ANSI AIIM MS15-2000 Dimensions and Operational Constraints for Single-Core Cartridge for 16 mm Processed Microfilm《16mm已冲洗缩微胶片用单芯暗盒的尺寸和操作限制》.pdf

1、ANSIIAIIM MSl5-2000 Standard for Information and Image Management - Dimensions and Operational Constraints for Single-Core Cartridge for I6 rnm Processed Microfilm An American National Standards institute Standard prepared by the Association for Information and Image Management International Approve

2、d as an American National Standard July 18, 2000 Abstract: This standard specifies the physical and performance characteristics of cartridges used for storing and viewing processed 16 mm microfilm. The intent of the standard is to achieve compatibility between the cartridge and automatic threading r

3、eaders and reader-printers. DIMENSIONS AND OPERATIONAL CONSTRAINTS FOR SINGLE-CORE CARTRIDGE FOR 16 MM PROCESSED MICROFILM - ANSIIAIIM MS15-2000 Approval of an American National Standard requires verification by ANSI that the re- American quirements for due process, consensus, and other criteria for

4、 approval have been National met by the standards developer. Consensus is established when, in the judgment of the ANSI Board of Standards Re- Standard view, substantial agreement has been reached by directly and materially affected in- terests. Substantial agreement means much more than a simple ma

5、jority, but not necessarily unanimity. Consensus requires that all views and objections be consid- ered, and that a concerted effort be made toward their resolution. The use of American National Standards is completely voluntary; their existence does not in any respect preclude anyone, whether he ha

6、s approved the standards or not, from manufacturing, marketing, purchas- ing, or using products, processes, or procedures not conforming to the standards. The American National Standards Institute does not develop standards and will in no circumstances give an interpretation of any American National

7、 Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American National Stan- dards Institute. Requests for interpretations should be addressed to the secretariat or sponsor whose name appears on the title page

8、 of this standard. CAUTION NOTICE: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute require that action be taken periodically to reaf- firm, revise, or withdraw this standard. Purchasers of American National Standard

9、s may receive current information on all standards by calling or writing the American National Standards Institute. Published by Association for Information and Image Management International 1100 Wayne Avenue, Suite 1100 Silver Spring, MD 20910-5603 Copyright 0 2000 by Association for Information a

10、nd Image Management International All rights reserved. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without prior written permission of the publisher. Printed in the United States of America ISBN 0-89258-350-9 II ASSOCIATION FOR INFORMATI

11、ON AND IMAGE MANAGEMENT INTERNATIONAL DIMENSIONS AND OPERATIONAL CONSTRAINTS FOR SINGLE-CORE CARTRIDGE FOR 16 MM PROCESSED MICROFILM- ANSIIAIIM MS15-2000 Contents Foreword v 1 Scope . 1 2 References . 1 2.1 Referenced Technical Report . 1 2.2 Related American National Standards 2.3 Related American

12、National Standards 3 Definitions . 4 Requirements for Cartridge Assembly . 4.1 General . 2 4.2 Configuration . 2 4.3 Film Speed in Operational Mode . 3 4.4 Materials 3 4.4.1 Impact Strength 3 4.4.3 Compatibility . 3 4.4.2 Test Conditions . ! . 3 4.5 Lubrication . 3 4.6 Permanent Markings . 3 4.7 Lab

13、eling . 3 4.8 Surface Finish . 3 Requirements for Reel . 4 5.1 General . 4 5 5.2 Configuration . 4 5.3.1 Length to Last Image . 4 5.3.2 Affixing Film to the Core 4 5.3.3 Core-Film Secureness Criteria 4 5.3.4 Test Conditions . 4 5.4.1 Width . 4 5.4.3 Length to First Image 5.3 Trailing End of Film . 4

14、 5.4 Leading End of Film 4 5.4.2 Thickness . 4 5.4.4 Terminators . 5.5 Separate leaders . 5 5.5.1 Dimensions 5 5.5.2 Leader-film Secureness Criteria 5 5.6 Optical Compatibility ASSOCIATION FOR INFORMATION AND IMAGE MANAGEMENT INTERNATIONAL iii DIMENSIONS AND OPERATIONAL CONSTRAINTS FOR SINGLE-CORE C

15、ARTRIDGE FOR 16 MM PROCESSED MICROFILM- ANSIIAIIM MS15-2000 5.7 Materials . 5 5.7.1 Flexibility of Flanges . 5 5.7.2 Impact Strength . 5.7.3 Compatibility . 5 5.8 Reel capacity . 5 5.10 Finish . 6 5.9 Permanent markings r, u . Annex A Figures Figure 1 - Cartridge, 16 mm Microfilm (Processed) Single

16、Core . .8 Figure 2 - Reel for 16 mm Microfilm (Processed) .9 Figure 2A - Reel for 16 mm Microfilm (Processed) . i C. Figure 3 - Cartridge (Enclosed Type) for 16 mm Microfilm (Processed) iv ASSOCIATION FOR INFORMATION AND IMAGE MANAGEMENT INTERNATIONAL DIMENSIONS AND OPERATIONAL CONSTRAINTS FOR SINGL

