AIR FORCE MIL-DTL-83133 H-2011 TURBINE FUEL AVIATION KEROSENE TYPE JP-8 (NATO F-34) NATO F-35 and JP-8+100 (NATO F-37)《JP-8 (NATO F-34) NATO F-35和JP-8+100 (NATO F-37)煤油式航空涡轮机燃油》.pdf

1、MIL-DTL-83133H 25 October 2011 SUPERSEDING MIL-DTL-83133G w/ AMENDMENT 1 1 June 2011 DETAIL SPECIFICATION TURBINE FUEL, AVIATION, KEROSENE TYPE, JP-8 (NATO F-34), NATO F-35, and JP-8+100 (NATO F-37) AMSC N/A FSC 9130 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. M

2、ETRIC Comments, suggestions, or questions on this document should be addressed to AFPA/PTPT, 2430 C Street, Bldg 70, Area B, Wright-Patterson AFB OH 45433-7632 or e-mailed to AFPET.AFTTwpafb.af.mil. Since contact information can change, you may want to verify the currency of this address information

3、 using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83133H 2 This specification is approved for use by all Departments and Agencies of the Department of Defense. 1. SCOPE 1.1 Scope1

4、.2 . This specification covers three grades of kerosene type aviation turbine fuel, JP-8 (NATO F-34), NATO F-35, and JP-8+100 (NATO F-37). This specification was thoroughly reviewed as a part of acquisition reform. While most of the requirements were converted to performance terms, due to the milita

5、ry-unique nature of the product (see 6.1) and the need for compatibility with deployed systems, it was determined that not all requirements could be converted. The issuance of this specification as “detail“ is not intended to constrain technology advances in future systems. ClassificationGrade . Avi

6、ation turbine fuel will be of the following grades, as specified (see 6.2). NATO Code No. Description JP-8 F-34 Kerosene type turbine fuel which will contain a static dissipater additive, corrosion inhibitor/lubricity improver, and fuel system icing inhibitor, and may contain antioxidant and metal d

7、eactivator. - F-35 Kerosene type turbine fuel which will contain a static dissipater additive, may contain antioxidant, corrosion inhibitor/lubricity improver, and metal deactivator but will not contain fuel system icing inhibitor. JP-8+100 F-37 JP-8 type kerosene turbine fuel which contains thermal

8、 stability improver additive (NATO S-1749) as described in 3.3.6. 2. APPLICABLE DOCUMENTS 2.1 General2.2 . The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This section does not include documents cited in other sections of this specification or recomme

9、nded for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this specification, whether or not they are listed. Gover

10、nment documents2.2.1 . Specifications, standards, and handbooksAIR AND SPACE INTEROPERABILITY COUNCIL (ASIC) . The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited

11、 in the solicitation or contract. AIR STD ACS (FG) 4022 Guide Specifications (Minimum Quality Standards) for Aviation Turbine Fuels: F-34, F-35, F-40, and F-44 AIR STD 15/09 Interchangeability Chart of Standardized Aviation Fuels, Lubricants, and Associated Products (Copies of these documents are av

12、ailable online at http:/www.dtic.mil/asic/index.htm or Defense Technical Information Center 8725 John J. Kingman Road, Suite 0944, Fort Belvoir, VA 22060-6218.) Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83133H 3 NORTH ATLANTIC TREATY OR

13、GANIZATION (NATO) STANAG 1135 Interchangeability of Fuels, Lubricants, and Associated Products Used by the Armed Forces of the North Atlantic Treaty Nations STANAG 3747 Guide Specifications (Minimum Quality Standards) for Aviation Turbine Fuels (F-34, F-35, F-40, and F-44) (Copies of these documents

14、 are available from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia PA 19111-5094 or online at https:/assist.daps.dla.mil or https:/assist.daps.dla.mil/quicksearch.) DEPARTMENT OF DEFENSE SPECIFICATIONS MIL-PRF-25017 Inhibitor, Corrosion/Lubricity Improver, Fue

