AIR FORCE MIL-B-1107 G-1986 BELT INDIVIDUAL EQUIPMENT M-1936《M-1936个人装备皮带》.pdf

1、MIL-B-3307G 84 m 7777706 0373758 8 W MIL-B-1107G 27 NOVEMBER 1986 SUPERSEDING MIL-B-1107F 23 Aug 1972 MILITARY SPECIFICATION BELT, INDIVIDUAL EQUIPMENT, M-1936 This specification is approved for use by all Depart- ments and Agencies of the Department of Defense. 1. SCOPE 1.1 Scope. This specificatio

2、n covers an adjustable belt, in one type and size, made of cotton webbing. 1.2 Classification. The individual belts shall be of the following classes as specified (see 6.2): Class 1 - Olive drab Class 2 - White 2. APPLICABLE DOCUMENTS 2.1 Government documents. * 2.1.1 Specifications and standards. T

3、he following specifications and standards form a part of this specification to the extent specified herein. Unless otherwise specified, the issues of these documents shall be those listed in the issue of the Department of Defense Index of Specification and Standards (DODISS) and supplement thereto,

4、cited in the solicitation. SPECIFICATIONS FEDERAL V-T-285 NN-P-7 1 UU-P-26 8 DDD-L-20 PPP-B-6 36 Thread Polyester Pallet, Material Handling, Wood, Stringent Con- struction, 2-Way and 4-Way (Partial). Paper, Kraft, Wrapping. Label for Clothing, Equipage, and Tentage, (General Use). Box, Shipping, Fib

5、erboard. Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be-addressed to: the Engineering Division, San Antonio Air Logistics Center/MMEDO, Kelly AFB, Proposal (DD Form 1426) appearing at the end of this documen

6、t or by letter. AMSC NIA i _f FSC 8465 DISTRIBUTION STATEM!SNT A. Approved for public release; distribution is unlimited, TX 78241-5000 by using the self-addressed Standardization Document Improvement * fl THIS DOCUMENT CONTAINS 11 PAGES. I - / Provided by IHSNot for ResaleNo reproduction or network

7、ing permitted without license from IHS-,-,-MIL-B-LL07G BL( W 4777706 0373957 T W MIL-B-1107G MIL I TAY MIL-P-130. MIL-F-411 MIL-W-5 30 MIL-H-9890 MIL-F-10884 MIL-E-2065 2 . * MIL-E-20652/1 STANDARDS FEDERAL FED-STD-751 MILITARY MIL-STD-105 MIL-STD-129 .k MIL-STD-147 * MIL-STD- 794 DRAWINGS Pallet, M

8、aterial Handling, Wood, Post Construction, burrs or sharp edges; failing to serve intended purpose, finish omitted; corroded areas Not as specified, finish not adherent or peeling Not securely clinched or clinched excessively tight, cutting the webbing surf ace Hook portion on end fastenings insuffi

9、- ciently or excessively bent failing to engage center eyelets or to keep fasteners in hooked position fastening fastening Edge of webbing extending beyond end of Webbing not inserted full depth of Fails to slide through when force is Tongue end not securely bent down, applied at location of eyelets

10、 resulting in disengagement of keeper or causing injury in handling Male or female fastener set in reversed position failing to effect a smooth and secure fastening of belt difficulty in securely engaging male and female fasteners Any defect of belt fastener causing NOTE: The male and female belt fa

11、s- teners of each belt in the sample shall be examined to determine whether the fasteners effect a smooth and secure engagement lassi :a j or X X X - X X X X X X X x: X 6 , *. . Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-B-LLO7G EIL( m 97999

12、06 03717b4 3 m MIL-B-1107G ;xamine iomponent s and as semb 1 y ieams and stitching: Open seams tunoffs (see open seams) Seam and stitch type Stitch tension Stitches per inch Stitching margins Stitching ends Thread breaks Box stitching Marking “U. S. I and Cleanness identification )efeat my component

13、 part or required operation omitted (unless otherwise classified herein). One-half inch or less More than 1/2 inch NOTE: A seam shall be considered open when one or more stitches joining a seam are broken or when two or more continuous skipped stitches or run- offs occur, Wrong seam or stitch type L

14、oose, resulting in a loosely exposed bobbin or top thread, tight, result- ing in excessive tightness of webbing on seams specified mum specified mum specified One to two stitches less than minimum Three or more stitches less than mini- One or more stitches in excess of maxi- Under or over specified

