asphalt Pavement Surfaces from Collected Pavement Images Utilizing Automated Methods PP 68-14 (2017) AdoptedCollecting Images of Pavement S urfaces for Distress Detection PP 69-14 (2017) AdoptedDetermining Pavement Deformation Parame

26、ters and Cross Slope fr om Collected Transverse Profiles PP 70-14 (2017) AdoptedCollecting the Transverse Pavement Profile PP 79-14 (2016) High-Friction Surface Treatment for Asphalt and Concrete Pavements PP 90-18 Sand Seal Design PP 91-18 Emulsified Asphalt Scrub Seal Design TP 98-18 Determining t

27、he Influence of Road Surfaces on Vehicle Noise Using the Statistical Isolated Pass-By Method (SIP) TP 99-18 Determining the Influence of Road Surfaces on Traffic Noise Using the Continuous-Flow Traffic Time-Integrated Method (CTIM) QUALITY ASSURANCE PP 73-13 (2018) Quality Assurance, Job Site Qualit

28、y Control, and Reapplication of Protective Sealers for Portland Cement Concrete SOILS PP 92-18 Preparation of Test Specimens Using the Plastic Mold Compaction Device TP 100-12 (2016) Deep Foundation Elements for Bi-Directional Static Axial Compressive Load TP 104-13 (2015) Rapid Axial Compressive Lo

29、ad Testing of Deep Foundation Units Number Title TP 112-14 (2018) Determining In-Place Density and Moisture Content of Soil and SoilAggregate Using Complex Impedance Methodology PART 3AASHTO PROVISIONAL STANDARDS NUMERICAL SEQUENCE TABLE OF CONTENTS Number Title MP 20-13 (2017) DiscontinuedSteel-Rei

30、nforced Polyethylene (PE) Ribbed Pipe, 300- to 1500-m m (12- to 60-in.) Diameter MP 22-13 (2017) Fiber-Reinforced Polymer Composite Materials for Highway and Bridge Structures MP 23-15 (2018) Reclaimed Asphalt Shingles for Use in Asphalt Mixtures MP 24-15 (2018) Waterborne White and Yellow Traffic P

31、aints MP 25-17 Performance-Graded Hot-Poured Asphalt Crack Sealant MP 26-15 (2018) Cotton Duck Fabric Bridge Bearings MP 27-16 (2018) Materials for Emulsified Asphalt Chip Seals MP 28-17 (2018) Materials for Micro Surfacing MP 30M/MP 30-17 DiscontinuedSteel Wire and Welded Wire, Pla in and Deformed,

32、 for Concrete MP 31-17 Materials for Cold Recycled Mixtures with Emulsified Asphalt MP 32-17 Materials for Slurry Seal MP 33-17 Materials for Emulsified Asphalt Fog Seal MP 34-18 Materials for Sand Seals MP 35-18 Thin Overlay Treatments Using a Binder Resin System and Aggregate for Concrete Surfaces

33、 MP 36-18 Materials for Asphalt Tack Coat MP 37-18 Performance-Graded Asphalt Binder for Surface Treatments MP 38-18 Mix Design of Cold Recycled Mixture with Foamed Asphalt PP 64-11 (2017) AdoptedDetermining Aggregate Source Shap e Values from Digital Image Analysis Shape Properties PP 67-16 (2017)

34、AdoptedQuantifying Cracks in Asphalt Pavement Surfaces from Collected Pavement Images Utilizing Automated Methods PP 68-14 (2017) AdoptedCollecting Images of Pavement S urfaces for Distress Detection PP 69-14 (2017) AdoptedDetermining Pavement Deformation Parameters and Cross Slope fr om Collected T

35、ransverse Profiles PP 70-14 (2017) AdoptedCollecting the Transverse Pavement Profile PP 73-13 (2018) Quality Assurance, Job Site Quality Control, and Reapplication of Protective Sealers for Portland Cement Concrete Number Title PP 74-13 (2018) Determination of Size and Roundness of Glass Beads Used

36、in Traffic Markings by Means of Computerized Optical Method PP 76-13 (2015) Troubleshooting Asphalt Specimen Volumetric Differences between Superpave Gyratory Compactors (SCGs) Used in the Design and the Field Management of Superpave Mixtures PP 77-14 (2018) Materials Selection and Mixture Design of

37、 Permeable Friction Courses (PFCs) PP 78-17 Design Considerations When Using Reclaimed Asphalt Shingles (RAS) in Asphalt Mixtures PP 79-14 (2016) High-Friction Surface Treatment for Asphalt and Concrete Pavements PP 80-18 Continuous Thermal Profile of Asphalt Mixture Construction PP 81-18 Intelligen

