1、STD-AECMA PREN 3708-001-ENGL L79b 1012311 OOLZL90 OTO = Edition approved for publication AECMA STANDARD NORME AECMA AECMA NORM C2 Chairman Comments should be sent within six months after the date of publication to prEN 3708-001 Edition P 2 November 1996 ICs : 49.060 PUBLISHED BY THE EUROPEAN ASSOCIA
2、TION OF AEROSPACE INDUSTRIES (AECMA) Guiledelle 94 - 8-1200 BRUXELLES - Tel. (32) 2 775 81 10 - Fax. (32) 2 775 81 11 Supersedes edition P 1 September 1995 Descriptors : Aircraft industry, connecting equipment, terminai strips, specifications, characteristics, tests, quality assurance, qualification
3、, testing conditions ENGLISH VERSION Aerospace series Modular interconnection systems Terminal junction systems Part O0 1 : Technical specification Srie arospatiale Luft- und Raumfahrt Systmes dinterconnexions modulaires Verteilersystem in modularer Bauweise Partie O01 : Spcification technique Barre
4、ttes de raccordement Vertefiermodule Teil 001 : Technische Lieferbedingungen This “Aerospace Series“ Prestandard has been drawn up under the responsibility of AECMA (The European Association of Aerospace Industries). It is published on green paper for the needs of AECMA-Members. It has been technica
5、lly approved by the experts of the concerned Technical Committee following comment by the Member countries. Subsequent to the publication of this Prestandard, the technical content shall not be changed to an extent that interchangeability is affected, physically or functionally, without re-identific
6、ation of the standard. After examination and signature of the AECMA Standard Checking Centre INPS) and formal agreement of the Official Services of the Member countries it will be submitted as a draft European Standard to CEN (European Committee for Standardization) for formal vote. 1996-1 1-29 AECM
7、A Gulledelle 94 6-1 200 BRUXELLES Mr Pezzetta 1 I I aecma 19! - - Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Page 2 prEN 3708-001 : 1996 10 11 Con
8、tents list Scope Normative references Definitions Description Design Definition drawings and masses Tests Quality assurance Identification and marking Packaging Storage Page 3 3 4 5 6 6 6 14 18 18 18 Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under lice
9、nse with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,- STDnAECMA PREN 370-OOL-ENGL 199b LO12311 OOL2172 973 M Page 3 prEN 3708-001 : 1996 1 Scope This standard specifies the general characteristics of terminal junction systems for modular interconnection sy
10、stems as well as test conditions, test programme and groups for quality assurance. It applies to products specially adapted to provide connections within a very reduced space for variable extendable, divisible, transformable and interchangeable combinations of equipment within a temperature range fr
11、om - 55 OC to 175 OC, and for altitudes up to 21 O00 m for sealed modules or up to 13 700 m for unsealed modules. The conditions of use shall be in accordance with EN 2282. It also applies to interconnections incorporating components. 2 Normative references This European Standard incorporates by dat
12、ed or undated reference provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard o
13、nly when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. EN 2266-002 EN 2282 EN 2591 * EN 3042 EN 3155-016 EN 3708-002 MI L-A-8 243D MIL-C-25769J MIL-L-7870A MIL-L-23699C MIL-STD-454M AS 124A TR 4257 Aerospace series - Ca
14、bles, electrical, for general purpose - Operating temperature between - 55 OC and 200 OC - Part 002 : General 1) Aerospace series - Characteristics of aircraft electrical supplies Aerospace series - Elements of electrical and optical connection - Test methods - General Aerospace series - Quality ass
15、urance - EN aerospace products - Qualification procedure Aerospace series - Electrical contacts used in elements of connection - Part O16 : Contacts, electrical, male 016, type A, crimp, class S - Product standard 2) Aerospace series - Modular interconnection systems - Terminal junction systems - Pa
16、rt 002 : Performance specification 1) Anti-icing and deicing-defrosting fluids 3) Cleaning compound, aircraft surface, alkaline water base 3) Lubricating oil, general purpose, low temperature 3) Lubricating oil, aircraft turbine engine, synthetic base 3) Electronic equipment, standard general requir
17、ements for - Requirement 4 : Fungus - inert material 31 Fire-resistant phosphate ester hydraulic fluid for aircraft 4) Aerospace series - Elements of electrical and optical connection - Relationship between the numbering systems for parts of EN 2591 5) * 1 i Published as AECMA Prestandard at the dat
