API STD 689-2007 Collection and Exchange of Reliability and Maintenance Data for Equipment (First Edition)《设备可靠性与维护数据的收集与交换.第1版》.pdf

1、 Collection and Exchange of Reliability and Maintenance Data for Equipment ANSI/API STANDARD 689 FIRST EDITION, JULY 2007 ISO 14224:2006 (Identical), Petroleum, Petrochemical and Natural Gas IndustriesCollection and Exchange of Reliability and Maintenance Data for Equipment ii iSpecial Notes API pub

2、lications necessarily address problems of a general nature. With respect to particular circumstances, local, state, and federal laws and regulations should be reviewed. Neither API nor any of APIs employees, subcontractors, consultants, committees, or other assignees make any warranty or representat

3、ion, either express or implied, with respect to the accuracy, completeness, or usefulness of the information contained herein, or assume any liability or responsibility for any use, or the results of such use, of any information or process disclosed in this publication. Neither API nor any of APIs e

4、mployees, subcontractors, consultants, or other assignees represent that use of this publication would not infringe upon privately owned rights. API publications may be used by anyone desiring to do so. Every effort has been made by the Institute to assure the accuracy and reliability of the data co

5、ntained in them; however, the Institute makes no representation, warranty, or guarantee in connection with this publication and hereby expressly disclaims any liability or responsibility for loss or damage resulting from its use or for the violation of any authorities having jurisdiction with which

6、this publication may conflict. API publications are published to facilitate the broad availability of proven, sound engineering and operating practices. These publications are not intended to obviate the need for applying sound engineering judgment regarding when and where these publications should

7、be utilized. The formulation and publication of API publications is not intended in any way to inhibit anyone from using any other practices. Any manufacturer marking equipment or materials in conformance with the marking requirements of an API standard is solely responsible for complying with all t

8、he applicable requirements of that standard. API does not represent, warrant, or guarantee that such products do in fact conform to the applicable API standard. All rights reserved. No part of this work may be reproduced, stored in a retrieval system, or transmitted by any means, electronic, mechani

9、cal, photocopying, recording, or otherwise, without prior written permission from the publisher. Contact the Publisher, API Publishing Services, 1220 L Street, N.W., Washington, D.C. 20005. Copyright 2007 American Petroleum Institute ii API Foreword Nothing contained in any API publication is to be

10、construed as granting any right, by implication or otherwise, for the manufacture, sale, or use of any method, apparatus, or product covered by letters patent. Neither should anything contained in the publication be construed as insuring anyone against liability for infringement of letters patent. T

11、his document was produced under API standardization procedures that ensure appropriate notification and participation in the developmental process and is designated as an API standard. Questions concerning the interpretation of the content of this publication or comments and questions concerning the

12、 procedures under which this publication was developed should be directed in writing to the Director of Standards, American Petroleum Institute, 1220 L Street, N.W., Washington, D.C. 20005. Requests for permission to reproduce or translate all or any part of the material published herein should also

13、 be addressed to the director. Generally, API standards are reviewed and revised, reaffirmed, or withdrawn at least every five years. A one-time extension of up to two years may be added to this review cycle. Status of the publication can be ascertained from the API Standards Department, telephone (

14、202) 682-8000. A catalog of API publications and materials is published annually and updated quarterly by API, 1220 L Street, N.W., Washington, D.C. 20005. Suggested revisions are invited and should be submitted to the Standards and Publications Department, API, 1220 L Street, NW, Washington, DC 200

15、05, standardsapi.org. iiiContents Page API Foreword ii Foreword iv Introduction.v 1 Scope1 2 Normative references2 3 Terms and definitions .2 4 Abbreviated terms.8 5 Application .8 5.1 Equipment coverage .8 5.2 Time periods 9 5.3 Users of this International Standard .9 5.4 Limitations .10 5.5 Exchan

16、ge of RM data 10 6 Benefits of RM data collection and exchange11 7 Quality of data13 7.1 Obtaining quality data.13 7.2 Data collection process 16 8 Equipment boundary, taxonomy and time definitions 17 8.1 Boundary description .17 8.2 Taxonomy.18 8.3 Timeline issues20 9 Recommended data for equipment

17、, failures and maintenance23 9.1 Data categories23 9.2 Data format.24 9.3 Database structure24 9.4 Equipment data26 9.5 Failure data 26 9.6 Maintenance data 28 Annex A (informative) Equipment-class attributes .32 Annex B (normative) Interpretation and notation of failure and maintenance parameters 1

18、13 Annex C (informative) Guide to interpretation and calculation of derived reliability and maintenance parameters .132 Annex D (informative) Typical requirements for data .150 Annex E (informative) Key performance indicators (KPIs) and benchmarking156 Annex F (informative) Classification and defini

19、tion of safety-critical failures .165 Bibliography169 iv Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committee

20、s. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the Inter

21、national Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International St

22、andards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the sub

23、ject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 14224 was prepared by Technical Committee ISO/TC 67, Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries. This second edition cancels and repla

24、ces the first edition (ISO 14224:1999), which has been technically modified and extended. Annex B, which contains failure and maintenance notations, has been made normative. Further, additional informative Annexes A, C, D, E and F give recommendations on the use of reliability and maintenance data f

25、or various applications. vIntroduction This International Standard has been prepared based on ISO 14224:1999, experience gained through its use, and know-how and best practices shared through the international development process. In the petroleum, natural gas and petrochemical industries, great att

