AECMA PREN 4645-005-2008 Aerospace series Connectors optical circular single and multipin coupled by threaded ring self-locking 1 25 mm diameter ferrule with removable alignment sl.pdf

1、ASD STANDARD NORME ASD ASD NORM prEN 4645-005 Edition P 1 September 2008 PUBLISHED BY THE AEROSPACE AND DEFENCE INDUSTRIES ASSOCIATION OF EUROPE - STANDARDIZATIONAvenue de Tervuren, 270 - B-1150 Brussels - Tel. + 32 2 775 8126 - Fax. + 32 2 763 3565 - www.asd-stan.orgICS: Descriptors: ENGLISH VERSIO

2、N Aerospace series Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder Part 005: Plug Product standard Srie arospatiale Connecteurs optiques circulaires accouplement par bague filete, auto-freinant

3、e ferrule 1,25, quips dun porte sleeve dmontable Partie 005 : Fiche Norme de produit Luft- und Raumfahrt Optische Rundsteckverbinder mit Schraubkupplung, selbstsichernd Ferrulendurchmesser 1,25 mm, demontierbarer Zentrierhlsenhalter Teil 005: Fester Steckverbinder Produktnorm This “Aerospace Series“

4、 Prestandard has been drawn up under the responsibility of ASD-STAN (The AeroSpace and Defence Industries Association of Europe - Standardization). It is published for the needs of the European Aerospace Industry. It has been technically approved by the experts of the concerned Domain following memb

5、er comments. Subsequent to the publication of this Prestandard, the technical content shall not be changed to an extent that interchangeability is affected, physically or functionally, without re-identification of the standard. After examination and review by users and formal agreement of ASD-STAN,

6、it will be submitted as a draft European Standard (prEN) to CEN (European Committee for Standardization) for formal vote and transformation to full European Standard (EN). The CEN national members have then to implement the EN at national level by giving the EN the status of a national standard and

7、by withdrawing any national standards conflicting with the EN. Edition approved for publication 30 September 2008 Comments should be sent within six months after the date of publication to ASD-STAN Electrical Domain Copyright 2008 by ASD-STAN Copyright ASD-STAN Provided by IHS under license with AEC

8、MA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-prEN 4645-005:20082 Contents Page Foreword2 1 Scope 3 2 Normative references 3 3 Terms and definitions .3 4 Required characteristics.4 5 Plug connector designation .5 6 Marking .6 7 Technical specification .6 8 Qua

9、lity.6 Foreword This standard was reviewed by the Domain Technical Coordinator of ASD-STANs Electrical Domain. After inquiries and votes carried out in accordance with the rules of ASD-STAN defined in ASD-STANs General Process Manual, this standard has received approval for Publication. Copyright AS

10、D-STAN Provided by IHS under license with AECMA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-prEN 4645-005:2008 3 1 Scope This standard specifies the characteristics of mounted plug receptacles in the family of circular connectors with triple start threaded coup

11、ling. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applied. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2424, Aerospace s

12、eries Marking aerospace products. EN 3645-003, Aerospace series Connectors, electrical, circular, scoop-proof, triple start threading coupling operating temperatures 175 C or 200 C continuous Part 003: Receptacle square flange mounting Product standard. EN 4639-101, Aerospace series Connectors, opti

13、cal, rectangular, modular, multicontact, 1,25 mm diameter ferrule, with removable alignment sleeve holder Part 101: Optical contact for cable EN 4641-100 Operating temperature between 65 C and 152 C Product standard. EN 4639-102, Aerospace series Connectors, optical, rectangular, modular, multiconta

14、ct, 1,25 mm diameter ferrule, with removable alignment sleeve holder Part 102: Optical contact for cable EN 4641-102 Operating temperature between 55 C and 100 C Product standard. EN 4645-001, Aerospace series Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking

15、 1,25 mm dia. Ferrule with removable alignment sleeve holder Part 001: Technical specification. 1)EN 4645-002, Aerospace series Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm dia. Ferrule with removable alignment sleeve holder Part 002: Specificati

16、on of performance and contact arrangements. 1)EN 9133, Aerospace series Quality management systems Qualification procedure for aerospace standard parts. 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 4645-001 apply. The sleeve holder is delivered wit

17、h the female arrangement. It is considered as a part of the female arrangement (specific design per manufacturer). The sleeve holder can be supplied separately only for repair purpose. 1) Published as ASD Prestandard at the date of publication of this standard. Copyright ASD-STAN Provided by IHS und

18、er license with AECMA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-prEN 4645-005:20084 4 Required characteristics 4.1 Dimensions and masses The plug connector includes the female arrangement. The female arrangement is equipped with a removable alignment sleeve h

19、older. The removable sleeve holder is delivered with the female arrangement. It is considered as a part of the female arrangement (specific design per manufacturer). The sleeve holder can be supplied separately only for repair purpose. See Figure 1 and Table 1. Dimensions and tolerances are in milli

20、metres. Key 1 See Note NOTE Blue band indicates rear release contact retention system. Figure 1 All other dimensions are in accordance with EN 3645-003 standard. 1 Copyright ASD-STAN Provided by IHS under license with AECMA Not for ResaleNo reproduction or networking permitted without license from I

21、HS-,-,-prEN 4645-005:20085 Table 1 A Mass g max. max. Class Shell Size mm F, W, O K, S J, M, C B 11 11,05 21,00 49,00 16,00 48,00 13 14,00 31,00 60,00 23,00 58,00 15 16,92 39,00 72,00 29,00 69,00 17 20,09 48,00 101,00 37,00 97,00 19 22,78 56,00 124,00 46,00 118,00 21 25,96 67,00 144,00 54,00 137,00

22、23 29,13 77,00 159,00 63,00 152,00 25 32,31 88,00 175,00 74,00 166,00 4.2 Material and surface treatment See EN 4645-002, Table 1. 4.3 Optical, mechanical and climatic characteristics See EN 4645-002. 5 Plug connector designation EXAMPLE Description block CONNECTOR, OPTICAL Identity block EN4645-6XX

23、XXXX Number of the basic standard Plug Housing size (see EN 4645-002) Arrangement code (see EN 4645-002) Environmental class (see EN 4645-002) Polarization (see EN 4645-002) Copyright ASD-STAN Provided by IHS under license with AECMA Not for ResaleNo reproduction or networking permitted without lice

24、nse from IHS-,-,-prEN 4645-005:20086 6 Marking The marking shall include the identification the date of manufacture (year, week) and the name or trade mark of the manufacturer or conform to standard EN 2424, code P, if required. 7 Technical specification See specific optical contact EN 4639-101 and EN 4639-102 product standard. 2)8 Quality According to EN 9133. 2) Performance is directly linked to optical contact and fibre technology. Copyright ASD-STAN Provided by IHS under license with AECMA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-