AECMA PREN 6074-1998 Aerospace Series Metallic Materials Test Methods Statistical Data for Material Qualification Edition P 1《航空航天系列.金属物质试验方法统计资料物质.P1版》.pdf

1、STD.AECMA PREN b74-ENGL L798 LL23LL 0L5b57 055 AECMA STANDARD NORME AECMA AECMA NORM prEN 6074 Edition P 1 November 1998 PUBLISHED BY THE EUROPEAN ASSOCIATION OF AEROSPACE INDUSTRIES (AECMA) Gulledelle 94 8-1200 BRUXELLES - Tel. +32) 2 775 81 10 Fax. (+32) 2 775 81 11 ICs: Descriptors: ENGLISH VERSI

2、ON Aerospace series Metallic materials Test methods Statistical data for material qualification Srie arospatiale Matriaux mtalliques Mthodes dessai Donnes statistiques pour la qualification des matriaux Luft- und Raumfahrt Metallische Werkstoffe Prfverfahren Statistische Daten fr Werkstoff Qualifika

3、tionen This “Aerospace Series“ Prestandard has been drawn up under the responsibility of AECMA (The European Association of Aerospace Industries). It is published on green paper for the needs of AECMA-Members. It has been technically approved by the experts of the concerned Technical Committee follo

4、wing comment by the Member countries. Subsequent to the publication of this Prestandard, the technical content shall not be changed to an extent that interchangeability is affected, ph ysically or functionally, without re-identification of the standard. After examination and signature of the AECMA S

5、tandard Checking Centre (NPS) and formal agreement of the Official Services of the Member countries it will be submitted as a draft European Standard to CEN (European Committee for Standardization) for formal vote. I Nota - Extra copies can be supplied by B.N.A.E. - Technopoiis 54 - 199, rue Jean-Ja

6、cques Rousseau - 921 38 ISSY-LES-MOULINEAUX CEDEX Edition approved for publication 1998-1 1-30 AIBITFG Chairman Comments should be sent within six months after the date of oublication to AECMA Gulledelle 94 8-1 200 BRUXELLES Mr W. Lampa aecma 1998 Copyright Association Europeene des Constructeurs de

7、 Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Contents list 1 Scope 2 Normative references 3 Definitions, symbols and abbreviations 4 Principle of the method 5 Statistical processing tools 6 Procedure

8、7 8 Test report Annex A (normative): Presentation of initial data Annex B (normative): Presentation in graphical form Annex C (normative): Presentation of statistical analysis results Evaluation and presentation of results Copyright Association Europeene des Constructeurs de Materiel Aerospatial Pro

9、vided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,- STD-AECMA PREN 6074-ENGL 1778 D LUL2311 00LSb57 728 D Page 3 prEN 6074: 1998 1 Scope This standard defines the procedure to be followed in order to give purchaser, statistical man

10、ufacturing data, that contributes to manufacturer qualification to the relevant material standard and the continuation of this qualification. This standard is suitable for any type of data resulting from previous production acceptance tests of the product from the manufacturer to be qualified. This

11、statistical evaluation is a part of the technical qualification. 2 Normative references This European Standard incorporates by dated or undated reference provisions from other publications. These normative references are at the appropriate places in the text and the publications are listed hereafter

12、. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. IS0 3534 Statistics-Vocabulary and symbo

13、ls MIL-HDBK 5 G Metallic-Materials and Elements for Aerospace Vehicle Structures 1) 3 Definitions, symbols and abbreviations For the purposes of this standard the following definitions apply: 3.1 Material characteristics and symbols R, = Tensile strength R0,* = A % = Elongation in percent K, = Fract

14、ure toughness K, = Impact energy y = Electrical conductivity Tensile yield stress at which permanent strain equals 0,2 % 3.2 Statistical definitions and symbols See IS0 3534 A value: B value: Value of the variable (V) taken into account (Rm, A%, .), such that the probability P (V Value A) 99% guaran

15、teed with 95% confidence. Value of the variable (V) taken into account (Rm, A%, .), such that the probability P (V Value A) 90% guaranteed with 95% confidence. 3.3 Abbreviations SPC: Statistic Process Control FMECA: Failure Mode Effects and Criticality Analysis I) Published by: Department of Defense

16、 (DoD), the Pentagon, Washington D.C., 20301, USA Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Page 4 prEN 6074: 1998 4 Principle of the method See

17、figure i. Sampling I t Graphic representations and calculations on initial data: in histogram form in time base form calculations of mean values and standard deviation Normal rule or skewed normal rule Weibull rule or other A See MIL HDBK5 Chapter 9 or X2 - I Calculations of A and B values of the po

18、pulation t Yes a Statistical ) qualification is agreed Statistical qualification s suspended B If delivery is required, individual values given purchaser value for acceptation tests. acceptance tests by the purchaser. To propose corrective (or remedial) actions. * FoIIow-uP I Calculations of A and B

19、 values of the population f Yes u Statistical n qualification is agreed Figure 1 : Principle of Statistical qualification for each characteristic, thickness, range, direction of the relevant product Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under licen

20、se with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,- STD-AECMA PREN b07Li-ENGL 1778 = 1012311 0015bb1 58b M Page 5 prEN 6074: 1998 5 Statistical processing tools The statistic processing may be carried out with a software system available on the market or

21、a software system developed in house. 6 Procedure The procedure consists in: - defining the data sampling to be dealt with, - testing the statistical method named in the present standard, which is the most suitable for the data sampling to be dealt with, - comparing the results of the statistical an

22、alysis with the requirements in order to pass qualification tests, - proposing a protocol of corrective and curative actions, when the tests show negative results. See figure 1. 6.1 Sampling 6.1.1 Evaluation statement There are three types of statistical evaluation Type I - The material is not new f

23、or the manufacturer but it is qualified according to a specification other than an EN (Material Standard). In this case, the data package may be used for constitution of the technical file requested for technical qualification. Type II - The material is a new material for the manufacturer, who makes

24、 another similar material using the same process. In the case where the lower limits for A and B values are not supplied through the literature, the supplier shall give its own initial specifications based on available data. Type III - The material is a new material for the manufacturer and for the

25、purchaser. Statistical A and B values do not exist yet. For each type of statistical evaluation, the purchaser and the manufacturer shall agree on the initial data package to be analysed in accordance with the following principle, and on an initial material specification see table 1. Table 1 Type of

26、 sampling to be analysed statistically Qualification requirements Release data of the previous production of the material to be qualified. EN standard values plus the rule used for their calculation. Release data of the previous production of the most similar material to the materiat to be qualified

27、. EN standard values plus the rule used for their calculation. Release data of the previous production of the most similar material to the material to be qualified. EN standard values plus the rule used for their calculation. Copyright Association Europeene des Constructeurs de Materiel Aerospatial

28、Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STD-AECMA PREN b074-ENGL Page 6 prEN 6074: 1998 6.1.2 Definition of statistical sampling - The samplings to be statistically processed are those which are related to all the rel

29、ease tests (also those not successful), for instance as a min. R, R, A% in Long and Transverse directions, and, if possible K, 7, O Standard deviation O : -1 value for 25 % I% : l I I 2 1. n Dates Frequency Variable Unit Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provi

30、ded by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STD.AECMA PREN b07i.I-ENGL 1798 D 1012311 OOLSbbb Obi! D Page 10 prEN 6074: 1998 Name Annex C (normative) Presentation of statistical analysis results Value Variable I F x100 % x75 %

31、 x50 % x25 % xo Yo Unit - Mean value I Rule Normale Weibull Other Standard deviation 1-1 Test Name Name Values Value Value Test I O Name Value Value -I- Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-