AIR FORCE MIL-B-83665 B-1981 BAG PILOT RELIEF (MALE)《(男式)飞行员救护袋》.pdf

1、MIL-B-83665B - 2 JUNE 1981 SUPERSEDING MIL-B-83665A 13 Dec 1972 MILITARY SPECIFICATION BAG, PILOT RELIEF (MALE) . This specification is approved for use by all Departments and Agencies of the Department of Defense. 1. SCOPE 1.1 Scope. plastic bag suitable for the collection, retenteon, and temporary

2、 storage of urine (see 6.1). This specification covers the requirements for one type of disposable 2. APPLICABLE DOCUMENTS 2.1 Issues of Documents. date of invitation for bids or request for proposal, form a part of the specification to the extent specified herein. The following documents of the iss

3、ue in effect on SPECIFICATIONS Federal L-P-37 5 PPP-B-26 Bag, Plastic, (General Purpose) PPP-B-5 66 PPP-B-636 Box, Shippfng, Fiberboard PPP-B-67 6 Box, Set-up Plastic Film, Flexible, Vinyl Chloride Boxes , Folding, Paperboard Military MIL-P- Preservation-packaging, Methods of Bments (recommendations

4、, additions, deletions) and any pertinent data which may be of use fn improving this document should be addressed to: by using the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. AFALD/PTP, Wright-Patterson Air Force Bas

5、e OH 45433 FS C- 8 10 5 Licensed by Information Handling ServicesMIL-B-83bb5B 81 999990h 0289880 3 W MIL-B-83665B STANDARDS Military MIL-STD-105 MIL-STD-129 MIL-STD-1188 Sampling Procedures and Tables for Inspection by Attribut es Marking for Shipment and Storage Commercial Packaging of Supplies and

6、 Equipment (Copies of specifications, standards, drawings, and publications required by contractors in connection with specific procurement functions should be obtained from the procuring actlvity or as directed by the contracting officer). 3. REQUIREMENTS 3.1 Material. 3.1.1 Recycled and reclaimed

7、materials. Recycled and reclaimed materials may be used if the quality of the product is not impaired. 3.1.2 3. to L-P-375, type IT, class 1, colorless. The bag shall be fabricated from a flexible plastic film conforming 3.1.3 Thickness of film. 6 mils CO. 15 mm) . The wall thickness for the bag sha

8、ll be no less than 3.1.4 Absorbent. cellulose or granular material capable of absorbing 500 cm Bag shall contain an absorbent of eithes sponge type compressed of urine. 3.1.5 Tubing or sheets, Tubing or sheets used shall be clean and free from pinholes, tears, cracks, blisters, creases, nicks, and c

9、uts or other defects which will mpafr its usefulness for the intended purpose. 3.2 Design and construction. 3.2.1 Design. as depicted in figure 1. The opening or neck of the bag shall incorporate means for preventing spillage when bag is inverted and shall not impede flow input. The finished bag sha

10、ll be of flat rectangular configurations . Both sides and one end shall be sealed. 3.2.2 Dimension, The dimensions of the bag shall be as specified in figure 1. 3.2.3 Closure. resistant), 3/8 inch wide (10 mm) band or wfre of equal strength and flexibility imbedded or laminated 2n vinyle plastic to

11、enable ease of folding or rolling in producing a positive closure, of the bag during Pabrication; Closure shall be by means of a 28 gage steel (corrosion The wire or band shall form an integral part 3.2.4 Seams. All seams shall be made by heat (thermal) sealing. - 2 Licensed by Information Handling

12、ServicesNeck Opening (NO) Neck Length (NL) Reservior Width (RW) Reservior Length (RL) I RL I j *I MINIMM I.D. MAXIMUM I.D. MM INCHES MM INCHES 3 3/4 95.3 4 114 3 112 88.9 4 112 114.3 6 114 152.6 6 314 153.1 6 314 153.1 7 114 108 17 8 t CELLULOSE OR GRANULAR MTL. MINIMUM 50.0 CM3 OF URINE CAPABLE OF

13、ABSORBING FIGURE 1. Configurations and dimensions of bags. 3 Licensed by Information Handling ServicesMIL-B-3bbSB 81 9999906 0269882 7 = MTL-B-83665B 3.2.5 Directions for use. after use shall be printed on one side of bag or on a card which will be inserted in neck opening. Brief instructions for op

14、ening of bag and closure 3.3 Workmanship. The bag shall be uniformly constructed. The bag shall be easy to open for immediate use. The finished product shall conform to the requirements specified herein and shall be free from defects which detract from its appearance or impair its serviceability. 4.

