ANSI American Society of Safety Engineers A10.1-2011 Pre-Project & Pre-Task Safety and Health Planning.pdf

1、Printed in U.S.A.ASSEAMERICAN SOCIETY OFSAFETY ENGINEERSAMERICAN NATIONAL STANDARDANSI/ASSE A10.1 2011ANSI/ASSE A10.1 2011Pre-Project their existence does not in any respect preclude anyone, whether he/she has approved the standards or not, from manufacturing, marketing, purchasing, or using product

2、s, processes, or procedures not conforming to the standards. The American National Standards Institute does not develop standards and will in no circumstance give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of

3、an American National Standard in the name of the American National Standards Institute. Requests for interpretation should be addressed to the secretariat or sponsor whose name appears on the title page of this standard. Caution Notice: This American National Standard may be revised or withdrawn at

4、any time. The procedures of the American National Standards Institute require that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Stand

5、ards Institute. Published February, 2012 by: American Society of Safety Engineers 1800 East Oakton Street Des Plaines, Illinois 60018-2187 (847) 699-2929 www.asse.org Copyright 2012 by the American Society of Safety Engineers All Rights Reserved. No part of this publication may be reproduced in any

6、form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. Printed in the United States of America American National Standard Foreword (This Foreword is not a part of American National Standard A10.1-2011.) This standard is one of a series of safety

7、standards that have been formulated by the Accredited Standards Committee on Safety in Construction and Demolition Operations, A10. It is expected that the standards in the A10 series will find a major application in industry, serving as a guide to contractors, labor, and equipment manufacturers. Fo

8、r the convenience of users, a list of existing and proposed standards in the A10 series for Safety Requirements in Construction and Demolition Operations follows. A10.1 Pre-Project & Pre-Task Safety & Health Planning A10.2 Safety, Health, and Environmental Training (under development) A10.3 Powder-A

9、ctuated Fastening Systems A10.4 Personnel Hoists and Employee Elevators A10.5 Material Hoists A10.6 Demolition Operations A10.7 Transportation, Storage, Handling, and Use of Commercial Explosives and Blasting Agents A10.8 Scaffolding A10.9 Concrete and Masonry Construction A10.10 Temporary and Porta

10、ble Space Heating Devices A10.11 Personnel and Debris Nets A10.12 Excavation A10.13 Steel Erection A10.15 Dredging A10.16 Tunnels, Shafts, and Caissons A10.17 Safe Operating Practices for Hot Mix Asphalt (HMA) Construction A10.18 Temporary Roof and Floor Holes, Wall Openings, Stairways, and Other Un

11、protected Edges A10.19 Pile Installation and Extraction Operations A10.20 Ceramic Tile, Terrazzo, and Marble Work A10.21 Safe Construction and Demolition of Wind Generation/Turbine Facilities (under development) A10.22 Rope-Guided and Non-Guided Workers Hoists A10.23 Safety Requirements for the Inst

12、allation of Drilled Shafts (under development) A10.24 Roofing Safety Requirements for Low-Sloped Roofs A10.25 Sanitation in Construction A10.26 Emergency Procedures for Construction Sites A10.27 Hot Mix Asphalt Facilities A10.28 Work Platforms Suspended from Cranes or Derricks A10.29 Aerial Platform

13、s in Construction (under development) A10.31 Digger-Derricks A10.32 Personal Fall Protection Used in Construction and Demolition Operations A10.33 Safety and Health Program Requirements for Multi-Employer Projects A10.34 Public Protection A10.37 Debris Nets A10.38 Basic Elements of a Program to Prov

14、ide a Safe and Healthful Work Environment A10.39 Construction Safety and Health Audit Program A10.40 Reduction of Musculoskeletal Problems in Construction A10.41 Equipment Operator and Supervisor Qualifications and Responsibilities (under development) A10.42 Rigging Qualifications and Responsibiliti

