AIR FORCE MIL-T-27354 B-1965 TRAINING AID FIRST AID NON-MEDICAL PERSONNEL TAU-41 E《TAU-41 E型非医学人员急救教具》.pdf

1、MIL-T-27354B (USAF 27 October 1965 Superseding MIL-T-2735 Flexible and Extra Flexible, 300 and 600 Volts) Plastic Sheet, Acrylic, Modified Marking for Shipment and Storage Identification Marking of- U. S. Military Property Cushioning, Anchoring, Bracing, Blocking, and Water- proofing, with appropria

2、te Test Methods Connector, Plug, Electrical-with Spring-Loaded Pivoted Grounding Blade, Polerized FSC 6910 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-27354B 69 9999906 0385585 T . MIL-T-273 54B (Usfi Drawing Air Force 5956715 Chest, Medica

3、l Training Kit, Assembly of (Copies of specifications, standards, drawings and publications required by contractors in connection with specific procurement functions should be obtained from the procuring activity or as directed by the contracting officer). 3. REQUIm4E3lTS i 3.1 Preproduction SamDle.

4、 When a preproduction sample is required (see 6.2), it shall meet the requirements of this specification. 3.2 Materials 3.2.1 Fungus-proof Materials. Materials that are nutrients for fungi shall not be used where it is practical to avoid them. treated with a fungicidal agent acceptable to the procur

5、ing activity. When used, they shall be 3.2.2 Specified Quality. The materials shall be as specified herein. When not specifically designated, materials shall be selected in accordance with 3.3. In any case, the materials used shall be sound, of uniform quality and condition, and free from seams, cra

6、cks, or other defects which may adversely affect the appearance, strength, endurance, or wear resistance of the finished part. 3.3 Design and Construction. structed as to enable non-medical personnel to be taught the procedures of first aid care which are vital to sustain life and minimize injury. 3

7、.3.1 Details of Components. listed in Table I. The items shall be assembled within the chest to meet the confi uration shown on Figure 1. outsi% front lid to serve as a display panel. protected from dirt, loosening, tearing, and other forms of damage or deter- ioration by a covering of clear plastic

8、 conforming to MIL-P-8184. shall be molded to fit the outer configuration of the items in such a manner that no undue strain is placed upon the cover attachment points. 3.3.2 Chest. The chest shall conform to Drawing 59J6715. The training aid shall be so designed and con- The training aid shall cons

9、ist of the items Items 19 thru 28 shall be affixed to the The mounted items shall be The plastic 3.3.3 Slide Boxes, The dimensions of each slide box shall be approximately 7-3/4 bm 2-1/8 inches. Each box shall accommodate one hundred and fifty 35 mm slides mounted in standard 2-by 2-inch paperboard-

10、mounts. The boxes shall open from the top The three boxes shall contain (see ?.4.2). and shall be- equipped- with latches and a handle. slots consecutively numbered from 1 through 448 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-HIL-T-2735LIB b7

11、 E 7777706 0385586 I E - i! 3.3.4 Pointer. A 34-inch rubber-tipped blackboard pointer shall be provided; A reflective or luminous material shall be applied along 6 inches of the pointer tip to enhance its visibility under projected light. . TABLE I CONTENTS ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14

12、3UANTITY 1 3 1 1 1 1 1 448 200 200 200 200 1 1 ITEM DESCRIPTION CHEST, MEDICAL TRAINING SET BOX, SLIDE POINTER BULB, PROJECTOR CORD, EXTENSION, 50 FEET LESSON SLIDE BOX MAGNETIC TAPE, INSTRUCTOR BRIEFING 1,800 FEET COLOR SLIDES, 35 MM TEACHING GUIDE FOR AF INSTRUCTORS LESSON PREPARATION FORM HAND RE

13、CEIPT EXAMINATION ANSWER SHEET AFM 160-6-2, INSTRUCTORS GUIDE AFM 50-9, HOW TO INSTRUCT 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-t NIL-T-27354B 67 7777906 0385587 3 . MI L-T-27 3 54B(U SA F) TABLE I (CONWD) ITEM NO. 15 16 17 18 19 20 21 22 2

