AHRI 700-2015 Specifications for Refrigerants (Incorporates Addendum 1 September 2015).pdf

1、 2015 Standard for Specifications for Refrigerants AHRI Standard 700 with Addendum 1 AHRI STANDARD 700-2015 WITH ADDENDUM 1, SPECIFICATIONS FOR REFRIGERANTS September 2015 Addendum 1 (dated September 2015) of AHRI Standard 700-2015, Specifications for Refrigerants, modifies AHRI Standard 700-2015 as

2、 follows. The following changes have been incorporated (additions are shown with shading and the deletions shown with strikethroughs) as well as the addition of refrigerants R-1336mzz(Z), R-449A, R-451A, R-451B, R-452A, R-453A, R-454A, R-454B, and R-513A to the scope of Section 2 and to Table 1A, Ta

3、ble 2A, and Table 3 respectively of AHRI Standard 700-2015. The September 2015 Addendum 1 has been incorporated into the already published 2015 version of AHRI Standard 700 to avoid confusion. The changes include: 2.1.1 Single-Component Fluorocarbon Refrigerants: R-11; R-12; R-13; R-22; R-23; R-32;

4、R-113; R-114; R-115; R-116; R-123; R-124; R-125; R-134a; R-141b; R-142b; R-143a; R-152a; R-218; R-227ea; R-236fa; R-245fa; R-1233zd(E); R-1234yf; R-1234ze(E); and R-1336mzz(Z) 2.1.4 Zeotropic Blend Refrigerants: R-401A; R-401B; R-402A; R-402B; R-403A; R-403B; R-404A; R-405A; R-406A; R-407A; R-407B;

5、R-407C; R-407D; R-407E; R-407F; R-408A; R-409A; R-409B; R-410A; R-410B; R-411A; R-411B; R-412A; R-413A; R-414A; R-414B; R-415A; R-415B; R-416A; R-417A; R-417B; R-417C; R-418A; R-419A; R-419B; R-420A; R-421A; R-421B; R-422A; R-422B; R-422C; R-422D; R-422E; R-423A; R-424A; R-425A; R-426A; R-427A; R-42

6、8A; R-429A; 430A; R-431A; R-434A; R-435A; R-437A; R-438A; R-439A; R-440A; R-442A; R-444A; R-444B; R-445A; R-446A; R-447A; R-448A; R-449A; R-449B; R-450A; R-451A; R-451B; R-452A; R-453A; R-454A; and R-454B 2.1.6 Azeotropic Blend Refrigerants: R-500; R-502; R-503; R-507A; R-508A; R-508B; R-509A; R-510

7、A; R-511A; R-512A; and R-513A. New refrigerants added: Table 1A. Single Component Fluorocarbon Refrigerants and their Allowable Levels of Contaminants Reporting Units R-1336mzz(Z) CHARACTERISTICS: Boiling Point1 C 101.3 kPa 33.4 Boiling Point Range1 K N/A Critical Temperature1 C 171.3 Isomer Content

8、 % by weight 0 - 0.1 R-1336mzz(E) Isomer VAPOR PHASE CONTAMINANTS: Air and Other Non-condensables, Maximum % by volume 25.0C N/A2 LIQUID PHASE CONTAMINANTS: Water, Maximum ppm by weight 20 All Other Volatile Impurities, Maximum % by weight 0.5 High Boiling Residue, Maximum % by volume or % by weight

9、 0.01 Halogenated Unsaturated Volatile Impurities, Maximum ppm by weight N/A Particulates/Solids Pass or Fail Visually clean Acidity, Maximum ppm by weight (as HCl) 1 Chloride3 Pass or Fail No visible turbidity Notes: 1. Boiling points, boiling point ranges and critical temperatures, although not re

10、quired, are provided for informational purposes. Refrigerant data compiled from Refprop 9.1. 2. Since R-11, R-113, R-123, R-141b, R-245fa, R-1233zd(E), and R-1336mzz(Z) have normal boiling points near or above room temperature, non-condensable determinations are not required for these refrigerants.