15、l Soluble (NATO S-1747) MIL-DTL-85470 Inhibitor, Icing, Fuel System, High Flash NATO Code Number S-1745 DEPARTMENT OF DEFENSE STANDARDS MIL-STD-290 Packaging of Petroleum and Related Products QUALIFIED PRODUCTS LIST QPL-25017 Inhibitor, Corrosion/Lubricity Improver, Fuel Soluble (NATO S-1747) (Copie

16、s of these documents are available from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia PA 19111-5094 or online at https:/assist.daps.dla.mil or https:/assist.daps.dla.mil/quicksearch.) 2.3 Non-government publicationsASTM INTERNATIONAL . The following documents

17、 form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract. ASTM D56 Standard Test Method for Flash Point by Tag Closed Cup Tester (DoD Adopted) ASTM D86 Standard Test Method for Distillation

18、 of Petroleum Products at Atmospheric Pressure (DoD Adopted) ASTM D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester (DoD Adopted) ASTM D129 Standard Test Method for Sulfur in Petroleum Products (General Bomb Method) (DoD Adopted) ASTM D130 Standard Test Method for Corrosi

19、veness to Copper from Petroleum Products by Copper Strip Test (DoD Adopted) ASTM D156 Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method) (DoD Adopted) Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-8313

20、3H 4 ASTM D381 Standard Test Method for Gum Content in Fuels by Jet Evaporation (DoD Adopted) ASTM D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and the Calculation of Dynamic Viscosity) (DoD Adopted) ASTM D976 Standard Test Method for Calculated Cetane Index o

21、f Distillate Fuels (DoD Adopted) ASTM D1094 Standard Test Method for Water Reaction of Aviation Fuels (DoD Adopted) ASTM D1266 Standard Test Method for Sulfur in Petroleum Products (Lamp Method) (DoD Adopted) ASTM D1298 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gr

22、avity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method (DoD Adopted) ASTM D1319 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption (DoD Adopted) ASTM D1322 Standard Test Method for Smoke Point of Kerosine and Aviation Turb

23、ine Fuel (DoD Adopted) ASTM D1655 Standard Specification for Aviation Turbine Fuels (DoD Adopted) ASTM D1840 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry (DoD Adopted) ASTM D2276 Standard Test Method for Particulate Contaminant in Aviat

24、ion Fuel by Line Sampling (DoD Adopted) ASTM D2386 Standard Test Method for Freezing Point of Aviation Fuels (DoD Adopted) ASTM D2425 Standard Test Method for Hydrocarbon Types in Middle Distillates by Mass Spectrometry ASTM D2622 Standard Test Method for Sulfur in Petroleum Products by Wavelength D

25、ispersive X-Ray Fluorescence Spectrometry (DoD Adopted) ASTM D2624 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels (DoD Adopted) ASTM D2887 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography (DoD Adopted) ASTM D3120 Sta

26、ndard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry (DoD Adopted) ASTM D3227 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method) (DoD Adopted) ASTM D32

27、41 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (DoD Adopted) ASTM D3242 Standard Test Method for Acidity in Aviation Turbine Fuel (DoD Adopted) ASTM D3338 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels (DoD Adopted) Provided by IHSN

28、ot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83133H 5 ASTM D3343 Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels (DoD Adopted) ASTM D3701 Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nucle

29、ar Magnetic Resonance Spectrometry (DoD Adopted) ASTM D3828 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester (DoD Adopted) ASTM D3948 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer (DoD Adopted) ASTM D4052

30、 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter (DoD Adopted) ASTM D4057 Standard Practice for Manual Sampling of Petroleum and Petroleum Products (DoD Adopted) ASTM D4177 Standard Practice for Automatic Sampling of Petroleum and Petroleum Pro

31、ducts (DoD Adopted) ASTM D4294 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectrometry (DoD Adopted) ASTM D4306 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination (DoD Adopted) ASTM D4529 St