14、3 24 25 26 27 28 4 iUANTITY 1 26 26 1 1 1 1 1 1 1 1 1 1 1 ITEM DESCRIPTION 4FM 160-34, MEDICAL AIRMANS MANUAL 4FP 35-5-3, FIRST AID FOR AIRMEN 9FM 160-46, MILITARY SANITATION 4FM 355-8, AIRMANS MANUAL FOR DEFENSE AGAINST CBR ATTACK SAFETY PINS, LARGE, CURVED ORTHOPEDIC, CARDOF 12 LUEfRICANT, SURGICA

15、L, 4 OUNCES SODIUM CHLORIDE-SDIUM BICARBONATE MIXTURE, 4.5 GM, 2s COMPRESS, GAUZE, 4 BY 4 INCHES, PACKAGE OF 200 BANDAGE, GAUZE, ROLLER, 4 INCHES BY 10 YARDS COMPRESS AND BANDAGE, FIELD, 18 BY 22 INCHES DRESSING, FIRST AID, FIELD, 4 BY 7 INCHES GAUZE, ABSORBENT, 36 INCHES WIDE BY 5 YARDS WADDING, CO

16、TTON, SURGICAL SHEET, 5 INCHES BY 6 YARDS, PACKAGE OF 12 SPLINT, WIRE, LADDER 3 - 1/2 BY 31 INCHES Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-. -I r MIL-T-27354B 67 B 7777706 0385588 5 - M IL T-.-Zi 3 54E!U SA F) 5 Provided by IHSNot for ResaleN

17、o reproduction or networking permitted without license from IHS-,-,- I MIL-T-273548 69 9999906 0385589 7 . = MIL-T-273 54B (USAF) 3.3.5 Projector Bulb. Number PH/30STlOP-l20V or equal, shall be provided. 3.3 6 Extension Cord. (2/18) SJO 375, conforming to MIL-C-3A32 shall be provided, conforming to

18、MS24.663 shall be attached to one end of the extension cord and a matching female connector attached to the other end. 3.3.7 Lesson Slide Box. The lesson slide box shall consist of a molded plastic tray having a capacity for thirty 35 mm slides mounted in standard 2-by 2-inch cardboard mounts. Conse

19、cutively numbered slots shall be provided within the tray. A projector bulb conforming to General Electric Part A 50-f oot extension cord, designated typs GO-OYIGF A male connector 3.3.8 Magnetic Tape. master tape onto a 1-mil polyester magnetic, designated TAT-A-HT-1800-250 NA, conforming to W-T-00

20、70. Recording shall start 12 inches from the leader joint (36 inches from tape end), and shall be made at a rate of 7-1/2 inches per second. splicing the tape shall be affixad to the inside of the lid of each reel box. 3.3.9 Color Slides. inch paperboard mounts. from which they were made. projector

21、(rear view), the numbers shall appear in the upper right hand corner. The slides shall be stored in the corresponding slot within the boxes. The instructors briefing shall be recorded from the The tape shall have a 24-inch white plastic leader. Instructions or Standard 34 mm color slides shall be pr

22、ovided in 2-by 2- The slides shall be numbered identical to the masters When properly positioned for insertion into the 3.4 Identification of Product. Equipment, assemblies, and parts shall be marked in accordance with MIL-STD-130. 3.4.1 Name plate. legibly filled in with the following information,

23、shall be securely attached to the training aid: A small plastic or metal name plate, permanently and Training Aid, First Aid, Non-Medical Personnel TAU-41IE Specification MIL-T-27354B (USAF) FSN 6910-775-5342 Mfrls part no. -.- Mfrs name or code no. R Contractor or order no, R “Applicable data shall

24、 be entered by the contractor. us Y i 3.4.2 Slide Boxes. The applicable box number shall be marked on the outer front surface of each box, as follows: The outer top surfaces of the boxes shall identify 6 c, Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS

25、-,-,-Box Nr 1 - Slides 1 through 150 Box Nr 2 - Slides 151 through 308 Box Nr 3 - Slides 301 through 448 3.5 Government-Loaned Prmertg. quantities specified in Table 1 as part of the coinglete TAcT-41/E training aid loaned to the contractor from the Government (see 6.2). These items shall be used as

