AECMA PREN 3645-011-2005 Aerospace series Connectors electrical circular scoop-proof triple start threaded coupling operating temperature 175 degrees C or 200 degrees C continuous .pdf

1、ASD STANDARD NORME ASD ASD NORM prEN 3645-011 Edition P1 November 2005 PUBLISHED BY THE AEROSPACE AND DEFENSE INDUSTRIES ASSOCIATION OF EUROPE - STANDARDIZATION Gulledelle 94 - B-1200 Brussels - Tel. + 32 2 775 8126 - Fax. + 32 2 763 3565 - www.asd-stan.orgICS: 49.060 Descriptors: ENGLISH VERSION Ae

2、rospace series Connectors, electrical, circular, scoop-proof, triple start threaded coupling operating temperature 175 C or 200 C continuous Part 011: Lanyard release plug with grounding fingers Type 1 Product standard Srie arospatiale Connecteurs lectriques circulaires contacts protgs, accouplement

3、 par filetage pas rapide trois filets, tempratures dutilisation 175 C ou 200 C continu Partie 011 : Fiche largable avec bague de blindage Type 1 Norme de produit Luft- und Raumfahrt Elektrische Rundsteckverbinder, kontaktgeschtzt, Drei-gangige Gewinde-Schnellkupplung Dauerbetriebstemperaturen 175 C

4、oder 200 C Teil 011: Abreistecker mit Massefingerringen Typ 1 Produktnorm This “Aerospace Series“ Prestandard has been drawn up under the responsibility of ASD-STAN (The Aerospace and Defense Industries Association of Europe - Standardization). It is published for the needs of the European Aerospace

5、 Industry. It has been technically approved by the experts of the concerned Domain following member comments. Subsequent to the publication of this pre-standard, the technical content shall not be changed to an extent that interchangeability is affected, physically or functionally, without re-identi

6、fication of the standard. After examination and review by users and formal agreement of ASD-STAN, it will be submitted as a draft European Standard (prEN) to CEN (European Committee for Standardization) for formal vote and transformation to full European Standard (EN). The CEN national members have

7、then to implement the EN at national level by giving the EN the status of a national standard and by withdrawing any national standards conflicting with the EN. Edition approved for publication 30 November 2005 Comments should be sent within six months after the date of publication to ASD-STAN Elect

8、rical Domain Copyright 2005 by ASD-STAN Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Page 2 prEN 3645-011:2005Foreword This standard was reviewed by

9、 the Domain Technical Coordinator of ASD-STANs Electrical Domain. After inquiries and votes carried out in accordance with the rules of ASD-STAN defined in ASD-STANs General Process Manual, this standard has received approval for Publication. Contents Page 1 Scope.3 2 Normative references3 3 Definit

10、ions.4 4 Required characteristics4 4.1 Dimensions, weights .4 4.2 Materials and surface treatment 5 4.3 lectrical, mechanical and climatic characteristics5 5 Designation 6 6 Marking.7 7 Technical specification.7 Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IH

11、S under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Page 3 prEN 3645-011:20051 Scope This standard specifies the characteristics of releasable plugs with shielding rings, type 1, in the family of circular, electrical connectors, with triple st

12、art threaded coupling. It applies to model in table 3. For receptacles and protective covers, see EN 3645-003, EN 3645-004, EN 3645-005, EN 3645-007, EN 3645-009 and EN 3645-010 respectively. For contacts, sealing plugs and rear accessories associated with this plug, see EN 3645-002. These connector

13、s are derived from and interchangeable with models W and F in specification MIL-DTL-38999/29 or MIL-DTL-38999/30. 2 Normative references This European Standard incorporates by dated or undated reference provisions from other publications. These normative references are cited at the appropriate place

14、s in the text and the publications are listed hereafter. For dated and undated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the public

15、ation referred to applies. EN 3645-001, Aerospace series Connectors electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 001: Technical specification 1) EN 3645-002, Aerospace series Connectors electrical, circular, scoop-proof, trip

16、le start threaded coupling, operating temperature 175 C or 200 C continuous Part 002: Specification of performance and contact arrangements 1)EN 3645-003, Aerospace series Connectors electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Pa

17、rt 003: Wall-mount receptacle Product standard 1)EN 3645-004, Aerospace series Connectors electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 004: Receptacle, hermetic, square flange mounting Product standard 1)EN 3645-005, Aerospac