32、andard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels ASTM D4629 Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection (DoD Adopted) ASTM D4737 Standard Test Method for Calculated Cetane

33、Index by Four Variable Equation ASTM D4809 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method) (DoD Adopted) ASTM D4952 Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test) (DoD Adopted)

34、 ASTM D5006 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels (DoD Adopted) ASTM D5291 Standard Test Method for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants ASTM D5452 Standard Test Method for Part

35、iculate Contamination in Aviation Fuels by Laboratory Filtration (DoD Adopted) ASTM D5453 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence ASTM D5972 Standard Test Method for Freez

36、ing Point of Aviation Fuels (Automatic Phase Transition Method) (DoD Adopted) ASTM D6045 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83133H 6 ASTM D6

37、304 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration (DoD Adopted) ASTM D6890 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Co

38、nstant Volume Chamber ASTM D7153 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method) ASTM D7154 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method) ASTM D7170 Standard Test Method for Determination of Derived Cetane Number (DCN) o

39、f Diesel Fuel OilsFixed Range Injection Period, Constant Volume Combustion Chamber Method ASTM D7224 Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer ASTM D7359 Standard Test Method for Total Fl

40、uorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC) ASTM E29 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specification

41、s (DoD Adopted) IEEE/ASTM SI10 American National Standard for Metric Practice (DoD Adopted) (Copies of these documents are available at ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken PA 19428-2959. Electronic copies of ASTM standards may be obtained from http:/www.astm.org

42、.) UNIVERSAL OIL PRODUCTS UOP 389 Trace Metals in Organics by Wet Ashing-ICP-OES (Copies of these documents are available at Universal Oil Products, UOP LLC, 25 East Algonquin Road, P.O. Box 5017 Des Plaines, IL 60017. Electronic copies are available through ASTM International at http:/www.astm.org.

43、) ENERGY INSTITUTE IP 170 Determination of Flash Point - Abel Closed-Cup Method IP 540 Determination of the Existent Gum Content of Aviation Turbine Fuel - Jet Evaporation Method IP 564 Determination of the Level of Cleanliness of Aviation Turbine Fuel - Laboratory Automatic Particle Counter Method

44、IP 565 Determination of the Level of Cleanliness of Aviation Turbine Fuels - Portable Automatic Particle Counter Method IP 577 Determination of the Level of Cleanliness of Aviation Turbine Fuel - Automatic Particle Counter Method Using Light Extinction Provided by IHSNot for ResaleNo reproduction or

45、 networking permitted without license from IHS-,-,-MIL-DTL-83133H 7 IP 585 Determination of Fatty Acid Methyl Esters (FAME), Derived from Bio-Diesel Fuel, in Aviation Turbine Fuel - GC-MS with Selective Ion Monitoring/Scan Detection Method IP 590 Determination of Fatty Acid Methyl Esters (FAME) in A

46、viation Turbine Fuel - HPLC Evaporative Light Scattering Detector Method (Copies of these documents are available from the Energy Institute, 61 New Cavendish Street, London, WIG 7AR, UK. Electronic copies of Energy Institute documents may be obtained from http:/www.energyinst.org.uk) 2.4 Order of pr

47、ecedence3. REQUIREMENTS . Unless otherwise noted herein or in the contract, in the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a

48、 specific exemption has been obtained. 3.1 Materials. Unless otherwise specified (see 3.1.1), fuel supplied under this specification shall be refined hydrocarbon distillate fuel oil containing additives in accordance with 3.3. The feedstock from which the fuel is refined shall be crude oils derived

49、from petroleum, tar sands, oil shale, or mixtures thereof. 3.1.1 Synthesized Materials. With the approval of both the procuring activity and the applicable fuel technical authorities listed below, up to a total 50 volume percent of the finished fuel may consist of Synthesized Paraffinic Kerosene (SPK) derived from a Fischer-Tropsch (FT) process meeting the requirements of Appendix A (see A.2) or SPK