ANSI AGMA 9008-B00-2000 Flexible Couplings -- Gear Type -- Flange Dimensions Inch Series.pdf

1、ANSI/AGMA 9008-B00Revision of AGMA 516.01Reaffirmed May 2012American National StandardFlexible Couplings - GearType - Flange Dimensions,Inch SeriesANSI/AGMA9008-B00iiFlexible Couplings - Gear Type - Flange Dimensions, Inch SeriesANSI/AGMA 9008-B00(Revision of AGMA 516.01)Approval of an American Nati

2、onal Standard requires verification by ANSIthat therequire-ments for due process, consensus and other criteria for approval have been met by thestandards developer.Consensus is established when, in the judgment of the ANSI Board of Standards Review,substantial agreement has been reached by directly

3、and materially affected interests.Substantialagreementmeansmuchmorethanasimplemajority,butnotnecessarilyuna-nimity. Consensus requires that all views and objections be considered, and that aconcerted effort be made toward their resolution.TheuseofAmericanNationalStandards is completely voluntary; th

4、eir existence does notin any respect preclude anyone, whether he has approved the standards or not, frommanufacturing, marketing, purchasing or using products, processes or procedures notconforming to the standards.The American National Standards Institute does not develop standards and will in noci

5、rcumstances give an interpretation of any American National Standard. Moreover, noperson shall have the right or authority to issue an interpretation of an American NationalStandardinthenameoftheAmericanNationalStandardsInstitute. Requestsforinterpre-tation of this standard should be addressed to th

6、e American Gear ManufacturersAssociation.CAUTION NOTICE: AGMA technical publications are subject to constant improvement,revision or withdrawal as dictated by experience. Any person who refers to any AGMATechnical Publication should be sure that the publication is the latest available from theAssoci

7、ation on the subject matter.Tables or other self-supporting sections may be quoted or extracted. Credit lines shouldread: Extracted from ANSI/AGMA 9008-B00, Flexible Couplings - Gear Type - FlangeDimensions, Inch Series, with the permission of the publisher, the American GearManufacturers Associatio

8、n, 1500 King Street, Suite 201, Alexandria, Virginia 22314.Approved September 25, 2000ABSTRACTThisstandarddefinestheNorthAmericanindustrypracticefortheinterfacedimensionsofthesleevesandrigidhubs of both shrouded and exposed bolt, inch series, gear type couplings.Published byAmerican Gear Manufacture

9、rs Association1500 King Street, Suite 201, Alexandria, Virginia 22314Copyright Ge3 2000 by American Gear Manufacturers AssociationAll rights reserved.No part of this publication may be reproduced in any form, in an electronicretrieval system or otherwise, without prior written permission of the publ

10、isher.Printed in the United States of AmericaISBN: 1-55589-736-3AmericanNationalStandardANSI/AGMA 9008-B00AMERICAN NATIONAL STANDARDiiiContentsPageForeword iv.1 Scope 12 Symbols 13 Responsibility 1.4 Dimensions 1.Tables1 Symbols 12 Exposed bolt couplings 2.3 Shrouded bolt couplings 3.ANSI/AGMA 9008-

11、B00 AMERICAN NATIONAL STANDARDivForewordThe foreword, footnotes and annexes, if any, in this document are provided forinformational purposes only and are not to be construed as a partof ANSI/AGMAStandard9008-B00, Flexible Couplings - Gear Type - Flange Dimensions, Inch Series.Equipment manufacturers

12、 and industrial users of gear couplings have found it desirable tohave gear coupling sleeves and rigid hubs manufactured to specific flange dimensions.Industry standardization of gear coupling flange dimensions enables machinerymanufacturerstodesignshaftsandflanges,flywheels,adapters,etc.,tobecompat

13、iblewithall standard gear couplings.This standard defines the North American industry practice, which is probably the worldslargest standardized production volume, in a form that can be followed throughout theworld.ThefirstdraftofAGMA516.01waspreparedbytheFlexibleCouplingTechnicalCommitteein July 19