15、es in the Construction Industry A10.43 Confined Spaces in Construction (under development) A10.44 Lockout/Tagout in Construction A10.46 Hearing Loss Prevention A10.47 Highway Construction Safety A10.48 Communication Tower Erection (under development) A10.49 Control of Health Hazards (under developme

16、nt) One purpose of these standards is to serve as guides to governmental authorities having jurisdiction over subjects within the scope of the A10 Committee standards. If these standards are adopted for governmental use, the reference of other national codes or standards in individual volumes may be

17、 changed to refer to the corresponding regulations. Revisions: The A10 Committee welcomes proposals for revisions to this standard. Revisions are made to the standard periodically (usually five years from the date of the standard) to incorporate changes that appear necessary or desirable, as demonst

18、rated by experience gained from the application of the standard. Proposals should be as specific as possible, citing the relevant paragraph number(s), the proposed wording, and the reason for the proposal. Pertinent documentation would enable the A10 Committee to process the changes in a more timely

19、 manner. Interpretations: Upon a request in writing to the Secretariat, the A10 Committee will render an interpretation of any requirement of the standard. The request for interpretation should be clear, citing the relevant paragraph number(s) and phrased as a request for a clarification of a specif

20、ic requirement. Oral interpretations are not provided. No one but the A10 Committee (through the A10 Secretariat) is authorized to provide any interpretation of this standard. Approval: Neither the A10 Committee nor American National Standards Institute (ANSI) “approves,“ “certifies,“ “rates,“ or “e

21、ndorses“ any item, construction, proprietary device, or activity. Appendices: Appendices are included in most standards to provide the user with additional information related to the subject of the standard. Appendices are not part of the approved standard. Committee Meetings: The A10 Committee meet

22、s twice a year. Persons wishing to attend a meeting should contact the Secretariat for information. Standard Approval: This standard was processed and approved for submittal to ANSI by the American National Standards Committee on Safety in Construction and Demolition Operations, A10. Approval of the

23、 standard does not necessarily imply (nor is it required) that all Committee members voted for its approval. At the time this standard was published, the A10 Committee had the following members: Richard King, CSP, Chairman James Tomaseski, Vice Chairman Timothy R. Fisher, CSP, CHMM, ARM, CPEA, Secre

24、tary Jennie Dalesandro, Administrative Technical Support Organization Represented Name of Representative Accident Prevention Corporation Frank Burg, CSP, P.E. Michael Serpe, CSP Aegis Corporation Matthew J. Burkart, P.E. Judith Burkart Alstom Power Robert Renney Ted P. Sharp American Insurance Servi

25、ces Group Thad Nosal James G. Borchardt, CSP, CPE ASCE - Construction Institute Committee William R. Nash, P.E. American Society of Safety Engineers Ken Shorter, CSP, ARM A. David Brayton, CSP, CPC American Wind Energy Association Michele Myers Mihelic American Work Platform Training, Inc. Dennis W.

26、 Eckstine Asbestos Workers International Union Terry Lynch Jim E. Lapping, MS, P.E., CSP Associated Builders and Contractors, Inc. Chris Williams Associated General Contractors of America, The Charlie Bird Kevin Cannon Association of Union Constructors, The Wayne Creasap, II A-Z Safety Resources, In

27、c. Jane F. Williams, CPEA, CCA Barton-Malow Company Mark Klimbal, CSP, ARM Clayton Shafer Black & Veatch Richard F. King, CSP John H. Johnson Building & Construction Trades Department Pete Stafford Jim Platner, Ph.D., CIH CPWR - Center for Construction Research & Training Mike McCann, Ph.D., CIH Pet

28、e Stafford Capital Safety Group Scott C. Casebolt J. Thomas Wolner, P.E. Clark Construction Group Tim Sirofchuck, CSP Kurt Dunmire Cole-Preferred Safety Consulting, Inc. Barry Cole Philip L. Colleran Philip L. Colleran, CSP Construction & Realty Safety Group, Inc. Ron Lattanzio Frank Marino ECI Safe