18、e series Connectors electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 005: Receptacle, hermetic, round flange, brasage mounting Product standard 1)EN 3645-007 Aerospace series Connectors electrical, circular, scoop-proof, triple s

19、tart threaded coupling, operating temperature 175 C or 200 C continuous Part 007: Protective cover for plug Product standard EN 3645-009, Aerospace series Connectors electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 009: Receptacl

20、e, round flange, jam nut mounting - Product standard 1)EN 3645-010, Aerospace series Connectors electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 010: Receptacle, hermetic, round flange, jam nut mounting - Product standard 1) 1)Pu

21、blished as AECMA Prestandard at the date of publication of this standard Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Page 4 prEN 3645-011:2005MIL-D

22、TL-38999/29, Connectors, electrical, circular, miniature, high density, quick disconnect (bayonet, threaded and breach coupling), environment resistant, removable crimp and hermetic solder contacts, plug, lanyard release, fail safe, triple start threaded coupling, removable crimp contacts, pins, ser

23、ies III, metric 2)MIL-DTL-38999/30, Connectors, electrical, circular, miniature, high density, quick disconnect (bayonet, threaded and breach coupling), environment resistant, removable crimp and hermetic solder contacts, plug, lanyard release, fail safe, removable crimp contacts, sockets, series II

24、I, metric 2)3 Definitions See EN 3645-001. 4 Required characteristics 4.1 Dimensions, weights See Figure 1, Tables 1 and 2. Dimensions and tolerances are in millimetres. NOTE: a Displacement of ring during release b Maximum diameter of accessory for displacement of the ring c See Table 2 Figure 1 Pl

25、ug 2)Published by: Department of Defense (DOD), The Pentagon, Washington D.C. 20301 USA Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Page 5 prEN 364

26、5-011:2005 Table 1 - Plug - Dimensions Shell size A max. C max. VV thread Mass g max. 09 - - - 11 46,9 25,0 M 15x1 - 6g 0,1 R 45 13 50,1 29,1 M 18x1 - 6g 0,1 R 60 15 52,8 32,5 M 22x1 - 6g 0,1 R 75 17 56,0 35,7 M 25x1 - 6g 0,1 R 95 19 59,2 38,5 M 28x1 - 6g 0,1 R 110 21 62,8 41,7 M 31x1 - 6g 0,1 R 120

27、 23 65,9 44,9 M 34x1 - 6g 0,1 R 130 25 68,7 48,0 M 37x1 - 6g 0,1 R 150 Table 2 - Cord codes and lengths Code L 6 Code L 6 A 102 M 254 B 115 N 267 C 127 P 280 D 140 R 293 E 153 S 305 F 166 T 318 G 178 U 331 H 191 V 356 I 203 W 381 J 216 X 407 K 229 Y 432 L 242 Z 458 4.2 Materials and surface treatmen

28、t See Table 3. 4.3 Electrical, mechanical and climatic characteristics See EN 3645-002. Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Page 6 prEN 364

29、5-011:20055 Designation EXAMPLE: Description block ELECTRICAL CONNECTOR Identity block EN3645-W8CN35MAB Number of the basic standard Model according to Table 3 Shell code for releasable plug, type 1 Shell size code according to Table 4 Letter indicating if the contact arrangement have grounded cavit

30、ies or not only N: no grounded cavity Contact arrangement according to EN 3645-002 Contact coding according to Table 5 Polarisation: N, A, B, C, D, E Code for cord length according to table 2 NOTE: If necessary, the code 19005 shall be placed between the classification block and the identity block.

31、Table 3 - Model coding Model Description W Sealed plugs, with shell in cadmium-plated aluminium alloy, olive green Salt spray resistance 500 h Plug with shielding ring Crimped contacts Maximum operating temperature 175 C continuous F Sealed plugs, with shell in cadmium-plated aluminium alloy Crimped

32、 contacts Plug with shielding Maximum operating temperature 200 C continuous Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Page 7 prEN 3645-011:2005

33、Table 4 Shell size code Shell size Code 09 A 11 B 13 C 15 D 17 E 19 F 21 G 23 H 25 J Table 5 Contact coding Contact Product marking Order coding Supplied without contacts Supplied with contacts EN 3155-xxxx2222 EN 3155-xxxx2020 EN 3155-xxxx1616 EN 3155-xxxx1212 EN 3155-xxxx1010 Male M A M Female F B F 6 Marking According to EN 3645-001. 7 Technical specification According to EN 3645-001. Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-