AECMA PREN 3475-413-1996 Aerospace Series Cables Electrical Aircraft Use Test Methods Part 413 - Wrap Back Test《航天系列 飞行器用的电缆试验方法.第413部分 回卷绕试验》.pdf

1、U- Draft for Public Comment Document DC 97/703900Dc Latest date for receipt of comments Project No 97 1236 31 May 1997 Our ref Date 26 February 1997 ACE/ 6 / 2 Sub-camittee ACE/6/2 Aerospace - Cables DRAFT EuRLIpEAN SIANDARD - PIEROSPACE SERIES CABLES ELEETRICAL AIRCRAFT USE TEST METHom PART 413 - W

2、RAP BACK TEST This draft is now available for public comment and your views and technical comments on it would be appreciated. If you have no specific comments to make but nd it generally acceptable it would be helpful if you would notify us accordingly Suggestions entailing revision of the text sho

3、uld indicate the preferred wording. Please quote the relevant clause number against any comment. The co-ordination of the requirements of this draft with those of any related standards is of particular importance and you are invited to point out any areas where this may be necessaq. All comments sho

4、uld be sent to the Committee Secretary at the London address below. The comments received will be passed to the committee concerned for its consideration; no acknowledgement will normally be sent. MRFPSLOT Requests for purchase of further copies of this draft should be sent to: Custo er Services, at

5、 the head office address below. Telephone 0181 996 7000, fax 0181 996 7001. Price1 7 -Se to Subscribing Member , who will be invoiced. Orders not accompanied by a remittance will be subject to a delay. Non-members should send a remittance of 3 5 09 together with an addressed label. THIS IS A DRAFT A

6、ND MUST NOT BE REGARDED OR USED AS A BRITISH STANDARD Head office 389 Chiswick High Road London W4 4AL Telephone O181 996 9000 Fhx O181 996 7400 97/703900Dc Form 36: Part 1 9307 Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for

7、ResaleNo reproduction or networking permitted without license from IHS-,-,-Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BSI COMMITTEES TO WHOSE MEMB

8、ERS THIS DRAFT HAS ALSO BEEN SENT STANDARDS COMMITTEE AND SECRETARY ONLY) TECHNICAL COMMITTEE ACE/6 AEROSPACE AVIONIC ELECTRICIAL AND FIBRE E/- SECTOR BOARD FOR ENGINEERING OPTIC TECHNOLOGY SUB-COMMITTEE ACE/6/2 _-_-_- AEROSPACE - CABLES CONSTITUTION ORGANIZATIONS REPRESENTED _- _-_- BRITISH AIRWAYS

9、 BRITISH APPROVALS SERVICE FOR CABLES BRITISH CABLE MAKERS CONFEDERATION BRITISH HYDROMECHANICS RESEARCH GROUP CIVIL AVIATION AUTHORITY EUROPEAN SPACE AGENCY MINISTRY OF DEFENCE SOCIETY OF BRITISH AEROSPACE COMPANIES LIMITED - A2 - 97/703900 Copyright Association Europeene des Constructeurs de Mater

10、iel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking per

11、mitted without license from IHS-,-,-prEN 3475-413 DRAFT EUROPEAN (AECMA) AEROSPACE STANDARD This DPC refers to a draft text currently at the PPN ballot stage within a Technical Committee of AECMA (The European Association of Aerospace Industries)”. The voting period within the AECMA Technical Commit

12、tee is two months from the date of despatch of the document and this will be completed before the expiry of the DPC comment date. Any comments received as a result of the DPC, after the expiry of the PPN ballot, will be reviewed by the BSI Committee and taken into account when they consider the UK v

13、iew and vote on a possible BS EN publication. AECMA consists of the national aerospace trade associations from nine European countries, the UK member being SBAC (Society of British Aerospace Companies). AECMA has been given a mandate by CEN to prepare all European aerospace standards on its behalf.

14、Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license

15、 with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NORME EUROPEENNE EUROPISCHE NORM EUROPEAN STANDARD prEN 3475 Part 413 Edition : OCTOBER 1996 Replaces issues : CDU : 621 316 57 : 629.7 Keywords : Aircraft Industry, aircraft equipment, lectrical cables, te

16、st Luft - und Raumfahrt Elektrischen Leitungen fr Luftfahrt Verwendung Prfung 41 3 - Wickelprfung AECMNC2 (Sec.) Etude : C2/02 English Version Aerospace series Cables electrical aircraft use Test methods Part 413 - Wrap back test Srie arospatiale Cbles lectriques Mthodes dessais Partie 413 - Control

17、e par enroulement du scellement DRAFT PROJET ENTWURF Master document 10196 Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-prEN 3475 - 413 page left in

18、tentionally blank Page 2 Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-prEN 3475 - 413 Page 3 1. SCOPE AND FIELD OF APPLICATION This standard specifi

19、es a method for detecting cracking, porosity and bad adhesion of the various layers of PTFE insulation tape on a finished cable. It shall be used together with EN 3475-1 OO. 2. REFERENCES EN 3475-100 EN 3475-302 Ae.ospace senes - Cables, electrical, aircraft use - Test methods, Pari 100 - General Ae

20、rospace series - Cables, electrical, aircraft use - Test methods, Pari 302 - Voltage proof test 3. PREPARATION OF A SPECIMEN The preparation of a specimen shall consist in winding a sufficient length 01 completed cable around itself at least 1 O times, so that the cable itself acts as a mandrel. 4.

21、APPARATUS An air circulating oven shall be required for this test. 5. METHOD 5.1 . Procedure The prepared specimen shall be placed in the oven at a temperature of (31 O +5)“C for 2 h. After the 3 h, the specimen shall be removed from the oven and cooled for at least 1 h at ambient temperature. 5.2 .

22、 Requirements After being returned to ambient temperature the PTFE cable insulation shall show no cracking or debonding of layers along the insulation. The specimen shall pass the voltage proof test requirements specified in EN 3475-302 : - after being wound before aging, - after aging ,still wound,

23、 - after being unwound and straightened. Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Copyright Association Europeene des Constructeurs de Materiel

24、Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitt

25、ed without license from IHS-,-,-Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Copyright Association Europeene des Constructeurs de Materiel Aerospati

26、al Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-