26、ention is being paid to safety, reliability and maintainability of equipment. The industry annual cost of equipment unreliability is very large, although many plant owners have improved the reliability of their operating facilities by such attention. A stronger emphasis has recently been put on cost

27、-effective design and maintenance for new plants and existing installations among more industrial parties. In this respect, data on failures, failure mechanisms and maintenance related to these industrial facilities and its operations have become of increased importance. It is necessary that this in

28、formation be used by, and communicated between, the various parties and its disciplines, within the same company or between companies. Various analysis methodologies are used to estimate the risk of hazards to people and environment, or to analyse plant or system performance. For such analyses to be

29、 effective and decisive, equipment reliability and maintenance (RM) data are vital. These analyses require a clear understanding of the equipment technical characteristics, its operating and environmental conditions, its potential failures and its maintenance activities. It can be necessary to have

30、data covering several years of operation before sufficient data have been accumulated to give confident analysis results and relevant decision support. It is necessary, therefore, to view data collection as a long-term activity, planned and executed with appropriate goals in mind. At the same time,

31、clarity as to the causes of failures is key to prioritizing and implementing corrective actions that result in sustainable improvements in reliability, leading to improved profitability and safety. Data collection is an investment. Data standardization, when combined with enhanced data-management sy

32、stems that allow electronic collection and transfer of data, can result in improved quality of data for reliability and maintenance. A cost-effective way to optimize data requirements is through industry co-operation. To make it possible to collect, exchange and analyse data based on common viewpoin

33、ts, a standard is required. Standardization of data-collection practices facilitates the exchange of information between relevant parties e.g. plants, owners, manufacturers and contractors throughout the world. 1Petroleum, petrochemical and natural gas industries Collection and exchange of reliabili

34、ty and maintenance data for equipment 1 Scope This International Standard provides a comprehensive basis for the collection of reliability and maintenance (RM) data in a standard format for equipment in all facilities and operations within the petroleum, natural gas and petrochemical industries duri

35、ng the operational life cycle of equipment. It describes data-collection principles and associated terms and definitions that constitute a “reliability language” that can be useful for communicating operational experience. The failure modes defined in the normative part of this International Standar

36、d can be used as a “reliability thesaurus” for various quantitative as well as qualitative applications. This International Standard also describes data quality control and assurance practices to provide guidance for the user. Standardization of data-collection practices facilitates the exchange of

37、information between parties, e.g. plants, owners, manufacturers and contractors. This International Standard establishes requirements that any in-house or commercially available RM data system is required to meet when designed for RM data exchange. Examples, guidelines and principles for the exchang

38、e and merging of such RM data are addressed. Annex A contains a summary of equipment that this International Standard covers. This International Standard recommends a minimum amount of data that is required to be collected and it focuses on two main issues: data requirements for the type of data to

39、be collected for use in various analysis methodologies; standardized data format to facilitate the exchange of reliability and maintenance data between plants, owners, manufacturers and contractors. The following main categories of data are to be collected: equipment data, e.g. equipment taxonomy, e

40、quipment attributes; failure data, e.g. failure cause, failure consequence; maintenance data, e.g. maintenance action, resources used, maintenance consequence, down time. NOTE Clause 9 gives further details on data content and data format. The main areas where such data are used are the following: r

41、eliability, e.g. failure events and failure mechanisms; availability/efficiency, e.g. equipment availability, system availability, plant production availability; maintenance, e.g. corrective and preventive maintenance, maintenance supportability; safety and environment, e.g. equipment failures with

42、adverse consequences for safety and/or environment. API Standard 689/ISO 14224 2 This International Standard does not apply to the following: data on (direct) cost issues; data from laboratory testing and manufacturing (e.g. accelerated lifetime testing); complete equipment data sheets (only data se

43、en relevant for assessing the reliability performance are included); additional on-service data that an operator, on an individual basis, can consider useful for operation and maintenance; methods for analysing and applying RM data (however, principles for how to calculate some basic reliability and

44、 maintenance parameters are included in the annexes). 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (includi

45、ng any amendments) applies. IEC 60034-1:2004, Rotating electrical machines Part 1: Rating and performance IEC 60076-1:2000, Power transformers Part 1: General IEC 60076-2:1993, Power transformers Part 2: Temperature rise EC 60076-3, Power transformers Part 3: Insulation levels, dialectric tests and

46、external clearances in air IEC 60529:2001, Degrees of protection provided by enclosures (IP Code) IEC 62114, Electrical insulation systems Thermal classification 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. NOTE Some derived RM parameters, whi

47、ch can be calculated from collected RM data covered by this International Standard, are contained in Annex C. References to Annex C are given as deemed appropriate. 3.1 availability ability of an item to be in a state to perform a required function under given conditions at a given instant of time o

48、r over a given time interval, assuming that the required external resources are provided NOTE For a more detailed description and interpretation of availability, see Annex C. 3.2 active maintenance time that part of the maintenance time during which a maintenance action is performed on an item, eith

49、er automatically or manually, excluding logistic delays NOTE 1 A maintenance action can be carried out while the item is performing a required function. NOTE 2 For a more detailed description and interpretation of maintenance times, see Figure 4 and Annex C. API Standard 689/ISO 14224 33.3 boundary interface between an item and its surroundings 3.4 common-cause failure failures of different items resulting from the same direct cause, occurring within a relatively short time, where these failures are not consequences of another NOTE Componen