11、3. Recognized chloride level for pass/fail is about 3 ppm. N/A Not Applicable Table 2A. Zeotropic Blends (400 Series Refrigerants) and their Allowable Levels of Contaminants Reporting Units R-449B R-451A R-451B R-452A CHARACTERISTICS: Refrigerant Components N/A R-32/125/1234yf /134a R-1234yf/134a R-

12、1234yf/134a R-32/125/1234yf Nominal Comp % by weight 25.2 / 24.3 / 23.2 / 27.3 89.8 / 10.2 88.8 / 11.2 11.0 / 59.0 / 30.0 Allowable Comp % by weight 23.7-25.5 /24.0-25.8 /21.7-23.5 /27.0-28.8 89.6-90.0 / 10.0-10.4 88.6-89.0 / 11.0-11.4 9.3-12.7 /57.2-60.8 /29.0-30.1 Bubble Point C 101.3 kPa -46.1 -3

13、0.8 -31.0 -47.0 Dew Point C 101.3 kPa -40.2 -30.5 -30.6 -43.2 Critical Temperature C 84.2 95.4 95.5 74.9 VAPOR PHASE CONTAMINANTS: Air and Other Non-condensables % by volume 25.0C 1.5 1.5 1.5 1.5 LIQUID PHASE CONTAMINANTS: Water ppm by weight 10 10 10 10 All Other Volatile Impurities % by weight 0.5

14、 0.5 0.5 0.5 High Boiling Residue % by volume or % by weight 0.01 0.01 0.01 0.01 Particulates/Solids Pass or Fail Visually clean Visually clean Visually clean Visually clean Acidity ppm by weight (as HCl) 1 1 1 1 Chloride Pass or Fail No visible turbidity No visible turbidity No visible turbidity No

15、 visible turbidity Notes: 1. Bubble points, dew points and critical temperatures, although not required, are provided for informational purposes. Refrigerant data compiled from Refprop 9.1. 2. Recognized chloride level for pass/fail is about 3 ppm. N/A Not Applicable Table 2A. Zeotropic Blends (400

16、Series Refrigerants) and their Allowable Levels of Contaminants Reporting Units R-453A R-454A R-454B CHARACTERISTICS: Refrigerant Components N/A R-32/125/134a /227ea/600/601a R-32/1234yf R-32/1234yf Nominal Composition % by weight 20.0/20.0/53.8 /5.0/0.6/0.6 35.0 / 65.0 68.9 / 31.1 Allowable Composi

17、tion % by weight 19.0-21.0 /19.0-21.0 /52.8-54.8 /4.5-5.5 /0.4-0.7/0.4-0.7 33.0-37.0 /63.0-67.0 67.9-69.9 /30.1-32.1 Bubble Point1 C 101.3 kPa -42.2 -48.4 -50.9 Dew Point1 C 101.3 kPa -35.0 -41.6 -50.0 Critical Temperature1 C 88.0 86.2 76.5 VAPOR PHASE CONTAMINANTS: Air and Other Non-condensables, M

18、aximum % by volume 25.0C 1.5 1.5 1.5 LIQUID PHASE CONTAMINANTS: Water, Maximum ppm by weight 10 10 10 All Other Volatile Impurities, Maximum % by weight 0.5 0.5 0.5 High Boiling Residue, Maximum % by volume or % by weight 0.01 0.01 0.01 Particulates/Solids Pass or Fail Visually clean Visually clean

19、Visually clean Acidity, Maximum ppm by weight (as HCl) 1 1 1 Chloride2 Pass or Fail No visible turbidity No visible turbidity No visible turbidity Notes: 1. Bubble points, dew points and critical temperatures, although not required, are provided for informational purposes. Refrigerant data compiled

20、from Refprop 9.1. 2. Recognized chloride level for pass/fail is about 3 ppm. N/A Not Applicable Table 3. Azeotropic Blends (500 Series Refrigerants) and their Allowable Levels of Contaminants Reporting Units R-513A CHARACTERISTICS: Refrigerant Components N/A R-1234yf/134a Nominal Composition % by we

21、ight 56.0/44.0 Allowable Composition % by weight 55.0-57.0/43.0-45.0 Bubble Point1 C 101.3 kPa -29.2 Dew Point1 C 101.3 kPa -29.1 Critical Temperature1 C 96.5 VAPOR PHASE CONTAMINANTS: Air and Other Non-condensables, Maximum % by volume 25.0C 1.5 LIQUID PHASE CONTAMINANTS: Water, Maximum ppm by weig

22、ht 10 All Other Volatile Impurities, Maximum % by weight 0.5 High Boiling Residue, Maximum % by volume or % by weight 0.01 Particulates/Solids Pass or Fail Visually clean Acidity, Maximum ppm by weight (as HCl) 1 Chloride2 Pass or Fail No visible turbidity Notes: 1. Bubble points, dew points and cri

