AIR FORCE MIL-T-6284 K (1)-1984 TROUSERS EXTREME COLD WEATHER TYPE F-1B《F-1B型极端天气转冷型长裤》.pdf

1、MIL-T-6284K AMENDMENT 1 8 March 1984 MILITARY SPECIFICATION TROUSERS, EXTREME COLD TJEATHER, TYPE F-1B This amendment forms a part of Military Specification MIL-T-hi84K dated 26 March 1979, and is approved for use by all Departments and Agencies of the Department of Defense. PAGE 1 Delete the benefi

2、cial comment at bottom of page 1 and substitute the following: “Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: the Engineering Division, San Antonio ALC/MMEDO, Kelly AFB, Texas 78241 by using t

3、he self-addressed Standardization Document Improvement Proposal (DD For 1426) appearing at the end of this document or by letter! 2.1, delete in its entirety and substitute the following 2.1 and new paragraph 2.1.1: “2.1 Government documents. 2.1.1 Specific.ations and standards. Unless otherwise spe

4、cified (see 6.2) the following specifications and standards of the issue listed in that issue of the Department of Defense Index of Specifications and Standards (DoDISS) specified in the solicitation, form a part of this specifications to the extent specified herein. It Under SPECIFICATION, FEDERAL,

5、 CCC-C-440, delete title and substitute: “Cloth, Cheesecloth, Cotton, Bleached and Unbleached.“ PAGE 2 Under SPECIFICATION, MILITARY, delete “MIL-S-6790 Suspenders, Flying Suit“ and substitute “MIL-S-6790 Suspenders, Trousers, (Suspenders, Flying Suit).“ Under SPECIFICATION, MILITARY, MIL-C-18387, d

6、elete and substitute: “Cloth, Twill, Cotton, Fire Retardant Treated.“ Under STANDARDS, MILITARY add: “MIL-STD-147 Palletized Unit Loads 40“ X 48“ Pa 11 et s I Delete parenthetical source paragraph and substitute the following: “(Copies of specifications , standards, handbooks , drawings , and public

7、ations required by manufacturers in connection with specific acquisition functions should be obtained from the contracting activity or as directed by the con- . tracting officer.)“ FSC 8415 1 of 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-r MIL

8、-T-bZ84K (1) 84 m 3933306 037548ll 3 m I MIL-T-6284K AMENDMENT 1 Add the following new paragraph 2.1.2 and industry standard (ASTM): “2.1.2 Other publications. The following document(s) form a part of this specification to the extent specified herein. which are indicated as DoD adopted shall be the

9、issue listed in the current DoDISS and the supplement thereto, if applicable. The issues ofkhe documents AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) ASTM D 3951-82 Standard Practice for Comercial Packaging (Application for copies of ASTM publications should be addressed to the American Society

10、 for Testing and Materials, 1916 Race Street, Philadelphia, Pennsylvania 19103.)“ Add the following new paragraph 2.1.3: “2.1.3 Order of precedence, In the event of a conflict between the text of this specification and the references cited herein, the text of this specifi- cation shall take preceden

11、ce.“ PAGE 3 3.2.1.2 , line 2 , change “Retarded“ to “Retardant. I 3.2.1.2 , line 3, change “retardent“ to “retardant. II 3.2.10, line 3, change “accomodate“ to “accommodate.“ PAGE 6 3.4, line 1, change “a outer“ to “an outer.“ 3.5.1, delete line 1 and substitute: “3.5.1 Stitches, seams and stitching

12、s. Stitches, seams, and.“ PAGE 10 Under TABLE III Sewing operations.: Delete operation 5d and substitute: Id. Turn the flaps and raise with a double row of stitching 1/4 inch gage 1/16 inch from edge.“ PAGE 11 Under TABLE III Sewing operations.: entirety and substitute the following: Delete operatio

13、n 7 and 7a in their 2 of 5 d Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NIL-T-628YK (1) 84 7777706 0375485 O MIL-T-6284K AMENDMENT 1 Seam and Stitch Stitching Stitches “No, Description of Operations Type Type Per Inch 7. JOIN BACK SEAM OF INTERL

14、INING. 515 or SSa-2 . *10-12 Join the seat seam with a % inch 516 or gauge safety stitch. In joining 519 the seat seam, stretch shall be applied to the crotch to insure sufficient length of thread.“ PAGE 15 Under TABLE LI1 Sewing operations.: and substitute the following: Delete operation 15a in its

15、 entirety Seam and Stitch Stitching Stitches Description of Operations Type Type Per Inch II a. Join the inseams of the inner 515 or SSa-2 10-12 shells with % inch gauge safety stitch. Join the side seams above 519 and below the pass-through opening with a f inch gauge safety stitch.“ 516 or PAGE 16

16、 Under TABLE III Sewing operations.: Operation 18b, line 1, delete the word “with . I PAGE 17 Under TABLE III Sewing operations.: Operation 18d, line 5, delete “o“ and substitute “of .I PAGE 21 TABLE IV in material column, under basic material, delete “and see 3.2.1.3 for class 2.“ TABLE IV in mater

17、ial column, under lining, delete “and see 3.2.1.4 for class 2.“ PAGE 22 3.9.1, line 1, delete “Type I“ and substitute “Type VI.“ PAGE 24 4.3.2, line 11, delete “50.0“ and substitute “40.0.“ PAGE 28 Under 9d(2) line 2, change “ro“ to “or. I 3 of 5 Provided by IHSNot for ResaleNo reproduction or netwo

18、rking permitted without license from IHS-,-,-MIL-T-6284K AMENDMENT 1 PAGE 29 Under 9i(l), line 1, change 3-0“ to “or. I PAGE 38 4.3.2.4, delete in its entirety. 5.1, delete and substitute: 5.1 Preservation. Preservati I1 specified (see 6.2).“ 5.1.1.1, delete in its entirety. shall be level A Commerc

19、ial , Add the following new paragraph 5.1.2 : “5.1.2 Commercial. One pair of trousers shall be packaged in accordance with ASTM D 3951.“ PAGE 39 5.2, delete in its entirety and substitute the following: “5.2 Packing. Packing shall be level A, B, or Commercial, as specified (see 6.2).“ 5.2.2, after l

20、ine 4, delete and substitute: “24 inches by 16 inches. Closure and strapping shall be in accordance Toward the end of the with the appendix to the container specification. contract or when there are less than the quantity of the same size required per container, mixed sizes (see 5.3.1) may be packed

21、 within the same shipping container. Add the following new paragraph 5.2.3. “5.2.3 Palletization. Unitized loads, commensurate with the level of packing specified in the contract or order, shall be palletized in accordance with MIL-STD-147. Palletized loads shall be uniform in size and quantities to

22、 the greatest extent possible. If the container is of a size which does not conform to any of the pallet patterns specified in MIL-STD-147, the pallet pattern used shall first be approved by the contracting officer.“ 5.3, delete in its entirety and substitute the following: “5.3 Marking. In addition

23、 to any special marking required by the contract or order, interior containers and exterior shipping containers shall be c_ marked in accordance with MIL-STD-129, or ASTM D 3951 as applicable.“ 6.2.d., delete and substitute the following: “d. Selection of applicable levels of preservation, packaging

24、 and packing as specified (see 5.1 Air Force - 99 Amy - GL Review activities : Amy - MD DM - CT Preparing activity; Air Force - 82 Project 8415-0398 User activity; Air Force - 45 FSC 8415 5 Of 5 US. GOVERNMENT PRINTING OFFICE 1984-705-040/A1713 . i Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-