AECMA TR 7000-5-2006 Aerospace series Non-metallic materials Rules for the drafting and presentation of material standards Part 5 Glass transparencies Edition 1《航空航天系列.非金属物质规则提案展示物.pdf

1、ASD Technical Report Rapport Technique ASD ASD Fachbericht TR 7000-5 Edition 1 May 2006 PUBLISHED BY THE AEROSPACE AND DEFENSE INDUSTRIES ASSOCIATION OF EUROPE - STANDARDIZATIONGulledelle 94 - B-1200 Brussels - Tel. + 32 2 775 8126 - Fax. + 32 2 763 3565 - www.asd-stan.orgICS: Descriptors: ENGLISH V

2、ERSION Aerospace series Non-metallic materials Rules for the drafting and presentation of material standards Part 5: Glass transparencies Srie arospatiale Matriaux non-mtalliques Rgles pour la prparation et la prsentation des normes de matriaux Partie 5 : Matriaux transparents en verre Luft- und Rau

3、mfahrt Nichtmetallische Werkstoffe Regeln fr die Erstellung und die Gestaltung von Werkstoffnormen Teil 5: Transparente Werkstoffe aus Glas This Technical Report was drawn up by the Non-metallic Material Domain of ASD-STAN. The reason which led to the publication of the document as a Technical Repor

4、t is explained in the foreword. Edition approved for publication 31 May 2006 Non-metallic Material Domain Copyright 2006 by ASD-STAN Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMA Not for ResaleNo reproduction or networking permitte

5、d without license from IHS-,-,-TR 7000-5:05-20062 Contents Page Foreword2 Introduction .3 1 Scope 3 2 References3 2.1 Normative references 3 2.2 Informative references 3 3 Definitions, symbols and abbreviations3 4 Rules for the drafting and presentation 3 4.1 Title3 4.2 Contents .4 4.3 Clause 3: Onw

6、ards 4 4.4 General requirements4 4.4.1 Table 1 General requirements4 4.4.2 Tables 2 to 4 .4 Annex A (normative) Table A1 Characteristic numbers applicable to Table 1: General requirements 5 Annex B (normative) Table B1 Characteristic numbers applicable to Tables 2 to 4 Other requirements 6 Annex C (

7、informative) Example .7 Foreword The main task of ASD-STAN is to prepare EN standards. In exceptional circumstances, however, the publication of a Technical Report of one of the following types may be proposed : - type 1, the subject is still under technical development requiring wider exposure ; -

8、type 2, a Technical Committee has collected data of a different kind from that which is normally published as a European Standard. The Non-metallic Material Domain decided to publish this document in the form of a Technical Report of type 2 in order to facilitate the updating of this document. Copyr

9、ight Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-TR 7000-5:05-2006 3 Introduction This standard is part of the series of EN non-metallic materials standards

10、 for aerospace applications. The general organization of this series is described in EN 4385. This document is a level 2 document as defined in EN 4385. 1 Scope This standard specifies the rules for drafting and presentation of EN aerospace series non-metallic material standards for glass transparen

11、cies for aerospace applications. This standard shall be used in conjunction with TR 7000-1. 2 References 2.1 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, t

12、he latest edition of the referenced document (including any amendments) applies. TR 7000-1, Aerospace series Non-metallic materials Rules for the drafting and presentation of material standards Part 1: General rules. 1)2.2 Informative references EN 4385, Aerospace series Non-metallic materials Gener

13、al organisation of standardisation Links between types of standards. 2)3 Definitions, symbols and abbreviations For the purposes of this document, the definitions, symbols and abbreviations given in TR 7000-1 and the following apply. 4 Rules for the drafting and presentation NOTE The examples given

14、below are only intended to illustrate the rules, and may not correspond to real standardised EN products. 4.1 Title See TR 7000-1 and Annex C of this standard. The following are examples of descriptions which shall be used; these examples may be supplemented by other descriptions as required by the

15、relevant Working Group. 1) Published as ASD Technical Report at the date of publication of this standard. 2) Published as ASD Prestandard at the date of publication of this standard. Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMA No

16、t for ResaleNo reproduction or networking permitted without license from IHS-,-,-TR 7000-5:05-2006 4 1) Type of glass (composition) soda lime high light transmission soda lime special glass for chemical reinforcement 2) Type of process float cast stretched 3) Type of reinforcement annealed thermally

17、 strengthed chemically strengthed 4.2 Contents See TR 7000-1 and Annex C of this standard. 4.3 Clause 3: Onwards See TR 7000-1 and Annex C of this standard. 4.4 General requirements See TR 7000-1. 4.4.1 Table 1 General requirements The characteristic numbers applicable to Table 1 are given in Annex

18、A of this standard. All of the characteristics given in Table 1 are mandatory and shall be completed in accordance with TR 7000-1 and Annex C of this standard. 4.4.2 Tables 2 to 4 See TR 7000-1 and Annex C of this standard. The characteristic numbers applicable to Tables 2 to 4 are given in Annex B

19、of this standard. Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-TR 7000-5:05-2006 5 Annex A (normative) Table A1 Characteristic numbers applicable t

20、o Table 1: General requirements Characteristic number Characteristics 1.001 Material description 1.002 Formulation 1.003 Form and method of production 1.004 Technical specification 1.005 Grade 1.010 Storage 1.011 Shelf life 1.013 Processing condition 1.093 Quality assurance 1.094 Designation 1.098 H