14、76. It was approved by the Flexible Coupling Product Group as of December 17,1976. It was balloted upon by the AGMA membership as of March 31, 1978.The standard ANSI/AGMA 9008-B00 is a revision and redesignation of AGMA 516.01.Revisions consisted of a title change to better describe the standard as

15、an inch seriesstandard,andthedimensionsinthetablesareprovidedwiththeinchdimensionsasprimarywith metric conversions where appropriate.ANSI/AGMA 9008-B00 was approved as a standard by the AGMA membership onMarch 4, 1999, and approved as an American National Standard on September 25, 2000.Suggestions f

16、or improvement of this standard will be welcome. They should be sent to theAmerican Gear Manufacturers Association, 1500 King Street, Suite 201, Alexandria,Virginia 22314.ANSI/AGMA 9008-B00AMERICAN NATIONAL STANDARDvPERSONNEL of the AGMA Flexible Couplings CommitteeChairman: G. Pokrandt The Falk Cor

17、poration.Vice Chairman: J. Paluh Ameridrives InternationalACTIVE MEMBERSD.A. Boccio Ameridrives InternationalT. Cain Lucas AerospaceD.E. Crysler T.B. Woods Incorporated.D.B. Cutler Rexnord - Coupling DivisionD. Hindman Rexnord Elastomer Products DivisionJ.W. Mahan Lovejoy, Inc.J.R. Mancuso Kop-Flex,

18、 Inc.R.S. Post Rexnord - Coupling DivisionT. Schatzka Lovejoy, Inc.J. Sherred Renold, IncJ.O. Tennies Renold, IncR.G. Thompson T.B., Woods IncorporatedASSOCIATE MEMBERSK. H. Hoelmer Xtek, IncorporatedP.J. Dixon Metal Improvement Company, IncA. Hasebrock Flender CorporationT. Hewitt Rexnord - Couplin

19、g DivisionV. Ivers Xtek, Incorporated.D. Lindsay Emerson Gearing.R.E. Munyon Kop-Flex, IncS.L. Pearson Mobil Oil Corporation.A.E. Phillips Rockwell Automation/DodgeD. Reynolds Rockwell Automation/Dodge.E. I. Rivin Wayne State UniversityJ. Sherred Renold, IncJ. F. Slusarick Huffman CorporationT. Vanc

20、leave Xtek, Incorporated.W. Welsch Metal Improvement Company, IncR. Whitney Riverhawk CompanyANSI/AGMA 9008-B00 AMERICAN NATIONAL STANDARDvi(This page is intentionally left blank.)1ANSI/AGMA 9008-B00AMERICAN NATIONAL STANDARDAmerican National Standard -Flexible Couplings -Gear Type - FlangeDimension

21、s, Inch Series1 ScopeThis standard defines the interface dimensions forinchseriesshroudedandexposedboltgearcouplingflanges.1.1 ApplicabilityThis standard covers the dimensions for gearcoupling sleeve and rigid hub flange outside diame-ter, bolt circle, flange width, hole size, number ofholes, hole l

22、ength and counterbore diameter orgroove width for exposed and shrouded bolt gearcouplings.Thegearcouplingsizescoveredinthisstandardare:Forexposedboltcouplings: 11/2,2,21/2,3,31/2,4,41/2,5,6,7,8and9.For shrouded bolt couplings: 11/2,2,21/2,3,31/2,4, 41/2and 5.2 SymbolsThe symbols used in this standar

23、d can be found intable 1.NOTE: The symbols and terms used in this standardmay differ from other AGMA standards. The usershould not assume that familiar symbols can be usedwithout a careful study of their defined use.Table 1 - SymbolsSymbol DefinitionD1Flange outside diameterD2Bolt circle diameterD3N