18、e of publication of this standard 2) In preparation at the date of publication of this standard 3) Published by : Department of Defense (DODI, the Pentagon, Washington, D.C. 20301 USA. 4) Published by : Society of Automotive Engineers, Inc. (SAE) 400 Commonwealth Drive, Warrendale, 5) Published as A
19、ECMA Technical Report at the date of publication of this standard Including all its parts quoted PA 15096-001 USA. Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license f
20、rom IHS-,-,-Page 4 prEN 3708-001 : 1996 3 Definitions For the purposes of this standard, the following definitions apply : 3.1 Modular interconnection system An arrangement permitting the interconnection of contacts according to a predetermined design. NOTE 1 : The female contacts are fitted in the
21、module or extension piece and the male contacts are removable and crimped on. NOTE 2 : Climatic category and assembly are defined in EN 3708-002. 3.2 Assembly of associated removable modules with their components, which are also removable, assembled on a frame. Removable module terminal junction sys
22、tem 3.3 Frame Generally metal parts of a specified shape constituting both the assembly system for removable modules and removable components and the mounting system for the whole. 3.4 Removable module Connector device composed of one or more groups of defined contacts, disposed inside an insulating
23、 box and connected together according to a predefined design. NOTE 1 : It can readily be positioned, repositioned or removed from the frame for ease of connection or modification of a terminal junction system. NOTE 2 : A removable module may be either of the feedback or feed-through type. 3.4.1 Remo
24、vable feedback module Module on which access to the contacts is on one face of the module only. 3.4.2 Removable feed-through module Module on which access to the contacts is on two opposite faces of the module. 3.5 Removable components Accessories generally associated with the module, such as end pl
25、ates, module clamps, etc 3.6 Group of contacts Assembly of several contacts electrically interconnected. 3.7 Interconnection diagram Electrical arrangement of the group or groups of contacts within a modular interconnection system 3.8 Module clamp Appropriate device for mounting an assembly of modul
26、es on a frame Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,- STD-AECMA PREN 3708-001-ENGL 197b 1012311 OULZL7V 7qb Page 5 prEN 3708-001 : 1996 3.9 In
27、sulator Removable wall of insulating material for insertion between two modules to provide supplementary insulation between them. 3.1 O Mounting carrier Device suitable for mounting one, two or three modules 3.1 1 Device with one or more quick-release feed-through connections inside an insulating sl
28、eeve Connector - extension piece 3.1 2 Individual connector terminals Individual quick-release terminals generally used for earthing. 3.13 Earth module Module with a group of electrically interconnected contacts and mounted with a bolt or a carrier and earthed by a metal plate 3.14 Removable feedbac
29、k or feed-through modules, the contacts of which are electrically connected to one or more electrical components in different combinations. Modules for or with components 3.15 Devices with the same function as standard extension piece connectors except that components such as resistors, diodes, or f
30、uses are incorporated in them. See also EN 2591. Connectors - extension pieces with components 4 Description A modular interconnection system comprises one or more insulating boxes fitted with contacts, which may or may not be mounted in a support or frame in conformity with its product standard. It
31、s cavities take crimped contacts as defined in EN 31 55-01 6 and, on request, blanking devices. 4.1 Products The products covered by this standard shall include : a) removable module terminal junction systems mounted on various supports or frames, in sealed and unsealed versions : I! feedback type;
32、2) feed-through type. b) frames with accessories for removable modules; c) mounting carriers for modules; d) connectors - extension pieces; e) individual terminals; f) earth modules; g) modules for or with components; h) connectors - extension pieces with components. Copyright Association Europeene
33、des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STD-AECMA PREN 3708-001-ENGL 177b 1012311 0012195 b82 = Page 6 prEN 3708-001 : 1996 4.2 Contacts See EN 31 55-01 6. Contacts exist in f