23、tical temperatures, although not required, are provided for informational purposes. Refrigerant data compiled from Refprop 9.1. 2. Recognized chloride level for pass/fail is about 3 ppm. N/A Not Applicable Price $10.00 (M) $20.00 (NM) Copyright 2015, by Air-Conditioning, Heating, and Refrigeration I

24、nstitute Printed in U.S.A. Registered United States Patent and Trademark Office Note: This standard supersedes AHRI Standard 700-2014. AHRI CERTIFICATION PROGRAM PROVISIONS Scope of the Certification Programs The Reclaimed Refrigerant and Refrigerant Testing Laboratory Certification Programs are bas

25、ed on this standard. The Reclaimed Refrigerant Certification Program includes purity specifications for reclaimed refrigerants. The Refrigerant Testing Laboratory Certification Program includes verification for refrigerant testing laboratories that perform testing of refrigerants to AHRI Standard 70

26、0. Certified Ratings The following ratings are verified by test for the Reclaimed Refrigerant Certification Program: a. Water (ppm by weight) b. Chloride (pass/fail) c. Acidity (ppm by weight) d. High boiling residue (% by volume or % by weight) e. Particulates/solids (pass/fail) f. Air and other no

27、n-condensables (% by volume) g. All other volatile impurities (% by weight) h. Halogenated unsaturated volatile impurities (ppm by weight) The following contaminants are verified by test for the Refrigerant Testing Laboratory Certification Program: a. Water (ppm by weight) b. High boiling residue (%

28、 by volume or % by weight) c. Air and other non-condensables (% by volume) d. All other volatile impurities (% by weight) TABLE OF CONTENTS IMPORTANT SAFETY DISCLAIMER AHRI does not set safety standards and does not certify or guarantee the safety of any products, components or systems designed, tes

29、ted, rated, installed or operated in accordance with this standard/guideline. It is strongly recommended that products be designed, constructed, assembled, installed and operated in accordance with nationally recognized safety standards and code requirements appropriate for products covered by this

30、standard/guideline. AHRI uses its best efforts to develop standards/guidelines employing state-of-the-art and accepted industry practices. AHRI does not certify or guarantee that any tests conducted under its standards/guidelines will be non-hazardous or free from risk. SECTION PAGE Section 1. Purpo

31、se . 1 Section 2. Scope 1 Section 3. Definitions 1 Section 4. Characterization of Refrigerants and Contaminants . 2 Section 5. Sampling and Summary of Test Procedures 2 Section 6. Reporting Procedure . 5 Section 7. Conformance Conditions 6 TABLES Table 1A. Single Component Fluorocarbon Refrigerants

32、and their Allowable Levels of Contaminants . 7 Table 1B. Single Component Hydrocarbon Refrigerants and their Allowable Levels of Contaminants . 10 Table 1C. Carbon Dioxide Refrigerant and its Allowable Levels of Contaminants . 11 Table 2A. Zeotropic Blends (400 Series Refrigerants) and their Allowab

33、le Levels of Contaminants 12 Table 2B. Hydrocarbon Blends (400 R-12; R-13; R-22; R-23; R-32; R-113; R-114; R-115; R-116; R-123; R-124; R-125; R-134a; R-141b; R-142b; R-143a; R-152a; R-218; R-227ea; R-236fa; R-245fa; R-1233zd(E); R-1234yf; R-1234ze(E); and R-1336mzz(Z) 2.1.2 Single Component Hydrocar

34、bon Refrigerants: R-50; R-170; R-E170; R-290; R-600; R-600a; R-601; R-601a; R-610; R-1150; and R-1270 2.1.3 Carbon Dioxide Refrigerant: R-744 2.1.4 Zeotropic Blend Refrigerants: R-401A; R-401B; R-402A; R-402B; R-403A; R-403B; R-404A; R-405A; R-406A; R-407A; R-407B; R-407C; R-407D; R-407E; R-407F; R-

35、408A; R-409A; R-409B; R-410A; R-410B; R-411A; R-411B; R-412A; R-413A; R-414A; R-414B; R-415A; R-415B; R-416A; R-417A; R-417B; R-417C; R-418A; R-419A; R-419B; R-420A; R-421A; R-421B; R-422A; R-422B; R-422C; R-422D; R-422E; R-423A; R-424A; R-425A; R-426A; R-427A; R-428A; R-429A; 430A; R-431A; R-434A;

36、R-435A; R-437A; R-438A; R-439A; R-440A; R-442A; R-444A; R-444B; R-445A; R-446A; R-447A; R-448A; R-449A; R-449B; R-450A; R-451A; R-451B; R-452A; R-453A; R-454A; and R-454B 2.1.5 Zeotropic Hydrocarbon Blend Refrigerants: R-432A; R-433A; R-433B; R-433C; R-436A; R-436B; R-441A; and R-443A 2.1.6 Azeotrop