38、t Compaction Technology for Embankment and Asphalt Pavement Applications PP 82-16 (2018) Emulsified Asphalt Chip Seal Design PP 83-16 (2018) Micro Surfacing Design PP 84-18 Performance Engineered Concrete Pavement Mixtures PP 85-17 Grading or Verifying the Sealant Grade (SG) of a Hot-Poured Asphalt

39、Crack Sealant PP 86-17 Emulsified Asphalt Content of Cold Recycled Mixture Designs PP 87-17 Slurry Seal Design PP 88-17 Emulsified Asphalt Fog Seal Design PP 89-18 Grinding the Ends of Cylindrical Concrete Specimens PP 90-18 Sand Seal Design PP 91-18 Emulsified Asphalt Scrub Seal Design PP 92-18 Pre

40、paration of Test Specimens Using the Plastic Mold Compaction Device PP 93-18 Asphalt Tack Coat Design PP 94-18 Determining Optimum Asphalt Content of Cold Recycled Mixture with Foamed Asphalt PP 95-18 Preparation of Indirect Tension Performance Test Specimens PP 96-18 Developing Dynamic Modulus Mast

41、er Curves for Hot Mix Asphalt (HMA) Using the Indirect Tension Testing Method TP 81-12 (2017) AdoptedDetermining Aggregate Shape Properties by Means of Digital Ima ge Analysis TP 82-10 (2017) DiscontinuedBulk Specific Gravity of Compacted Bituminous Mixtures Using Water Displacement Measured by Pres

42、sure Sensor TP 84-11 (2017) DiscontinuedEvaluation of Adhesive Anchors in Concrete Under Sustained Loading Conditions Number Title TP 92-14 (2018) Determining the Cracking Temperature of Asphalt Binder Using the Asphalt Binder Cracking Device (ABCD) TP 96-13 (2018) Protective Sealers for Portland Ce

43、ment Concrete TP 98-18 Determining the Influence of Road Surfaces on Vehicle Noise Using the Statistical Isolated Pass-By Method (SIP) TP 99-18 Determining the Influence of Road Surfaces on Traffic Noise Using the Continuous-Flow Traffic Time-Integrated Method (CTIM) TP 100-12 (2018) Deep Foundation

44、 Elements for Bi-Directional Static Axial Compressive Load TP 101-12 (2018) Estimating Fatigue Resistance of Asphalt Binders Using the Linear Amplitude Sweep TP 102-16 AdoptedEvaluation of Asphalt Release Agents (ARAs) TP 103-13 (2018) Detectable Warning Systems TP 104-13 (2015) Rapid Axial Compress

45、ive Load Testing of Deep Foundation Units TP 105-13 (2015) Determining the Fracture Energy of Asphalt Mixtures Using the Semicircular Bend Geometry (SCB) TP 106-13 (2015) Determination of Heavy Metal Content of Glass Beads Using X-Ray Fluorescence (XRF) TP 107-18 Determining the Damage Characteristi

46、c Curve of Asphalt Mixtures from Direct Tension Cyclic Fatigue Tests TP 108-14 (2018) Abrasion Loss of Asphalt Mixture Specimens TP 109-14 (2016) Nonlinear Impact Resonance Acoustic Spectroscopy (NIRAS) for Concrete Specimens with Damage from the Alkali-Silica Reaction (ASR) TP 110-14 (2016) Adopted

47、Potential Alkali Reactivity of A ggregates and Effectiveness of ASR Mitigation Measures (Miniature Concrete Prism Test, MCPT) TP 111-14 (2018) Measuring Retroreflectivity of Pavement Marking Materials Using a Mobile Retroreflectivity Unit TP 112-14 (2018) Determining In-Place Density and Moisture Co

48、ntent of Soil and SoilAggregate Using Complex Impedance Methodology TP 113-15 Determination of Asphalt Binder Resistance to Ductile Failure Using Double-Edge-Notched Tension (DENT) Test TP 114-18 Determining the Interlayer Shear Strength (ISS) of Asphalt Pavement Layers TP 115-16 (2017) Determining

49、the Quality of Tack Coat Adhesion to the Surface of an Asphalt Pavement in the Field or Laboratory TP 116-15 Rutting Resistance of Asphalt Mixtures Using Incremental Repeated Load Permanent Deformation (iRLPD) TP 117-15 Determination of the Voids of Dry Compacted Filler TP 118-17 (2018) Characterization of the Air-Void System of Freshly Mixed Concrete by the Sequential Pressure Method Number Title TP 119-15 (2017) Electrical Resistivity of a Concrete Cylinder Tested in a Uniaxial Resistance Test TP 120-16 (2018) Pore Index for Carbonate Coarse Aggregate TP 121-1