26、 Easters by the contractor to reproduce the actual or dumm3=items as required. The followifig items will be furnished in the (a) Xagnetic tape, instructor briefing , 1800 feet (b) Color slides, 35mm (c) (d) Lesson preparation Form (e) Hand receipt Teaching guide for Air Force instructors ( f) Examin

27、ation answer sheet (g) (h) Lubricant, surgical, 4 ounces (FSN 6505-153-8809) Sodium chloride - sodium bicarbonate mixture, 4.5 Gm, 2s (FSN 6505-663-2636) (i) (j) (k) Compress, gauze, 4 by 4 inch, package of 200 (FSN 6510-200-3060) Bandage, gauze, roller, 4 inches by 10 yards (FSN 6510-200-6000) Comp

28、ress and bandage, field, 18 by 22 inches (FSN 6510-201-2890) (1) Dressing, first aid, field, 4 by 7 inches (FSN 6510-201-7435) (m) Gauze, absorbent, 36 inches wide by 5 yards (FSN 6510-202-1000) (n) Wadding, cotton, surgical sheet, 5 inches by 6 yards package of 12 (FSN 6510-204-2000) NOTE: One each

29、 of items g, h, i, j, k, 1, my and n, furnished as part o the training aid loaned to the contractor shall be used to provide information required for fabrication of dummy outer containers. similar in size, shape and appearwe shall tie reproduced by the contractor in sufficient quantity to meet the r

30、equirements specified herein and shall be mounted on the display panel in lieu of actual items. Upon completion of the requirements specified herein, the contractor shall return the complete train- ing aid, FSN 6910-775-5342 to the procuring activity marked for AFD 2020 stock. Dummy outer containers

31、 7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- - MIL-T-273548 69 M 999770b 0385593 5 . 3.6 Government Furnished Property. The following Government furnished property 1 will be furnished in the quantities specified in Table 1, for inclusion in ea

32、ch training aid fabricated by the contractor (see 6.2). Safety pins, large, curved orthopedic, card of 12 (FSN 6530-663-1555) Splint, Wire, ladder 3-1/2 by 31 inches (FSN 6515-373-2100) AFM 50-9 How to Instruct AFM 160-6-2 Instructors Guide AFM i60-34 . Medical Airmans Manual AFM 160-46 Preventive M

33、edicine AFM 355-8 AFP 35-5-3 Airmans Manual for Defense against CBR attack, First Aid for Airmen 3.7 Workmanship. The training aid, including all parts and accessories, shall be fabricated and furnished in a thoroughly workmanlike manner. attention shall be given to freedom from blemishes, defects,

34、loose connections, binding, worn parts, or undue friction of working parts; thoroughness of soldering, welding, and painting. Particular 4. QUALITY ASSURANCE PROVISIONS 4.1 Resaonsibility for InsDection. Unless otherwise specified in the contract or purchase order the supplier is responsible for the

35、 performance of all inspection requirements as specified herein, the sup lies ma acceptaIn addition to any special marking required by the contract or purchase order (see 6.2), interior and exterior containers shall be marked in accordance with MIL-STD-129. number shall be as follows: The shipment m

36、arking nomenclature and stock Training aid, First aid, Non-medical personnel, TAU-.41/E Stock Number 6910-775-5342 6. NOTES 6,l Intended Use. teaching emergency,medical care, to non-medical personnel, which consists of the first aid treatment procedures required to sustain life and minimize injury u

37、ntil the casualty, entesrnedical channels. 6.2 Orderina Data. Procurement documents should specify the following: The TAUdl/E training aid is intended to be used for (a) Title, number, and date of this specification (b) Whether a preproduction sample is required (see 3.) ( c) When Government-Loaned

38、and Government-Furnished Property will be made . :- available (see 3.5 and 3.6) (a) Selection of applicable levels of packaging and packing (see 5.1 and 5-21 11 . Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-KUT-2735kB (IISAF) t (e) Whether specia

39、l marking is required (see 5.4) 6.3 JnFtructionF for Preuroduction SamDle Test The preproduction sample ahall be teeted at a site selected by the contractor under the supervision of the procuring activity. (hl8todian: Air Force - 70 Beviuwer: Air Force - 70 t Preparing Activity: Air Force - 70 ProJeck Number 69104078 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-