29、ty Services Co. Anthony Merisola Patrick Brennan, CSHM, CSSM Edison Electric Institute R. Lee Reed, Jr. Charles Kelly E. I. Dupont de Nemours & Company Gary Birchall Ronald Probasco, CSP Elevator Industry Preservation Fund Garry Kosinski Rod Gilles Ellis Fall Safety Solutions J. Nigel Ellis, Ph.D.,

30、P.E., CSP, CPE John Whitty, P.E. Gilbane Building Co. Anthony ODea, CSP, CHST Charles Praul, Jr., ASP Richard D. Hislop Richard Hislop Independent Electrical Contractors, Inc. John P. Masarick Bob Baird Institute of Makers of Explosives Lon D. Santis Susan JP Flanagan International Association of Br

31、idge, Structural, Ornamental and Reinforcing Iron Workers Steve Rank Robert Migliaccio, Sr. International Brotherhood of Boilermakers Brian Loftus Bridget Connors International Brotherhood of Electrical Workers James Tomaseski International Brotherhood of Teamsters LaMont Byrd, CIH Julie Plavka Inte

32、rnational Safety Equipment Association Cristine Fargo International Union of Bricklayers & Allied Craftworkers Michael Kassman, CHST Eileen Betit International Union of Operating Engineers Emmett Russell Steve Brown Jack L. Mickle & Associates Jack Mickle, Ph.D., P.E. Steve Stock, P.E., PLS Laborers

33、 International Union of North America Scott Schneider, MS, CIH Walter A. Jones, MS Marsh USA, Inc. Timothy Bergeron, CSP Maryland Occupational Safety & Health Mischelle Vanreusel Eric Uttenreither Mechanical Contractors Association of America Peter Chaney, MS, CSP Dennis Langley MYR Group, Inc. Nati

34、onal Association of Home Builders Robert Matuga Marcus Odorizzi National Association of Railroad Safety Consultants & Investigators Lewis Barbe, P.E., CSP, CRSP National Electrical Contractors Association Michael J. Johnston Jerry Rivera National Institute for Occupational Safety & Health Thomas G.

35、Bobick, Ph.D., P.E., CSP, CPE Matt Gillen, CIH National Railroad Contractors & Maintenance Association Jeffrey D. Meddin, CSP, CHCM, CHEP National Roofing Contractors Association Harry Dietz Tom Shanahan National Society of Professional Engineers E. Ross Curtis, P.E., DFE Paul Swanson, P.E. Operativ

36、e Plasterers and Cement Masons International Association Gerald Ryan Daniel M. Paine Daniel M. Paine Barbara Paine Phoenix Fabricators and Erectors, Inc. Robert E. Clouse, CSP, CHST Frank Massey Powder Actuated Tool Manufacturers Institute James A. Borchers David Jablonski Power Consultants, Incorpo

37、rated David Goldsmith Camille Villanova Professional Safety Consultants, Inc. Jim E. Lapping, MS, P.E., CSP Anthony Brown Property Casualty Insurers Association of America John Rabovsky, MS, CSP, ARM Daniel Lavoie, CSP Ryland Group, Inc., The Bob Masterson, CSP Scaffolding, Shoring & Forming Institu

38、te Chris Johnson Shafer Safety Solutions, LLC Carmen Shafer, CSP, CHST, CRIS Sheet Metal & Air Conditioning Contractors National Association Mike McCullion, CSP, ARM Joe Visgaitis Sheet Metal Workers International Association Gary Batykefer Charles Austin, MS SPA, Incorporated Stanley Pulz, CSP, P.E

39、 Richard B. Loucks, Ph.D., P.E. Turner Construction Company Cindy L. DePrater, ALCM Paul Huntley United Association of Plumbers and Pipefitters Laurie Shadrick Eric Packard United Brotherhood of Carpenters and Joiners of America William Irwin Thomas L. Kavicky United Union of Roofers, Waterproofers

