AECMA PREN 2591-607-1997 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part 607 Optical Elements Immunity to Ambient Light Coupling Edition P 1《航空航天系列.pdf

1、i Comments should be sent within six months after the date of Dubiication to AECMA STANDARD NORME AECMA AECMA NORM C2 Chairman prEN 259 1-607 Edition P 1 October 1997 PUBLISHED BY THE EUROPEAN ASSOCIATION OF AEROSPACE INDUSTRIES (AECMA) Gulledelle 94 - B-1200 BRUXELLES - Tel. (+32) 2 775 81 1 O - Fa

2、x. (+32) 2 775 81 11 ICs: Descriptors: ENGLISH VERSION Aerospace series Elements of electrical and optical connection Test methods Part 607: Optical elements Immunity to ambient light coupling Srie arospatiale Luft- und Raumfahrt Mthodes dessais Prfverf ahren Organes de connexion lectrique et optiqu

3、e Partie 607 : Organes optiques Immunit de couplage la lumire ambiante Elektrische und optische Verbindungselemente Teil 607: Optische Elemente Fremdlichteinkopplung This “Aerospace Series“ Prestandard has been drawn up under the responsibility of AECMA (The European Association of Aerospace Industr

4、ies). It is published on green paper for the needs of AECMA-Members. It has been technically approved by the experts of the concerned Technical Committee following comment by the Member countries. Subsequent to the publication of this Prestandard, the technical content shall not be changed to an ext

5、ent that interchangeability is affected, physically or functionally, without re-identification of the standard. After examination and signature of the AECMA Standard Checking Centre (NPS) and formal agreement of the Official Services of the Member countries it will be submitted as a draft European S

6、tandard to CEN (European Committee for Standardization) for formal vote. Nota - Extra cories can be suoolied by B.N.A.E. - Technopolis 54 - 199, rue Jean-Jacques Rousseau - 921 38 ISSY-LES-MOULINEAUX CEDEX Edition approved for publication ( AECMA Gulledelle 94 I Mr Perzetta I B-1200 BRUXELLES aecma

7、1997 Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STD.AECMA PREN 2591-bU7-ENGL 1997 3012311 0033497 095 I Page 3 prEN 2591 -607: 1997 Previous page

8、is blank 1 Scope This standard specifies a method of measuring the immunity of optical connection elements (including permanent connections) and fibre couplers to the coupling of power coming from an external light source. It shall be used together with EN 2591-100. 2 Normatives references This Euro

9、pean Standard incorporates by dated or undated reference provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications

10、apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. EN 2591-100 Aerospace series - Elements of electrical and optical connection - Test methods - General 1 3 Preparation of specimens

11、3.1 product standard. Cavities with unterminated contacts shall have filler plugs fitted (where applicable). The specimens shall be fitted with normal accessories and terminated as specified in the 3.2 - type and length of cable/fibre; - spectral characteristics of the light source or color temperat

12、ure of the black body radiation. Unless specified in the technical specification, the following details shall be stated: 4 Apparatus The apparatus shall comprise: C D a detector; Di a diffuser; IS an integration sphere; LA a locking amplifier to achieve the detection measurement; LDS a Light Detecto

13、r System in accordance with the spectral characteristics of the light source; Le a lens; LS a Light Source; T - a modulator set to frequency which is not a multiple of 50 Hz or 60 Hz; a terminator to provide a non reflective termination; a removable light proof element of the same length as the spec

14、imen; 1) In preparation at the date of publication of this standard. It will substitute for EN 2591. Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ST

15、D-AECMA PREN 2591-bD7-ENGL 1997 D 1012333 0033498 T2L = Page 4 prEN 2591 -607: 1997 I L/2 A typical arrangement is shown in figure 1. L/2 Di C I 7 r Specimen /- Removable light proof element / / C c Figure 1 , I 5 Method The method consists of measuring the ambient light coupled in the specimen by t

16、he use of an .integrated sphere (see figure 1). 5.1 Procedure Install the specimen in the light proof element. Turn on the LS, C, D, LDS and LA. Insert the specimen with the removable light proof element in the integrated sphere. Adjust the power of LS so that the output power is close to the upper

17、detection limits o measure the output powers Po and Pf. Remove the light proof element. If necessary, adjust the power of LS again so that new Pvalue Pi is equal to Po. Measure the new power P,. D and then Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS unde

18、r license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,- STD-AECMA PREN 2591-bO7-ENGL 1777 I 1012311 0013Li99 7b8 I Page 5 prEN 2591 -607: 1997 Po = level of optical power launched into the integration sphere after insertion of the removable light proof

19、 element with the specimen P, = level of optical power launched into the integration sphere after the light proof element has been removed Pf = ambient light coupled in the specimen in the removable light proof element P, = ambient light coupled in the specimen once the light proof element has been

20、removed 5.2 Final measurements and requirements Calculate the external light coupling coefficient with the help of the following equation: e - 4 PO Coupling coefficient (dB) = - NOTE: This calculation assumes that values Po and P, are equal. Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-