ANSI American Society of Safety Engineers A10.27-1998 Safety Requirements for Hot Mix Asphalt Facilities.pdf

1、AmericAn nAtionAl StAndArdANSI/ASSE A10.27 - 1998 (R2017)Safety Requirements for Hot Mix Asphalt FacilitiesAmerican National Standard for Construction and Demolition OperationsAmericAn Society of SAfety engineerS4Casselogo-1200dpi_vector-1c-outline.pdf 1 1/20/2012 1:31:55 PMANSI/ASSE A10.27 1998 (R2

2、017)ANSI/ASSE A10.27 1998 (R2017)The information and materials contained in this publication have been developed from sources believed to be reliable. However, the American Society of Safety Engineers (ASSE) as secretariat of the ANSI accredited A10 Committee or individual committee members accept n

3、o legal responsibility for the correctness or completeness of this material or its application to specific factual situations. By publication of this standard, ASSE or the A10 Committee does not ensure that adherence to these recommendations will protect the safety or health of any persons, or prese

4、rve property. ANSI ANSI/ASSE A10.27 1998 (R2017) American National Standard Construction and Demolition Operations Safety Requirements for Hot Mix Asphalt Facilities Secretariat American Society of Safety Engineers 520 N. Northwest Highway Park Ridge, Illinois 60068 Approved June 15, 2017 American N

5、ational Standards Institute, Inc. Approval of an American National Standard requires verification by ANSI that the requirements for due process, consensus, and other criteria for approval have been met by the standards developer. Consensus is established when, in the judgment of the ANSI Board of St

6、andards Review, directly and materially affected interests have reached substantial agreement. Substantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made toward their

7、 resolution. The use of American National Standards is completely voluntary; their existence does not in any respect preclude anyone, whether he/she has approved the standards or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standar

8、ds. The American National Standards Institute does not develop standards and will in no circumstance give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American

9、 National Standards Institute. Requests for interpretation shall be addressed to the secretariat or sponsor whose name appears on the title page of this standard. Caution Notice: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standard

10、s Institute require that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute. Published September 2017 by American Socie

11、ty of Safety Engineers 520 N. Northwest Highway Park Ridge, Illinois 60068 (847) 699-2929 www.asse.org Copyright 2017 by American Society of Safety Engineers All Rights Reserved. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the pr

12、ior written permission of the publisher. Printed in the United States of America American National Standard Foreword (This Foreword is not a part of American National Standard A10.27-1998 (R2017).) This standard is one of a series of safety standards that have been formulated by the Accredited Stand

13、ards Committee on Safety in Construction and Demolition Operations, A10. It is expected that the standards in the A10 series will find a major application in industry, serving as a guide to contractors, labor and equipment manufacturers. For the convenience of users, a list of existing and proposed

14、standards in the A10 series for Safety Requirements in Construction and Demolition Operations follows. A10.1 Pre-Project has a limited or restricted means of entry or exit (for example, tanks, vessels, silos, storage bins, hoppers, vaults or pits that may have limited means of entry); and is not des

15、igned for continuous employee occupancy. 3.8 Cut Back. Asphalt cement that has been diluted or liquefied by adding or blending petroleum solvents. 3.9 Direct Fired Tank. A tank that uses an LP #2 or natural gas flame as its heating medium. AMERICAN NATIONAL STANDARD A10.27-1998 (R2017) 12 3.10 Flamm

16、able. Any material that is easily ignited, especially by means other than direct flame. 3.11 Flash Point. The minimum temperature at which a substance gives off vapor in sufficient concentration to form an ignitable mixture with air near the surface of the material within the vessel as specified by

17、the appropriate test procedure and apparatus per ASTM test method D56-05, Standard Test Method for Flash Point by Tag Closed Cup Tester, or D93-02a, Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester. 3.12 Gravimetric Method. A method for estimation of the air concentration of

18、 asphalt fumes. 3.13 Guard. A device designed, con-structed and used to provide positive protection; prevent all access to the danger zone during operations; cause the operator no discomfort or inconvenience; not inter-fere unnecessarily with production; operate automatically or with minimum effort;

19、 be suitable for the job and the machine; provide for machine oiling, inspection, adjustment and repair; withstand long use with minimum maintenance; be durable and fire- and corrosion-resistant; and protect against unforeseen operational contin-gencies, not merely against normally expected hazards.

20、 The guard is preferably a built-in feature, should not constitute a hazard itself and be without splinters, sharp corners, rough edges or other sources of accidents. 3.14 Guarded. Protected by means that remove the likelihood of approach or contact by persons or objects from a point of danger. 3.15

21、 HMA Facility. A facility for drying, blending and mixing ingredients to make and dispense hot mix asphalt. 3.16 Hydraulic. A means of energy transmission using the flow of non-compressible liquid. 3.17 Indirect Fired Tank. A tank that uses steam, water, transfer oil or other heating medium material

22、 that does not have immediate contact with flame. 3.18 Inert Gas. A gas that will not enter into chemical reaction with other substances at normally achievable temperatures and near-atmospheric pressures. 3.19 Liquid. Any material that has a fluidity greater than that of 300-penetration asphalt when

23、 tested in accordance with the ASTM D5-05a, