AECMA PREN 3660-036-2008 Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 036 Spacer pad for cable outlet style Z Produ.pdf

1、ASD STANDARD NORME ASD ASD NORM prEN 3660-036 Edition P 1 December 2008 PUBLISHED BY THE AEROSPACE AND DEFENCE INDUSTRIES ASSOCIATION OF EUROPE - STANDARDIZATIONAvenue de Tervuren, 270 - B-1150 Brussels - Tel. + 32 2 775 8126 - Fax. + 32 2 763 3565 - www.asd-stan.orgICS: 49.060 Descriptors: Aeronaut

2、ical industry, aircraft equipment, accessories, electrical connection equipment,electrical connector, characteristics, outlet, backshells ENGLISH VERSION Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 036: Spacer pad for cable outlet, st

3、yle Z Product standard Srie arospatiale Accessoires arrire pour connecteurs circulaires et rectangulaires lectriques et optiques Partie 036 : Coussinet pour sortie de cble, type Z Norme de produit Luft- und Raumfahrt Endgehuse fr elektrische und optische Rund- und Rechteck- steckverbinder Teil 036:

4、Abstandshalter, Bauform Z Produktnorm This “Aerospace Series“ Prestandard has been drawn up under the responsibility of ASD-STAN (The AeroSpace and Defence Industries Association of Europe - Standardization). It is published for the needs of the European Aerospace Industry. It has been technically a

5、pproved by the experts of the concerned Domain following member comments. Subsequent to the publication of this Prestandard, the technical content shall not be changed to an extent that interchangeability is affected, physically or functionally, without re-identification of the standard. After exami

6、nation and review by users and formal agreement of ASD-STAN, it will be submitted as a draft European Standard (prEN) to CEN (European Committee for Standardization) for formal vote and transformation to full European Standard (EN). The CEN national members have then to implement the EN at national

7、level by giving the EN the status of a national standard and by withdrawing any national standards conflicting with the EN. Edition approved for publication 31 December 2008 Comments should be sent within six months after the date of publication to ASD-STAN Electrical Domain Copyright 2008 by ASD-ST

8、AN Copyright ASD-STAN Provided by IHS under license with AECMA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-prEN 3660-036:2008 2 Contents Page Foreword2 1 Scope 3 2 Normative references 3 3 Terms and definitions .3 4 Characteristics.3 5 Designation 4 6 Marking .

9、4 7 Technical specification .4 Foreword This standard was reviewed by the Domain Technical Coordinator of ASD-STANs Electrical Domain. After inquiries and votes carried out in accordance with the rules of ASD-STAN defined in ASD-STANs General Process Manual, this standard has received approval for P

10、ublication. Copyright ASD-STAN Provided by IHS under license with AECMA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-prEN 3660-036:20083 1 Scope This product standard defines a spacer pad, style Z, for use under the following conditions: Associated cable outlet(

11、s) : EN 3660-002 Temperature range : 65 C to 200 C 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including

12、any amendments) applies. EN 3660-001, Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 001: Technical specification. EN 3660-002, Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part

13、 002: Index of product standards. 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 3660-001 apply. 4 Characteristics 4.1 Dimensions For dimensions, see Figure 1. All dimensions are in millimetres. Figure 1 Copyright ASD-STAN Provided by IHS under licen

14、se with AECMA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-prEN 3660-036:20084 4.2 Material and mass Material: Elastomer Mass: 0,65 g max. 4.3 Tests Test and qualification are performed on appropriate cable outlet. 5 Designation EXAMPLE 1 Identity block EN3660-0

15、36A Product standard Spacer pad EXAMPLE 2 EN3660-036A Spacer pad, elastomer NOTE No gaps are required between sections in the part number when printed. 6 Marking Refer to EN 3660-001. 7 Technical specification Refer to EN 3660-001. Copyright ASD-STAN Provided by IHS under license with AECMA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-