21、ealth and safety 1.999 Notes Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-TR 7000-5:05-2006 6 Annex B (normative) Table B1 Characteristic numbers a

22、pplicable to Tables 2 to 4 Other requirements Normally used in table(s) Characteristic number Characteristic 2 3 4 110 Dimensional tolerances X 110 Flatness X 111 Refractive index X 111 Light transmission X 111 Haze X 111 Optical distortion X 111 Optical defects X 301 Density X 303 Linear thermal ex

23、pansion X 308 Surface compressive stress X 311 Modulus of rupture X Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-TR 7000-5:05-2006 7 Annex C (infor

24、mative) Example Example C.1 EN xxxxENGLISH VERSION Aerospace series Non-metallic materials Glass transparencies Material standard Thermally tempered soda lime float glassSrie arospatiale Matriaux non-mtalliques Transparents en verre Norme de matriaux Feuilles de verre sodo calcique flott trempes the

25、rmiquement Luft-und Raumfahrt Nichtmetallische Werkstoffe Transparente Glaswerkstoffe Werkstoffe Norm Thermisch vorgespanntes Kalk-Natron-Floatglas Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMA Not for ResaleNo reproduction or netw

26、orking permitted without license from IHS-,-,-TR 7000-5:05-2006 8 Example C.1 (continued) Page 2 EN xxxx Blank page Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMA Not for ResaleNo reproduction or networking permitted without license

27、 from IHS-,-,-TR 7000-5:05-20069 Example C.1 (continued) Page 3 EN xxxx Introduction This standard is part of the series of EN non-metallic materials standards for aerospace applications. The general organization of this series is described in EN 4385. This standard is a level 3 document as defined

28、in EN 4385. It has been prepared in accordance with TR 7000-5. 1 Scope This standard specifies the requirements relating to thermally tempered float glass plies, visible light transmission and high light transmission, for aerospace applications. 2 References 2.1 Normative references The following re

29、ferenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 3001, Aerospace series Tempered float glass plies for aircraft

30、 applications Technical specification. 1)2.2 Informative references EN 4385, Aerospace series Non-metallic materials General organisation of standardisation Links between types of standards. 1)TR 7000-5, Aerospace series Non-metallic materials Rules for the drafting and presentation of material stan

31、dards Part 5: Glass transparencies. 2)3 Definitions, symbols and abbreviations 3.1 Definitions For the purpose of this document the following definitions apply: 3.1.1 Definition of sub-case numbering In the column requirement at the left hand side a sub-case number is given. The definition of these

32、sub-case numbers is as follows: 1) Published as ASD Prestandard at the date of publication of this standard. 2) Published as ASD Technical Report at the date of publication of this standard. Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with

33、AECMA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-TR 7000-5:05-200610 Example C.1 (continued) Page 4 EN xxxx Sub-case number Definition Technical specification 1 Test method 2 Frequency of testing 3 Sample type 4 Test piece definition 5 Conditioning of test pie

34、ce 6 Testing condition 7 Acceptance criteria NOTE 1 The absence of a sub-case indicates that the necessary information is given in Table 1 of this standard, e.g. in the reference to the technical standard (characteristic number 1.004). All the necessary information which does not appear is to be fou

35、nd in the referenced technical specification or the relevant test method. NOTE 2 In this material standard, batch acceptance test titles and sub-case 7 acceptance criteria are highlighted in the form of a bold frame and bold characters to show that they are mandatory for routine acceptance of the ma

36、terial. 3.1.2 Type A Universally available float glass 3.1.3 Type B High light transmission float glass 3.1.4 Other definitions See EN 3001. 4 Requirements The required characteristics are given in: Table 1 General requirements Table 2 Requirements in the delivery condition Table 3 Requirements as p

37、rocessed to characteristic number 1.013 Table 4 Environmental testing requirements as processed to characteristic number 1.013 Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMA Not for ResaleNo reproduction or networking permitted with

38、out license from IHS-,-,-TR 7000-5:05-2006 11 Example C.1 (continued) Page 5 EN xxxx Table 1 General requirements Characteristic number Characteristic Requirements 1.001 Material description Glass transparency 1.002 Formulation Soda-lime glass, see EN 3001. 1.003 Form and method of production Therma

39、lly strengthened float glass 1.004 Technical specification EN 3001 1.005 Grade A03 A04 A05 A06 A08 Type A A A A A Thickness mm 0 89 88,2 87,3 86,4 84,6 A10 A12 A15 A19 B08 82,8 81,2 78,2 74,9 90,5 Light transmission 6 800 nm high 7% B08 80,7 Haze 7 % 1 Optical distortion 7 See EN 3001. Optical defec

40、ts 7 See EN 3001. 2.301 Density 7 g/cm32,50 0,02 2.303 Linear expansion 7 10-7/K 88,5 3,5 2.308 Surface compression stress 7MPa Shall comply with the limits agreed during product qualification 2.311 Modulus of rupture 7MPa Shall comply with the limits agreed during product qualification 2.999 Notes

41、Table 3 Requirements as processed to characteristic number 1.013 Not required refer to Table 2 Table 4 Environmental testing requirements as processed to characteristic number 1.013 No requirement Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-