API SPEC 17D-2011 Design and Operation of Subsea Production Systems-Subsea Wellhead and Tree Equipment (SECOND EDITION ERTA September 2011 ERTA 2 January 2012 ERTA 3 June 2013 ERTA.pdf

1、Design and Operation of Subsea Production SystemsSubsea Wellhead and Tree EquipmentANSI/API SPECIFICATION 17DSECOND EDITION, MAY 2011EFFECTIVE DATE: FEBRUARY 1, 2013 for Valve and Actuator Design Validation (Test Requirements) OnlyEFFECTIVE DATE: NOVEMBER 1, 2011for All Other RequirementsERRATA, SEP

2、TEMBER 2011ERRATA 2, JANUARY 2012ERRATA 3, JUNE 2013ERRATA 4, JULY 2013ERRATA 5, OCTOBER 2013ERRATA 6, AUGUST 2015ERRATA 7, OCTOBER 2015ADDENDUM 1, SEPTEMBER 2015ISO 13628-4 (Identical), Design and operation of subsea production systemsPart 4: Subsea wellhead and tree equipmentDesign and Operation o

3、f Subsea Production SystemsSubsea Wellhead and Tree EquipmentUpstream SegmentANSI/API SPECIFICATION 17DSECOND EDITION, MAY 2011EFFECTIVE DATE: FEBRUARY 1, 2013 for Valve and Actuator Design Validation (Test Requirements) OnlyEFFECTIVE DATE: NOVEMBER 1, 2011for All Other RequirementsERRATA, SEPTEMBER

4、 2011ERRATA 2, JANUARY 2012ERRATA 3, JUNE 2013ERRATA 4, JULY 2013ERRATA 5, OCTOBER 2013ERRATA 6, AUGUST 2015ERRATA 7, OCTOBER 2015ADDENDUM 1, SEPTEMBER 2015ISO 13628-4 (Identical), Design and operation of subsea production systemsPart 4: Subsea wellhead and tree equipmentSpecial NotesAPI publication

5、s necessarily address problems of a general nature. With respect to particular circumstances, local,state, and federal laws and regulations should be reviewed.Neither API nor any of APIs employees, subcontractors, consultants, committees, or other assignees make anywarranty or representation, either

6、 express or implied, with respect to the accuracy, completeness, or usefulness of theinformation contained herein, or assume any liability or responsibility for any use, or the results of such use, of anyinformation or process disclosed in this publication. Neither API nor any of APIs employees, sub

7、contractors,consultants, or other assignees represent that use of this publication would not infringe upon privately owned rights.API publications may be used by anyone desiring to do so. Every effort has been made by the Institute to assure theaccuracy and reliability of the data contained in them;

8、 however, the Institute makes no representation, warranty, orguarantee in connection with this publication and hereby expressly disclaims any liability or responsibility for loss ordamage resulting from its use or for the violation of any authorities having jurisdiction with which this publication m

9、ayconflict.API publications are published to facilitate the broad availability of proven, sound engineering and operatingpractices. These publications are not intended to obviate the need for applying sound engineering judgmentregarding when and where these publications should be utilized. The formu

10、lation and publication of API publicationsis not intended in any way to inhibit anyone from using any other practices.Any manufacturer marking equipment or materials in conformance with the marking requirements of an API standardis solely responsible for complying with all the applicable requirement

11、s of that standard. API does not represent,warrant, or guarantee that such products do in fact conform to the applicable API standard.Classified areas may vary depending on the location, conditions, equipment, and substances involved in any givensituation. Users of this Specification should consult

12、with the appropriate authorities having jurisdiction.Users of this Specification should not rely exclusively on the information contained in this document. Sound business,scientific, engineering, and safety judgment should be used in employing the information contained herein. All rights reserved. N

13、o part of this work may be reproduced, translated, stored in a retrieval system, or transmitted by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission from the publisher. Contact the Publisher, API Publishing Services, 1220 L Street, NW, Washing

14、ton, DC 20005.Copyright 2011 American Petroleum InstituteAPI ForewordNothing contained in any API publication is to be construed as granting any right, by implication or otherwise, for themanufacture, sale, or use of any method, apparatus, or product covered by letters patent. Neither should anythin

15、gcontained in the publication be construed as insuring anyone against liability for infringement of letters patent.Shall: As used in a standard, “shall” denotes a minimum requirement in order to conform to the specification.Should: As used in a standard, “should” denotes a recommendation or that whi