15、width by more than 1/16 inch Not backstitched as specified Backstitched less than 1 inch NOTE: Thread breaks not backstitched shall be classified as open seams. Any row of box stitching not stitched through turnunder, i.e., through three plies of webbing omitted than 1/16 inch Any required row or bo

16、x stitching Less than specified length by more Omitted, illegible, incorrect,misplace or size of character not as specified Spots or stains not removable: Seriously affecting appearance Affecting appearance but not seriously Thread ends not trimmed throughout lassi ajor X X X X X X X X .cation Minor

17、 X X X X X X X X X X Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-B-LL07G 84 W 779790b 0373965 5 W MIL-B-1107G 4.4.4 Examination of packaging ,requirements, An examination shall be made to determine that packaging, packing and marking requirem

18、ents of Section 5 of this specification are complied with. with the list below. The sample unit shall be ,one shipping container fully prepared for delivery. shipping containers fully prepared for delivery. Defects of closure listed below shall be examined on shipping containers in the end item insp

19、ection lot. The inspection level shall be S-2 and the AQL shall be 2.5 defects per 100 units of MIL-STD-105. Defects.shal1 be scored in accordance Defects of closure listed below shall be examined on Examine Marking (exterior and interior) Ma ter ia1 s Wor kmans h ip Content Defect mitted, incorrect

20、, illegible, of improper size, locatio. sequence or method of application. Any component missing. Any component damaged, affecting serviceability. Inadequate application of components, such as incomplete closure of container flaps, loose strapping, inadequate stapling, improper taping Bulging or dis

21、tortion of containers. Number of bundles per shipping container is more or less than required. Number of belts per bundle is more or less than required. i/ - l/ For this defect, 2 bundles from each shipping container in the sample shall be examined. J; 5, PACKAGING . Packaging shall be level A, C or

22、 Commercial as specified (see 6.2 5.1.1 Level A. Each belt shall be adjusted to a length of 32 inches and then folded in half lengthwise to approximately 16 inches with the “U.S.“ facing out. good commercial tissue before stacking and tying into bundles. belts shall be neatly stacked one on top of t

23、he other with fasteners alter- nately reversed and securely tied at each end with cotton tape or twine. The tied bundle placed on edge shall approximate 16 inches in length, 7 inches in width, and 2 314 inches in depth. When packaging white belts, wrap each belt individually in Ten folded J; 5.1.2 L

24、evel C. The level C preservation for belts shall conform to the MIL-STD-794 requirements for this level. J; 5.1.3 Commercial. Belts shall be packaged in accordance with the appli- cable requirements of ASTM D 3951. 8 Provided by IHSNot for ResaleNo reproduction or networking permitted without licens

25、e from IHS-,-,-MIL-B-LL07G 8L( MIL-B-1107G Ob 03717bb 7 M . Packing shall be level A, B, or Commercial as specified (see 6.2 5.2.1 Level A. One hundred belts, packaged as specified in 5.1, shall be packed in a fiberboard shipping container conforming to VS, style RSC-L of PPP-B-636. The inside of ea

26、ch container shall be fitted with a taped liner conforming to V3c of PPP-B-636. in length, two in width, and five in depth within a shipping container. In- side dimensions of the shipping container shall approximate 16 1/2 inches in length, 14 1/2 inches in width, and 13 3/4 inches in depth. Approxi

27、mate dimensions are furnished as a guide only. the contents completely covered on the top and bottom with a sheet of 30 pound minimum basis weight kraft paper conforming to grade B of UU-P-268. Each shipping container shall be closed waterproofed and reinforced with flat strapping or tape banding in

28、 accordance with the appendix of the container specification. Level A packages shall be packed on edge one Each shipping container shall have 5.2.2 Level B. One hundred belts, packaged as specified in 5.1, shall be packed in a fiberboard shipping container conforming to type CF or SF, variety SW, cl

29、ass domestic, grade 275 of PPP-B-636. The inside of each shipping con- tainer shall be fitted with a taped liner conforming to type CF, variety SW, grade 275 of PPP-B-636. approximate 16 1/2 inches in length, 14 1/2 inches in width, and 13 3/4 inches in depth. Each shipping container shall have the

30、contents completely covered on the top and bottom with a sheet of 30 pound minimum basis weight kraft paper conforming to grade B of UU-P-268. Each container shall be closed in accordance with method II in the appendix of the container specification. Inside dimensions of the shipping container shall