40、 and Allied Workers John Barnhard U.S. Department of the Army Corps of Engineers Brian Becker, MS Ellen B. Stewart, CSP U.S. Department of Energy Leslie Bermudez West Virginia University Extension Service Brandon Takacs Mark Fullen, Ed.D., CSP Winchester Homes Inc. Thomas Trauger Larry Freiert ZBD C

41、onstructors (Zurn Industries) Greg Thompson, CSP Jeffrey D. Meddin, CSP, CHCM, CHEP Independent Expert(s) on the A10 Committee: Francis A. Dougherty with the U.S. Department of Labor OSHA Subgroup A10.1 had the following members: Peter G. Chaney, MS, CSP (Chair) Ronald McKenzie Timothy Bergeron, CSP

42、 Michele Myers Mihelic Gary Birchall John Neil Thomas G. Bobick, Ph.D., P.E., CSP, CPE Jim Platner, Ph.D., CIH James G. Borchardt, CSP, CPE Stanley Pulz, CSP, P.E. Matthew J. Burkart, P.E. R. Lee Reed, Jr. Jack Duley Robert Renney Dona L. File Brett Richardson Mark Fullen Jerry Rivera Carl Heinlein,

43、 CSP, ARM, CPEA, CSHM, OHST Stanley Rosen Richard Hislop Scott Schneider, MS, CIH Richard King, CSP Laurie Shadrick Mark Klimbal, CSP, ARM Carmen Shafer, CSP, CHST, CRIS Robert Matuga Mischelle Vanreusel Mike McCullion, CSP, ARM Chris Williams James. D. McIntosh, CIH, CSP Contents SECTION PAGE 1. Ge

44、neral 10 1.1 Scope. 10 1.2 Purpose . 10 1.3 Exceptions . 10 2. References 10 3. Definitions 10 4. Construction Owners Pre-Project Safety and Health Planning 12 4.1 General Responsibilities in Safety and Health Planning . 12 4.2 Construction Safety and Health in Project Design 12 4.3 Project Construc

45、tor Candidate Evaluations 13 5. Project Constructors Pre-Project Safety and Health Planning . 13 5.1 General Responsibilities in Project Safety and Health Planning . 13 5.2 Project Hazard Identification . 13 5.3 Project Specific Safety and Health Plan 13 5.4 Planning for Safety and Health with Contr

46、actor Candidates . 14 5.5 Contractor Candidate Evaluations . 15 6. Project Constructors Pre-Task Safety and Health Planning 15 6.1 Coordination of Pre-Task Planning with Contractors 15 7. Contractors Pre-Project Safety and Health Planning . 16 7.1 General Responsibilities in Project Safety and Healt

47、h Planning . 16 7.2 Project Hazard Identification . 16 7.3 Project Specific Safety and Health Plan 16 7.4 Planning for Safety and Health with Sub-Tier Contractor Candidates 16 7.5 Sub-Tier Contractor Candidate Evaluations 17 7.6 Safety and Health Training 18 7.7 Construction Equipment 18 8. Contract

48、ors Pre-Task Safety and Health Planning 18 8.1 Task Hazard Analysis 18 8.2 Task Specific Safety and Health Training . 19 8.3 Safety Equipment 19 Appendixes: A A10.1 Outline . 20 B Safety and Health Performance Measurement Criteria Guidelines 21 C Project Hazard Identification Guidelines for Project

49、Constructors and Contractors . 23 D Task Hazard Analysis Guidelines 24 AMERICAN NATIONAL STANDARD A10.1-2011 10 AMERICAN NATIONAL STANDARD A10.1 PRE-PROJECT & PRE-TASK SAFETY AND HEALTH PLANNING 1. GENERAL 1.1 Scope. This standard establishes the elements and activities for pre-project and pre-task safety and health planning in construction. 1.2 Purpose. The primary purpose of this standard is to assist construction owners, project constructors and contractors in making pre-project and pre-task safety and health planning a standard part of their planning proc