24、ominal flange hole diameterD4Counterbore diameter or groovewidth for shrouded bolt couplingsL1Flange widthL2Hole length of shrouded boltcouplings3 ResponsibilityFlange dimensions are only one of the factors thatmust be considered for interchangeability of flexiblecouplings. It is the responsibility

25、of the purchaser toassure that all other factors are given properconsideration if a substitution is made.4 DimensionsThe flange dimensions for inch series exposed boltgear couplings are presented in table 2. The flangedimensions for inch series shrouded bolt gearcouplingsarepresentedintable3. Tolera

26、nces foralldimensionslistedintables2and3areinaccordancewith individual manufacturers practice. Wheremultiple values are shown in tables 2 and 3, theyrepresent the range of various manufacturersdimensions.ANSI/AGMA9008-B00AMERICANNATIONALSTANDARD2Table2-ExposedboltcouplingsD1D2D3L1Couplingsize11/2221

27、/2331/2441/256789D1inch (mm)1)6.00(152.4)7.00(177.8)8.38(212.9)9.44(239.8)11.00(279.4)12.50(317.5)13.62(345.9)15.31(388.9)18.00(457.2)20.75(527.1)23.25(590.6)26.00(660.4)D2inch (mm)1)4.813(122.2)5.875(149.2)7.125(181.0)8.125(206.4)9.500(241.3)11.000(279.4)12.000 (304.8)13.500 (342.9)15.750 (400.1)18

28、.250 (463.6)20.750 (527.1)23.250 (590.6)Numberofholesequallyspaced86688810814161618D3inch2)3/81/25/85/83/43/43/47/87/8111/811/4L1inch (mm)1)0.75 (19)0.75 (19)0.86-0.95(22-24)0.86-0.95(22-24)1.06-1.14(27-29)1.06-1.14(27-29)1.06-1.14(27-29)1.50 (38)0.98-1.02(25-26)1.10-1.14(28-29)1.26-1.30(32-33)1.42-

29、1.50(36-38)NOTES: 1)Decimalinchvaluesarenominalfractionalequivalents.Metricvaluesareconversions.2)Nometricconversiongivenforfractionalvalues.ANSI/AGMA9008-B00AMERICANNATIONALSTANDARD3Table3-ShroudedboltcouplingsD1D2D3D4L1L2Couplingsize11/2221/2331/2441/25D1inch (mm)1)6.00(152.4)7.00(177.8)8.38(212.9

30、)9.44(239.7)11.00(279.4)12.50(317.5)13.63(346.1)15.31(388.9)D2inch (mm)1)4.813(122.2)5.813(147.6)7.000(177.8)8.000(203.2)9.281(235.7)10.625 (269.9)11.750(298.5)13.188 (335.0)Numberofholesequallyspaced810101212141414D3inch2)3/83/81/21/25/85/85/83/4D4(Minimum)3)inch (mm)1)0.81(20.6)0.81(20.6)1.06(27.0

31、)1.06(27.0)1.31(33.3)1.31(33.3)1.31(33.3)1.56(39.7)L1(Reference)inch(mm)1)0.75 (19)0.75 (19)0.87-0.94(22-24)0.87-0.94(22-24)1.06-1.14(27-29)1.06-1.14(27-29)1.06-1.14(27-29)1.50 (38)L2inch (mm)1)0.20-0.28(5-7)0.20-0.28(5-7)0.28-0.31(7-8)0.28-0.31(7-8)0.31-0.39(8-10)0.31-0.39(8-10)0.31-0.39(8-10)0.51-

32、0.59(13-15)NOTES: 1)Decimalinchvaluesarenominalfractionalequivalents.Metricvaluesareconversions.2)Nometricconversiongivenforfractionalvalues.3)D4iscounterborediameterorgroovewidthforshroudedboltcouplings.D4valuesarenotapplicabletodesignswhereboltheadsornutsarenon-turning(locked).PUBLISHED BYAMERICAN GEAR MANUFACTURERS ASSOCIATION1500 KING STREET, ALEXANDRIA, VIRGINIA 22314