16、ch is advised but not required in orderto conform to the specification. This document was produced under API standardization procedures that ensure appropriate notification andparticipation in the developmental process and is designated as an API standard. Questions concerning theinterpretation of t

17、he content of this publication or comments and questions concerning the procedures under whichthis publication was developed should be directed in writing to the Director of Standards, American PetroleumInstitute, 1220 L Street, NW, Washington, DC 20005. Requests for permission to reproduce or trans

18、late all or any partof the material published herein should also be addressed to the director.Generally, API standards are reviewed and revised, reaffirmed, or withdrawn at least every five years. A one-timeextension of up to two years may be added to this review cycle. Status of the publication can

19、 be ascertained from theAPI Standards Department, telephone (202) 682-8000. A catalog of API publications and materials is publishedannually by API, 1220 L Street, NW, Washington, DC 20005.Suggested revisions are invited and should be submitted to the Standards Department, API, 1220 L Street, NW,Was

20、hington, DC 20005, standardsapi.org.iiiv Contents Page Foreword . vii Introduction viii 1 Scope 1 2 Normative references 4 3 Terms, definitions, abbreviated terms and symbols . 5 3.1 Terms and definitions . 5 3.2 Abbreviated terms and symbols 10 4 Service conditions and production specification leve

21、ls . 12 4.1 Service conditions 12 4.2 Product specification levels . 13 5 Common system requirements . 13 5.1 Design and performance requirements 13 5.2 Materials . 25 5.3 Welding . 26 5.4 Quality control . 27 5.5 Equipment marking . 30 5.6 Storing and shipping 31 6 General design requirements for s

22、ubsea trees and tubing hangers . 32 6.1 General . 32 6.2 Tree valving . 34 6.3 Testing of subsea tree assemblies 42 6.4 Marking . 47 6.5 Storing and shipping 47 7 Specific requirements Subsea-tree-related equipment and sub assemblies . 47 7.1 Flanged end and outlet connections . 47 7.2 ISO clamp hub

23、-type connections 65 7.3 Threaded connections 65 7.4 Other end connectors . 65 7.5 Studs, nuts and bolting 66 7.6 Ring gaskets 66 7.7 Completion guidebase 67 7.8 Tree connectors and tubing heads . 68 7.9 Tree stab/seal subs for vertical tree 72 7.10 Valves, valve blocks and actuators . 73 7.11 TFL w

24、ye spool and diverter 86 7.12 Re-entry interface 87 7.13 Subsea tree cap . 88 7.14 Tree-cap running tool . 91 7.15 Tree-guide frame . 93 7.16 Tree running tool . 97 7.17 Tree piping . 100 7.18 Flowline connector systems 102 7.19 Ancillary equipment running tools 105 7.20 Tree-mounted hydraulic/elect

25、ric/optical control interfaces 107 7.21 Subsea chokes and actuators 110 7.22 Miscellaneous equipment . 121 8 Specific requirements Subsea wellhead 125 8.1 General . 125 8.2 Temporary guidebase . 126 8.3 Permanent guidebase . 127 8.4 Conductor housing . 131 8.5 Wellhead housing 134 8.6 Casing hangers

26、 . 137 8.7 Annulus seal assemblies 140 8.9 Bore protectors and wear bushings . 142 8.10 Corrosion cap 144 8.11 Running, retrieving and testing tools . 144 8.12 Trawl protective structure 144 8.13 Wellhead inclination and orientation 144 8.14 Submudline casing hanger and seal assemblies 145 9 Specifi

27、c requirements Subsea tubing hanger system . 146 9.1 General . 146 9.2 Design 146 9.3 Materials . 148 9.4 Testing 149 10 Specific requirements Mudline suspension equipment . 150 10.1 General . 150 10.2 Mudline suspension-landing/elevation ring . 154 10.3 Casing hangers . 155 10.4 Casing hanger runni

28、ng tools and tieback adapters 156 10.5 Abandonment caps . 157 10.6 Mudline conversion equipment for subsea completions . 157 10.7 Tubing hanger system Mudline conversion equipment for subsea completions . 158 11 Specific requirements Drill-through mudline suspension equipment 159 11.1 General . 159

29、11.2 External drill-through casing hangers (outside of the hybrid casing hanger housing) 159 11.3 Hybrid casing hanger housing 159 11.4 Internal drill-through mudline casing hangers 161 11.5 Annulus seal assemblies . 163 11.6 Bore protectors and wear bushings . 164 11.7 Tubing hanger system Drill-th