34、our sizes : 22, 20, 16, 12. Unsealed modules do not include contacts of sizes 16 and 12. 5 Design Materials not specified and not specially described shall be the lightest possible for the required application. When dissimilar metals are in close contact, adequate protection against corrosion shall
35、be used for the electromotive force of the cell which shall not exceed 0,25 V. Insertion and extraction of contacts shall be through sockets located on the access surface or surfaces. If tools are necessary for insertion and extraction of contacts, their use shall not impair the product characterist
36、ics. 6 Definition drawings and masses The general dimensions and masses of the different components and the interconnection diagrams constituting a modular interconnection system are defined in the product standards. 7 Tests 7.1 General See table 1 Table 1 EN 2591-1 1 o1 102 20 1 Title Visual examin
37、ation Examination of dimensions and mass Contact resistance - low level Details Initial examination : examination of components (modules, extension pieces, etc.), detached parts (contacts, mounting components, supports, etc.) Details to be examined : - identification; - appearance; - marking; - surf
38、ace finish. See product standard The contact resistance shall not exceed the value shown in the table below. The values recorded shall be divided by two to give the contact resistance of one contact. Contact Ontact resistance I size I ma 1 I The relationship between the numerical numbering system an
39、d the former alphanumerical numbering system for parts of EN 2591 is given in TR 4257. (co nti n ued ) Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
40、 STD-AECMA PREN 3708-001-ENGL 199b LO12311 ULZL7b 517 Page 7 prEN 3708-001 : 1996 Table 1 (continued) EN 2591- 202 Title Contact resistance at rated current r- ir Details See figures 1 and 2 The contact resistance shall not exceed the value shown in the table below. The values recorded shall be divi
41、ded by two to give the contact resistance of one contact. I size I resistance I current Rated I Contact Contact 16 13 12 2 23 - Maximum sect ion 1 I I I I module I I Feedback L-,-J Figure 1 : Resistance test for feedback module Feed-throuah module Figure 2 : Resistance test for feed-through module (
42、continued Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,- STD-AECMA PREN 3708-001-ENGL L77b .I 10123L1 0012177 455 Contact size 22 20 16 12 Page 8 prE
43、N 3708-001 : 1996 Current Duration A S 10,5 3 600 15 22 75 06 14 3 600 20 22 1 O0 O, 6 21 3 600 30 22 150 0,6 36 3 600 50 22 2 50 13 Table 1 (continued) EN 2591- 203 204 205 206 207 208 209 21 o Title Electrical continuity at microvolt level Discontinuity of contacts in the microsecond range Housing
44、 (shell) electrical continuitv Measurement of insulation resistance Voltage proof test Temperature rise due to rated current Current temperature derating Electrical overload Details Not applicable Duration of micro-discontinuity : I 1 ps Method B Test time : throughout the duration of tests 402 and
45、403 Not applicable Method C Fully wired specimens. Insulation resistance at ambient temperature : 5 O00 MQ min. During test 303 and after test 304 : 100 MR min. During test 301 and after tests 311, 314 and 315 : 1000MRmin. Method C Test voltage after tests 314 or 31 1 : - 1 500 V r.m.s. frequency 50
46、 Hz, normal pressure; - 350 V r.m.s. frequency 50 Hz voltage at 14,7 kPa for unsealed modules; - 350 V r.m.s. frequency 50 Hz voltage at 4,67 kPa for sealed modules. The test voltage shall be applied between two adjacent insulated contacts. The maximum leakage current shall not exceed 2 mA. Not appl
47、icable See 4.2.1 of EN 3708-002. I Temperature Contact I Diagram I Supply points size number electric overload measurina ooint AO 1 A02 A03 A04 A05 A06 KL DU AY EX DY HP (continued Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot f
48、or ResaleNo reproduction or networking permitted without license from IHS-,-,-STDaAECMA PREN 3708-003-ENGL 399b m 30323LL 0032398 371 m Contact size Page 9 prEN 3708-001 : 1996 Diagram Supply points Temperature number electric overload measuring point Table 1 (continued) 20/12 Title Hybrid module, s
49、izes 20 - 51 I HK F and 12 Details 303 iN 2591- Cold/low pressure and damp heat I interconnection diacirams 1 Contact size 20 - Module - or by extension of qualification for variants not presented at the first presentation, but only in cases where the technology and materials are identical: a) for sealed modules, only group
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1