AECMA PREN 2997-012-2006 Aerospace series Connectors electrical circular coupled by threaded ring fire-resistant or non fire-resistant operating temperatures 65 to 175 continut.pdf

1、ASD STANDARD NORME ASD ASD NORM prEN 2997-012 Edition P 1 December 2006 PUBLISHED BY THE AEROSPACE AND DEFENCE INDUSTRIES ASSOCIATION OF EUROPE - STANDARDIZATION Gulledelle 94 - B-1200 Brussels - Tel. + 32 2 775 8126 - Fax. + 32 2 763 3565 - www.asd-stan.orgICS: 49.060 Descriptors: ENGLISH VERSION A

2、erospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65 C to 175 C continuous, 200 C continuous, 260 C peak Part 012: Jam-nut for jam-nut receptacles Product standard Srie arospatiale Connecteurs lectriques circulair

3、es accouplement par bague filete, rsistant au feu ou non, tempratures dutilisation 65 C 175 C continu, 200 C continu, 260 C en pointe Partie 012 : crou pour embase fixation par crou Norme de produit Luft- und Raumfahrt Elektrische Rundsteckverbinder mit Schraubkupplung, feuerbestndig oder nicht feue

4、rbestndig, Betriebstemperaturen 65 C bis 175 C konstant, 200 C konstant, 260 C Spitze Teil 012: Sechskantmutter fr festen Steckverbinder, Einlochmontage Produktnorm This “Aerospace Series“ Prestandard has been drawn up under the responsibility of ASD-STAN (The AeroSpace and Defence Industries Associ

5、ation of Europe - Standardization). It is published for the needs of the European Aerospace Industry. It has been technically approved by the experts of the concerned Domain following member comments. Subsequent to the publication of this Prestandard, the technical content shall not be changed to an

6、 extent that interchangeability is affected, physically or functionally, without re-identification of the standard. After examination and review by users and formal agreement of ASD-STAN, it will be submitted as a draft European Standard (prEN) to CEN (European Committee for Standardization) for for

7、mal vote and transformation to full European Standard (EN). The CEN national members have then to implement the EN at national level by giving the EN the status of a national standard and by withdrawing any national standards conflicting with the EN. Edition approved for publication 31 December 2006

8、 Comments should be sent within six months after the date of publication to ASD-STAN Electrical Domain Copyright 2006 by ASD-STAN Copyright European Association of Aerospace Industries Provided by IHS under license with AECMA Not for ResaleNo reproduction or networking permitted without license from

9、 IHS-,-,-prEN 2997-012:20062 Contents Page Foreword2 1 Scope 3 2 Normative references 3 3 Terms and definitions .3 4 Required characteristics.4 5 Designation 5 6 Marking .5 7 Technical specification .5 Foreword This standard was reviewed by the Domain Technical Coordinator of ASD-STANs Electrical Do

10、main. After inquiries and votes carried out in accordance with the rules of ASD-STAN defined in ASD-STANs General Process Manual, this standard has received approval for Publication. Copyright European Association of Aerospace Industries Provided by IHS under license with AECMA Not for ResaleNo repr

11、oduction or networking permitted without license from IHS-,-,-prEN 2997-012:20063 1 Scope This standard specifies the characteristics of jam-nuts for jam-nut receptacles in the family of circular electrical connectors coupled by threaded ring. It applies to class defined in Table 2. For receptacles

12、using these jam-nuts, see EN 2997-004, EN 2997-006 and EN 4067-004, EN 4067-006 for class SE only. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the lates

13、t edition of the referenced document (including any amendments) applies. ISO 263, ISO inch screw threads General plan and selection for screws, bolts and nuts Diameter range 0,06 to 6 in. EN 2997-001, Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non

14、fire-resistant, operating temperatures 65 C to 175 C continuous, 200 C continuous, 260 C peak Part 001: Technical specification. EN 2997-002, Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65 C to 175 C contin

15、uous, 200 C continuous, 260 C peak Part 002: Specification of performance and contact arrangements. EN 2997-004, Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65 C to 175 C continuous, 200 C continuous, 260 C

16、 peak Part 004: Jam-nut mounted receptacle Product standard. EN 2997-006, Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65 C to 175 C continuous, 200 C continuous, 260 C peak Part 006: Hermetic jam-nut mounte

17、d receptacle Product standard. EN 4067-002, Aerospace series Connectors, electrical, circular, scoop-proof, coupled by threaded ring, fire-resistant, operating temperature 260C peak Part 002: Specification of performance and contacts arrangement. 1)EN 4067-004, Aerospace series Connectors, electrica

18、l, circular, scoop-proof, coupled by threaded ring, fire-resistant, operating temperature 260 C peak Part 004: Jam-nut mounted receptacle Product standard. 1)EN 4067-006, Aerospace series Connectors, electrical, circular, scoop-proof, coupled by threaded ring, fire-resistant, operating temperature 2

19、60 C peak Part 006: Hermetic jam-nut mounted receptacle Product standard. 1)3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 2997-001 apply. 1) Published as ASD Prestandard at the date of publication of this standard. Copyright European Association of

20、Aerospace Industries Provided by IHS under license with AECMA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-prEN 2997-012:20064 4 Required characteristics 4.1 Dimensions See Figure 1 and Table 1. Key 1 3 holes 1,07 min. equally spaced Figure 1 Table 1 Housing siz

21、e K Thread class 2B a HH 08 0,6250-25UN 21,06 20,19 10 0,7500-20UNEF 24,23 23,37 12 0,9380-20UNEF 29,01 28,14 14 1,0000-20UNEF 30,61 29,74 16 1,1250-18UNEF 33,76 32,89 18 1,2500-18UNEF 36,96 36,09 20 1,3750-18UNEF 40,11 39,24 22 1,5000-18UNEF 43,31 42,44 24 1,6250-18UNEF 46,46 45,59 28 1,8750-16UNS

22、54,41 53,54 aISO 263. Copyright European Association of Aerospace Industries Provided by IHS under license with AECMA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-prEN 2997-012:2006 5 4.2 Material, surface treatment See Table 2. 4.3 Main general characteristics

23、See EN 2997-002 and EN 4067-002. 5 Designation EXAMPLE Description block ELECTRICAL CONNECTOR, JAM-NUT Identity block EN2997RS822 Number of the basic standard Class (see Table 2) Jam-nut for jam-nut receptacle (see EN 2997-002 and EN 4067-002) Housing size Table 2 Class Model description WS Jam-nut

24、for receptacle with housing (shell) in olive-green, cadmium-plated aluminium alloy, conducting finish, 500 h resistance to salt mist, maximum operating temperature 175 C continuous. RS Jam-nut for receptacle with housing (shell) in nickel-plated aluminium alloy, 48 h resistance to salt mist, maximum

25、 operating temperature 200 C continuous. SE Jam-nut for receptacle with housing (shell) in passivated stainless steel, fire-resistant, 500 h resistance to salt mist, maximum operating temperature 260 C peak. NOTE SE class jam-nut are used for both S, SE, Y and YE classes jam-nut receptacles. 6 Marking Not applicable. 7 Technical specification See EN 2997-001. Copyright European Association of Aerospace Industries Provided by IHS under license with AECMA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-