15、 QUALITY ASSURANCE PROVISIONS 4.1 Responsibility for inspection. Unless otherwise specified in the contract, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract, the contractor may use his own or any othe

16、r facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the Snspectlons set forth in the specification where such inspections are deemed necessary to assure supplies and servi

17、ces conform to prescribed requirements, 4.2 Classification of inspections. specified herein are classified as follows: The inspection and testing of the bags Quality conformance inspection (see 4.4) 4.3 Sampling. accordance with MIL-STD-105. acceptable quality level (AQL) of 10. Sample bags shall be

18、 selected at random from each lot in The inspection level shall be S-1 with an 4.4 Tests. 4.4.1 Examination of product. hereunder and shall be examined to determine conformance with this specification with respect to materials, workmanship, and general requlrements. 3 4.4.2 Inverted leakage test. Th

19、e bag shall be filled with a minaum of 550 cm of wa er and, without closing, quickly inverted. 30 cm Each sample bag shall be tested in sequence There shall be no more than 5 of liquid spilled from the opening uring a one-minute period, 4.4.3 Performance leakage test. opening or top of the bag shall

20、 be closed by rolling or folding down to withSn After completion of test in 4.4.2, the approximately 1/2 inch (13 mn) of the main body of the bag. secure rolled Qr- folded end. flat, smooth level surface. 6 inches by 10 inches (15.2 cm x 25.4 em) and weighing 12 pounds (5,4 kg), shall be placed cent

21、rally on top of the bag. this position for a pertod of one hour, the bag shall show no evidence of leakage. Fold metal tabs to The bag shall be laid in a horizontal position on a A dead weight with smooth edges and comers, After allowing the bag to remain 5n 4 Licensed by Information Handling Servic

22、esMIL-B-83bbSB 81 W 9797906 0289883 7 W - -_ MIL-B-83665B 4.4.4 Drop test. 6 feet (1.8 m), to a smooth, hard surface. seams, closure, or leakage of water. 4.4.5 Packaging inspection. The inspection of the preservation-packaging and interior package marking shall be in accordance with the group A and

23、 B quality conformance inspection requirements of MIL-P-116. the packing and marking for shipment and storage shall be in accordance with the quality assurance provisions of the applicable container specification and the marking requirements of MIL-STD-129. Three consecutive drops shdl be made from

24、a height of There shall be no failure of the The inspection of 5. PACKAGING. 5.1 Preservation-packaging. Packaging shall be level A or Commercial, as specified (see 6.2) . 5.1.1 Level A. 5.1.1.1 Cleaning. 5.1.1.2 Drying. Drying will be by any method that will not adversely affect the material. Clean

25、ing will be in accordance with MIL-P-116, method C-l. 5.1.1.3 Unit packaging. Unless otherwise specified (see 6.2), each bag will be unit packaged in a plastic bag conforming to Type II, Grade A, Style 1 of PPP-B-26. Unit protection shall be method III of MIL-P-116. Closure shall be by heat sealing.

26、 5.1.1.4 Intermediate packaging. Unless otherwise specified (see 6.21, the bags shall be packaged in intermediate containers conforming to specification PPP-B-566 or PPP-B-676. of the container Quantity shall be limited to size and limitations 5.1.2 Commercial. Cleaning, drying, preservation, and pa

27、ckaging shall be in accordance with MIL-STD-1188. 5.2 Packing. Packing shall be level A, B, or Commercial as specified (see 6.2). 5.2.1 Level A. conforming to PPP-B-636, Class Weather-Resistant and closed in accordance with the appendix thereto. Bags packaged as specified in 5.1 shall be packed in a

28、 box 5.2.2 Level B, conforming to.PPP-B-636, Class Domestic. Bags packaged as specified in 5.1 shail be packed in a box 5.2.3 Commercial. accordance with MIL-STD-1188. Bags packaged as specified in 5.1 shall be packed in 5 Licensed by Information Handling Services- - MIL-B-83665B 5.3 Marking. 5.3.1

29、Level A 6 B. or order, unit packages, intermediate packages, and shipping containers shall be marked in accordance with the requirements of MIL-STD-129. In addition to any special marking required by the contract 5.3.2 Commercial. Marking shall be in accordance with MIL-STD-1188. 6. NOTES 6.1 Intend

30、ed use. (but not limited) for use of male personnel in fighter, observation, helicopter, hospital and similar aircraft where built-in relief facilities are not available. The bags procured under this specification are intended 6.2 Ordering data. Procurement documents should specify the following: a.

31、 Title, number, and date of this specificatfon. b. Quantity. Number per unit pack, Intermediate packaging. (see 5.1.1.3, c. Applicable level of packaging (see 5.1). d. Applicable level of packing (see 5.2). 5.1.1.4). 6.3 Storage. Store in a dry, cool place. 6.4 Changes from previous issue. Astericks

32、 are not used in this revision to identify changes with respect to the previous issue, due to the extensiveness of the changes. 6.5 Ordering information. was assigned to the commodity described herein. before ordering. As of the date of t5is revision, NSN 8105-00-922-9469 Purchasers should verify the NSN Cus toian: Air Force - 69 Reviewer : Air Force - 99 User : PREPARING ACTIVITY : Air Force - 69 Project No. : 8105-F280 Army - GL, MD 6 Licensed by Information Handling Services