17、E-CORE CARTRIDGE FOR 16 MM PROCESSED MICROFIUM- ANSIIAIIM MS15-2000 Foreword (This foreword is not part of American National Standard for Information and Image Management -Di- mensions and Operational Constraints for Single-Core Cartridge for 16 mm Processed Microfilm, In 1969, ANSI subcommittee PH5

18、.1 formed a task group to develop standards for single- and double-core film containers. Later, both subcommittee PH5.1 and its parent committee PH5 disbanded, and AIIMs committee CI 1, Supply Items Committee, assumed work on developing standards for film containers and prepared the 1990 edition of

19、ANSIIAIIM MS15. The current, 2000 edition was prepared by committee C23, Micrographic Technology Committee, which replaced CI I. This edition of ANSI/AIIM MS 15-2000 fully replaces the 1990 edition. This revision to the 1990 standard includes a new Figure 2A to provide the dimensions for a reel that

20、 provides additional clearance between the flanges of the reel and the inner walls of the enclosed cartridge described in Figure 3. Reels meeting the dimensions in Figure 2 and 2A are suitable for all applications. Figure 3 has been modified to add di- mensions 2s and 2T. The addition of the 2s dime

21、nsion reduces the clearance of the flanges of the reel with the sides of the enclosed cartridge compared to the 1990 revision. The 2s and 2T dimensions are only necessary when an M style cartridge reel (metal insert drive) is housed in the ANSI/AIIM standard enclosed case. These dimensions are neces

22、sary to control the wide leader in the M style cartridge. It is not the purpose of this standard to generate image or film-quality standards, since these can be de- rived from already existing standards. Neither is it within the scope of this standard to address film-coding methods, since they are c

23、onsidered to be a determination made between the vendor and the user. Annex A is informative and offers additional information. Suggestions for improving this standard are welcome. They should be sent to Chair, Standards Board, Association for Information and Image Management, 11 O0 Wayne Avenue, Su

24、ite 11 00, Silver Spring, MD 20910. At the time this standard was approved, the Standards Board of the Association for Information and Image Management International had the following members: Name of Representative Orqanization Represented Herbert J. White, II Genealogical Society of Utah Robert Br

25、eslawski Eastman Kodak Company Betsy Fanning Association for Information and Image Management William E. Neale US. TAG to TC 171 Louis E.Sharpe Picture Elements Herman Siibiger APPLICOM Chris Thompson Recognition Research This standard was approved by committee C23, Micrographic Technology Committee

26、. At the time this standard was approved, committee C23 had the following members: Name of Representative Orqanization ReDresented Herman Silbiger, Acting APPLICOM ANSVAIIM MSI 5-2000.) Chair Don Avedon Tom Berney Richard R. Bordas Sy Bram Robert Breslawski Scott E. Case Myron Chace Steve Cromack Ha

27、rold H. Dorfman Eric Erikson W. Camden Gasc Peter Gell Avedon Associates Consultant Irnation Enterprises Corp. NYC Department of Buildings Eastman Kodak Company Boeing Computer Services American Library Association SKC America, Inc. Dorfman Associates Church of Jesus Christ Latter Day Saints Deere t

28、hat is, the cartridge has only a single reel and therefore a single core. This is a distinguishing feature as compared to the cassette, which has two cores. 3.7 Terminator A coupling device such as a metal clip, hitch, boss, or ear attached to the leading end of the film for threading purposes. 3.8

29、Threading Transferring the leading end of the film from the cartridge into the reader, around all idlers, rollers, and sprockets to the take-up device of the reader. 3.9 Trailing end of film The portion of film beyond the last images recorded (also called trailed. 4 Requirements for Cartridge Assemb

30、ly 4.1 General The following requirements pertain to the cartridge (figure 1 or figure 3) assembled with a reel (figure 2 or 2A) referred to as the cartridge. (All figures are after the annex.) 4.2 Configuration The cartridge shall meet the configuration including dimensions and other requirements s

31、hown on either figure 1 or figure 3. 2 ASSOCIATON FOR INFORMATION AND IMAGE MANAGEMENT INTERNATIONAL DIMENSIONS ANO OPERATIONAL CONSTRAINTS FOR SINGLE-CORE CARTRIDGE FOR 16 MM PROCESSED MICROFILM - ANSIIAIIM MS15-2000 4.3 Film Speed in Operational Mode There shall be no detrimental film scratches or

32、 other film damage on a 3 meter (IO foot) strip of film that has been transported at maximum reader speed back and forth for 25 look-ups (50 passes). This should be compared against reference prints made prior to the test at the start, middle, and end of the film strip. Suitable testing and checking

33、 shall be performed to determine whether such scratching or film damage, if it occurs, is caused by the functioning of the cartridge or by the reader transport system. 4.4 Materials See also annex A. 4.4.1 Impact Strength The cartridge loaded with the equivalent of 30.- m (100 feet) of nominal 0.1 3

34、 mm (0.005 inch) thick film shall withstand the following test without rupture of the assembly and without impairment of use. Test: Drop the cartridge four times, once on a corner, once on an edge, and once on each face, from a height of 1.22 m (4 feet) on a level flat steel surface. 4.4.2 Test Cond