31、 Approximate dimensions are furnished as a guide only. 5.2.2.1 When specified, shipping containers shall be fabricated from V3c or V3s fiberboard (see 6.2). * 5.2.3 Level (3. The level C packing for belts shall conform to the MIL-STD-794 requirement for this level. * 5.2.4 Comercial. The preserved b

32、elts shall be packed in accordance with the applicable requirements of ASTM D 3951. * 5.3 Marking. In addition to any special marking required by the contract or order.(see 6.2), each unit pack, intermediate and exterior container and unitized load shall be marked in accordance with MIL-STD-129 or A

33、STM D 3951 as applicable. 5.4 Palletization. When specified (see 6.2), items packed as specified in 5.2 shall be palletized on a type I (4-way entry), type IV, or type V pallet in accordance with load type I or Ia of MIL-STD-147. 4-way, type IV; type V, class 1, size 2; or type VIiI, fabricated from

34、 wood groups I, II, III, or IV, grade A of.“-P-71, gr the pallet shall be 4-way, type I, style lA, or lB, size A, class 1, fabricated from wood group specified-, of MIL-P-15011. bonding or film bonding means specified in MIL-STD-147. shall be in accordance with the appendix of MIL-STD-147. shall be

35、effected by reversing the pattern of each course. of a size which does not conform to any of the patterns specified in MIL-STD-147, the pallet pattern used shall be approved by the contracting officer . The .pallet shall be Each prepared load shall be bynded with the applicable strap The pallet patt

36、ern Interlocking of loads If the container is 9 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-B-LL07G Ll W 777770b 03717b7 7 MIL-B-1107G 6.1 Intended use. The belt covered by this specification is worn primarily by military personnel armed with

37、 a pistol or carbine and is used to carry various items of individual equipment such as .45 caliber pistol holster; M1923, enlisted mens ammunition magazine pocket; .30 caliber, M-1 carbine or rifle ammunition magazine pocket; 30 round carbine magazine pocket; M-1942, first packet pouch; M-1910, dis

38、mounted canteen cover, which are attached to the belt by means of either belt loops or a double hook. Eyelets spaced to accommodate a double hook are provided along the bottom edge of the belt while other eyelets are located along the top edge of the belt loops or a double Eyelets spaced to accommod

39、ate a double hook are provided along the bottom edge of the belt while other eyelets are located along the top edge of the belt so that when wearing the cargo and combat field pack suspenders, the suspender snaps can be attached to these eyelets and the suspenders used to help support the weight of

40、the belt and its attached equipment. hook. * 6.2 Ordering data. 6.2.1 Acquisition requirements. Acquisition documents should specify the following: a. b. Title, number and date of this specification. When first article sample is required (see 3.1, 4.3 and 6.5). C. Selection of applicable levels of p

41、ackaging and packing (see 5.1 and 5.2). d. Color required (see 1.2). e. Whether V-board containers are required for level B shipments (see 5.2.2.1). * f. When palletization is required (see 5.4). 6.3 For access to a standard shade sample of webbing and a standard,sample of thread, address the procur

42、ing office issuing .the invitation for bids. 6.4 The M-1936 individual equipment belt weighs approximately .57 pound. * 6.5 First article. When a first article inspection is required, the item(s) should beya first article sample. 0ne.uni.t. The contracting officer should include specific instruction

43、s in acquisition documents regarding arrangements for examinations, approval of first article test results and disposition of first articles. bids should provide that the Government reserves the right-to waive the require ments for samples for first article inspection to those bidders offering a pro

44、- duct which has been previously acquired or tested by the Government, and that bidders offering such products, who wish to rely on such production or test, must furnish evidence with the bid that prior Government approval is presently appropriate for the pending contract. The first article should c

45、onsist of Invitations for 10 m Li O O dl Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Custodians: Army - MI Navy - MC Air Force - 99 MIL-B-LL07G 4 9999906 0373968 O MIL-B-1107G * 6.6 Subject term (key word) listing. Belt, adjustable Belt, individu

46、al equipment, M-1936 Belt, fasteners - brass Cot ton, webbing Colors - olive drab and white Eyelets top and bottom edges Military personnel Thread, polyester * 6.7 The margins of this specification are marked with asterisks (or ver- tical lines) to indicate where changes (additions, modifications co

47、rrections, deletions) from the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for.any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irr

48、espective of the marginal notations and relationship to the last previous issue. Preparing activity : Air Force - 82 Review activities: Army - MD Navy - SA DLA - CT User activity: Navy - CG Air Force - 45 (Project 8465-0937) 11 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-