37、ic Blend Refrigerants: R-500; R-502; R-503; R-507A; R-508A; R-508B; R-509A; R-510A; R-511A; R-512A; and R-513A. Section 3. Definitions All terms in this document will follow the standard industry definitions in the ASHRAE Terminology website (https:/www.ashrae.org/resources-publications/free-resourc

38、es/ashrae-terminology) unless otherwise defined in this section. 3.1 “Shall” or “Should”. “Shall” or “should” shall be interpreted as follows: 3.1.1 Shall. Where “shall” or “shall not” is used for a provision specified, that provision is mandatory if compliance with the standard is claimed. 3.1.2 Sh

39、ould. “Should” is used to indicate provisions which are not mandatory but which are desirable as good practice. AHRI STANDARD 700-2015 2 Section 4. Characterization of Refrigerants and Contaminants 4.1 Characterization. Characterization of single component fluorocarbon (Table 1A) and zeotropic/azeot

40、ropic blend (Table 2A/3) refrigerants and contaminants are listed in the following general classifications: 4.1.1 Isomer content (see Table 1A) 4.1.2 Air and other non-condensables (see Tables 1A, 2A, 3) 4.1.3 Water (see Tables 1A, 2A, 3) 4.1.4 All other volatile impurities (see Tables 1A, 2A, 3) 4.

41、1.5 High boiling residue (see Tables 1A, 2A, 3) 4.1.6 Halogenated unsaturated volatile impurities (see Table 1A) 4.1.7 Particulates/solids (see Tables 1A, 2A, 3) 4.1.8 Acidity (see Tables 1A, 2A, 3) 4.1.9 Chloride (see Tables 1A, 2A, 3) 4.2 Hydrocarbon Characterization. Characterization of hydrocarb

42、on refrigerants (Tables 1B and 2B) and contaminants are listed in the following general classifications: 4.2.1 Nominal composition 4.2.2 Other allowable impurities 4.2.3 Air and other non-condensables 4.2.4 Sulfur odor 4.2.5 High boiling residue 4.2.6 Particulates/solids 4.2.7 Acidity 4.2.8 Water 4.

43、2.9 All other volatile impurities 4.2.10 Total C3, C4 and C5 polyolefins 4.3 Carbon Dioxide Characterization. Characterization of carbon dioxide (Table 1C) and its contaminants are listed in the following general classifications: 4.3.1 Purity 4.3.2 Air and other non-condensables 4.3.3 Water 4.3.4 Hi

44、gh boiling residue 4.3.5 Particulates/solids Section 5. Sampling and Summary of Test Procedures 5.1 Referee Test. The referee test methods for the various contaminants are summarized in the following paragraphs. Detailed test procedures are included in Appendix C to AHRI Standard 700. If alternative

45、 test methods are employed, the user shall be able to demonstrate that they produce results at least equivalent to the specified referee test method. 5.2 Refrigerant Sampling. 5.2.1 Sampling Precautions. Special precautions should be taken to ensure that representative samples are obtained for analy

46、sis. Sampling shall be done by qualified personnel following accepted sampling and safety procedures. Refrigerants with critical temperatures near or below ambient temperature cannot be reliably sampled for both liquid and vapor phase without special handling. Note: Flammable refrigerants which are

47、ASHRAE 34 Class 2L, 2 or 3 present additional safety challenges and require additional measures for sampling safety procedures compared to nonflammable halocarbons documented in this standard. AHRI STANDARD 700-2015 3 5.2.2 Cylinder Preparation. Place a clean, empty sample cylinder with the valve op

48、en in an oven at 110C for one hour. Remove it from the oven while hot, immediately connect it to an evacuation system and evacuate it to less than 56 kPa. Close the valve and allow it to cool. Weigh the empty cylinder. 5.2.3 Vapor Phase Sampling. A vapor phase sample shall be obtained for determinin

49、g the non-condensables. The source temperature shall be measured and recorded at the time the sample is taken. 5.2.3.1 Special Handling for Low Critical Temperature Refrigerant. A vapor phase sample is required to determine non-condensables and volatile impurities, including other refrigerants. The vapor phase sample is obtained by regulating the sample container temperature to 5 K or more above the refrigerant critical temperature. 5.2.3.2 Handling for Liquid Refrigerants with Boiling Points Near or Above Ro