30、rough mudline equipment for subsea completions 166 11.8 Abandonment caps . 166 11.9 Running, retrieving and testing tools . 166 Annex A (informative) Vertical subsea trees . 167 Annex B (informative) Horizontal subsea trees 171 Annex C (informative) Subsea wellhead 174 Annex D (informative) Subsea t

31、ubing hanger . 176 Annex E (normative) Mudline suspension and conversion systems . 180 Annex F (informative) Drill-through mudline suspension systems 187 Annex G (informative) Assembly guidelines of ISO (API) bolted flanged connections . 189 Annex H (informative) Design and testing of subsea wellhea

32、d running, retrieving and testing tools 199 Annex I (informative) Procedure for the application of a coating system . 202 Annex J (informative) Screening tests for material compatibility 205 Annex K (informative) Design and testing of pad eyes for lifting . 210 Annex L (informative) Hyperbaric testi

33、ng guidelines 225 Annex M (informative) Purchasing guidelines 227 Annex N (informative) Use of the API Monogram by Licensees . 249 Annex O (informative) Regional Annex . 252 Bibliography . 255 vi API SPECIFICATION 17D, ISO 13628-4 VII vii Foreword ISO (the International Organization for Standardizat

34、ion) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be r

35、epresented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards

36、 are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an Internat

37、ional Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 13628-4 wa

38、s prepared by Technical Committee ISO/TC 67, Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries, Subcommittee SC 4, Drilling and production equipment. This second edition cancels and replaces the first edition (ISO 13628-4:1999), which has been techn

39、ically revised. ISO 13628 consists of the following parts, under the general title Petroleum and natural gas industries Design and operation of subsea production systems: Part 1: General requirements and recommendations Part 2: Unbonded flexible pipe systems for subsea and marine applications Part 3

40、: Through flowline (TFL) systems Part 4: Subsea wellhead and tree equipment Part 5: Subsea umbilicals Part 6: Subsea production control systems Part 7: Completion/workover riser systems Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems Part 9: Remotely Operated Tool (RO

41、T) intervention systems Part 10: Specification for bonded flexible pipe Part 11: Flexible pipe systems for subsea and marine applications A part 12, dealing with dynamic production risers, a part 14, dealing with High Integrity Pressure Protections Systems (HIPPS), a part 15, dealing with subsea str

42、uctures and manifolds, a part 16, dealing with specifications for flexible pipe ancillary equipment, and a part 17, dealing with recommended practice for flexible pipe ancillary equipment, are under development. VIII DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS, PART 4: SUBSEA WELLHEAD AND TREE

43、 EQUIPMENT viii Introduction This second edition of ISO 13628-4 has been updated by users and manufacturers of subsea wellheads and trees. Particular attention was paid to making it an auditable standard. It is intended for worldwide application in the petroleum industry. It is not intended to repla

44、ce sound engineering judgement. It is necessary that users of this part of ISO 13628 be aware that additional or different requirements can better suit the demands of a particular service environment, the regulations of a jurisdictional authority or other scenarios not specifically addressed. A majo

45、r effort in developing this second edition was a study of the risks and benefits of penetrations in subsea wellheads. All previous editions of both this part of ISO 13628 and its parallel API document Specification for Subsea Wellhead and Christmas Tree Equipment (Specification 17D) prohibited wellh

46、ead penetrations. However, that prohibition was axiomatic. In developing this second edition, the workgroup used qualitative risk analysis techniques and found that the original insight was correct: subsea wellheads with penetrations are more than twice as likely to develop leaks over their life as

47、those without penetrations. The catalyst for examining this portion of the original editions of the API and ISO standards was the phenomenon of casing pressure and its monitoring in subsea wells. The report generated by the aforementioned ris k analysis has become API 17 TR3 and API RP 90. The workg

48、roup encourages the use of these documents when developing designs and operating practices for subsea wells. Care has also been taken to address the evolving issue of using external hydrostatic pressure in design. The original versions of both API 17D and ISO 13628-4 were adopted at a time when the

49、effects of that parameter were relatively small. The industrys move into greater water depths has prompted a consideration of that aspect in this version of this part of ISO 13628. The high-level view is that it is not appropriate to use external hydrostatic pressure to augment the applications for which a component can be used. For example, this part of ISO 13628 does not allow the use of a subsea tree rated for 69 MPa (10 000 psi) installed in 2 438 m (8 000 ft) of water on a well that has a shut-in tubing pressure greater than 69 MPa (