AIR FORCE A-A-59929-2013 Generator Signal.pdf

1、 Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any data that may improve this document should be sent to: WR-ALC/404 SCMS/GUEEA, Robins AFB GA 31098-1670. Since contact information can change, you may want to verify the currency of this address information usin

2、g the ASSIST Online database at https:/assist.dla.mil . AMSC N/A FSC 6625 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. . A-A-59929 07 JULY 2013 COMMERCIAL ITEM DESCRIPTION Generator, Signal The General Services Administration has authorized the use of this Commer

3、cial Item Description as a replacement for PD13WRGUEEA12 for all federal agencies. 1. SCOPE 1.1 Scope. This Signal Generator generates a highly stable continuous wave and modulated signal. The unit is capable of generating Amplitude Modulation (AM), Frequency Modulation (FM), Phase Modulation (M) an

4、d Pulse Modulation (PM) with internal and external signals for modulation. This instrument provides signals for, the development, calibration, repair and maintenance of navigational aids, satellite and other communications equipment. 2. CLASSIFICATION 2.1 Classification. The test set covered by this

5、 CID shall be commercially available equipment that has factory installed options and/or may be modified to the extent necessary to meet the following description. The test set shall be Class 3, in accordance with MIL-PRF-28800. Class 3 equipment is designed for operational environments where condit

6、ions are routinely encountered in a diverse, controlled climate. Examples include test equipment for bench-top, rack-mount and occasional portable use in diverse, environmentally controlled locations. 3. SALIENT CHARACTERISTICS 3.1. Item Description. Signal Generator for Microwave Radio Frequency. 3

7、.2. Radio Frequency Characteristics. The requirement for the Signal Generator is to generate a signal with a span from 100 kHz to 2.5 GHz. The signal generator shall have an RF sweep INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-5992

8、9 2 function. This signal generator shall provide RF output with AM, FM, PM, M and have external modulation capability. The signal generator shall have external pulsed carrier function capability. The signal generator shall have at least 8 marker frequencies. 3.3. Radio Frequency Resolution. The sig

9、nal generator frequency resolution shall be better than 0.001 Hz in in constant wave (CW) with a 10 MHz internal frequency reference. 3.4. Concurrent Modulation. The signal generator shall be capable of generating an output signal with simultaneous FM, AM and Phase modulation content in pulse modula

10、ted intervals. 3.5. Pulse Modulation. The signal generator shall be capable of providing pulse modulation durations equal to or less than 1 microsecond (1S) with a repetition frequency equal or greater than 50 kHz. 3.6. RF Spectral Purity. The signal generator shall have a minimum of 60dB and 90dB a

11、verage harmonic noise content throughout the spectrum while under modulation. 3.7. Sweep Functions. The signal generator shall be capable of performing linear, logarithmic, continuous step frequency sweeps and list sweep in less than 100 seconds and with less than 10 dB variation in output level. 3.

12、8. Marker Frequencies. The signal generator shall have the capability to provide at least two marker frequencies (points). These can be entered manually through the user menu or the GPIB. 3.9. Frequency Accuracy. The frequency accuracy internal reference frequency aging shall be 3.0X10-8 /Year or le

13、ss than 0.5 % at maximum sweep time, see table 1. Table 1 Spectral Purity Content from Center Frequency F0 (dBc/Hz) Frequency Range (MHz) 0.01 to 119.9 120 to 159.9 160 to 319.9 320 to 639.9 640 to 1279.9 1280 to 3000 Content in dBc/Hz Content in dBc/Hz Content in dBc/Hz Content in dBc/Hz Content in

14、 dBc/Hz Content in dBc/Hz 1 Hz 65 66 60 54 48 42 10 Hz 95 96 90 84 78 72 100 Hz 110 115 109 103 97 92 1 kHz 120 129 124 118 112 106 3 kHz 120 129 124 118 112 106 5 kHz 125 131 126 120 114 108 10 kHz 130 142 136 131 124 118 100kHz 130 142 136 131 124 118 Provided by IHSNot for ResaleNo reproduction o

15、r networking permitted without license from IHS-,-,-A-A-59929 3 3.10. Spurious Signals. The total spurious signal content, including side bands b) meet appropriate performance standards, or c) at a reasonable price. The prime contractor is responsible for ensuring that all subcontractors comply with

16、 this requirement. 5. PRODUCT CONFORMANCE PROVISIONS 5.1. Contractor certification. The contractor shall certify and maintain substantiating evidence that the product offered meets the salient characteristics of this commercial item description, and the product conforms to the producers engineering

17、drawings, specifications, standards, and quality assurance practices. The government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract 6. PACKAGING. Preservation, packing, and marking s

18、hall be as specified in the contract or order. 7. NOTES. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59929 8 7.1 Source of documents. 7.1.1 Military Specifications, Standards, and Handbooks referenced herein may be obtained at https:/assist.d

19、la.mil/ or available from the Standardization Documents Order Desk, 700 Robbins Ave, Bldg 4, Section D, Philadelphia, PA 19111-5094 7.1.2 ANSI/EIA documents can be obtained online at http:/www.eciaonline.org/eiastandards or TechAmerica, 601 Pennsylvania Avenue, NW North Building, Suite 600, Washingt

20、on, DC 20004. 7.1.3 IEC documents can be obtained online at http:/www.iec.ch/ or IEC Regional Centre for North America, 446 Main Street, 16thFloor, Worcester, MA 01608. 7.1.4 ISO documents can be obtained online at http:/www.iso.org/ or American National Standards Institute, 1889 L St. NW, Washingto

21、n, DC 20036. 7.1.5 IEEE documents can be obtained online at http:/standards.ieee.org/ or IEEE Operations Center, Hoes Lane, 3rdFloor, Piscataway, NJ 08855. 7.1.6 UL documents can be obtained at http:/ 7.1.7 FCC documents can be obtained at http:/www.fcc.gov/ or Federal Communications Commission, 445

22、 12thStreet, SW, Washington, DC 20554 7.1.8 FAR the FAR may be obtained from the Superintendent of Documents, P.O. Box 371954, Pittsburgh PA 15250-7954. Electronic copies of the FAR may be obtained from https:/www.acquisition.gov/far/index.html 7.2 Key Words Frequency Calibration Modulation Custodia

23、ns: Preparing Activity: Air Force- 84 Air Force-84 Reviewers: Agent: Air Force-99 Air Force- 99 (Project number 6625-2013-041) Note: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil/ Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-