35、itions Testing to determine compliance with impact strength shall be done under the following condi- tions: 50 percent f 15 percent relative humidity; 23 OC k 5 “C (73 OF f 9 “F). Samples shall be conditioned to this environment for 24 hours before testing. 4.4.3 Compatibility All materials of the c

36、artridge shall be chosen so as not to cause loss of information on the film or loss of cartridge function (see annex A). Here firn refers to commercially available film at the time this standard was approved. 4.5 Lubrication The design shall be such that lubrication of the film or cartridge is not r

37、equired by the user. 4.6 Permanent Markings Any marking permanently molded into the cartridge body, either inside or outside, shall be flush or below surfaces. 4.7 Labeling Areas provided for labeling shall be recessed and located such that the information on the label is not vulnerable to damage fr

38、om handling and use. 4.8 Surface Finish The inside surface finish shall be free of any flashing or molding lines in the film path. ASSOCIATION FOR INFORMATION AND IMAGE MANAGEMENT INTERNATIONAL 3 DIMENSIONS AND OPERATIONAL CONSTRAINTS FOR SINGLE-CORE CARTRIDGE FOR 16 MM PROCESSED MICROFILM- ANSIIAII

39、M MS15-2000 5 Requirements for Reel 5.1 General The following requirements pertain to the reel itself (figures 2 and 2A) as a separate unit. Reels that meet the dimensions of figures 2 and 2A are acceptable for all applications. In addition, reels conforming to the dimensions of figure 2A provide ad

40、ditional clearance between the flanges and the interior walls of the enclosed cartridge as described in figure 3. 5.2 Configuration The reel shall meet the configuration including dimensions and other requirements shown on fig- ure 2 or 2A. 5.3 Trailing End of Film The trailer shall meet the followi

41、ng requirements. 5.3.1 Length to Last image The length of the trailer to the last image shall be a minimum 700 mm (27.5 in.) as per ANSI/AIiM MS14. 5.3.2 Affixing Film to the Core A method shall be provided to securely fasten the trailing end of the film to the core of the reei. 5.3.3 Core-Film Secu

42、reness Criteria The fastening method used must withstand 100 stops at a velocity of 1.5 mis (5 feevsecond) us- ing a testing machine that exerts a tension on the film through a clutch that slips at 0.23 N-m (2.03 pound-inches). This test must be passed with all roll lengths and all film types. 5.3.4

43、 Test Conditions Testing to determine compliance with secureness criteria shall be done under the following condi- tions: 50 percent I 15 percent relative humidity; 23 “C & 5 “C (73 OF f 9 OF). Samples shall be conditioned to this environment for 24 hours before testing. 5.4 Leading End of Film The

44、leading end of the film shall meet the following requirements. (See annex A.) 5.4.1 Width Width shall be no greater than 16 mm as specified in IS0 6148. 5.4.2 Thickness Maximum thickness shall be less than 0.1 52 mm (0.006 in.) per IS0 61 48. 5.4.3 Length to First Image The length of the leading end

45、 of the film to the first image shall be a minimum of 700 mm (27.5 in.) as per ANSIIAIIM MS14. 4 ASSOCIATION FOR INFORMATION AND IMAGE MANAGEMENT INTERNATIONAL DIMENSIONS AND OPERATIONAL CONSTRAINTS FOR SINGLE-CORE CARTRIDGE FOR 16 MM PROCESSED MICROFILM - ANSIIAIIM MS15-2000 5.4.4 Terminators The l

46、eading end of the film shall not have terminators for threading the film through the reader. 5.5 Separate leaders Use of separate leaders is optional. If a separate leader is used, the following requirements ap- Ply. 5.5.1 Dimensions Dimensions as to width, thickness, length to first image, and shap

47、e of leading end shall meet the requirements of 5.4. 5.5.2 Leader-film Secureness Criteria The splice must withstand 100 stops at a velocity of 1.5 mls (5 feetfsecond) with tension exerted on the film through a clutch that slips at 0.23 N-m (2.03 pound-inches), under the same test condi- tions as sp

48、ecified in 5.3.4. 5.6 Optical Compatibility Image placement, orientation, and winding shall be in accordance with ANSVAIIM MSI 4 as furtlicr specified in figures 2 and 2A. 5.7 Materials See annex A. 5.7.1 Flexibility of Flanges It shall take not less than 71 grams or more than 212 grams (2-1/2 ounce

49、s to 7-1/2 ounces) to pinch the flanges of an empty reel together 2.54 mm (0.1 inch) from their free positions. The force and measurement shall be applied 3.175 mm (1/8 inch) from the periphery of the flanges. The flanges must return to their original position after the test. 5.7.2 Impact Strength The reel loaded with 30.5 m (100 feet) of 0.13 mm (0.005 inch) thick film shall withstand the fol- lowing test without shattering and without impairment of use. Test: Drop the reel four times from a height of 1.22 m (4 feet) onto a level flat steel surface. The reel is dropped once on the edge of e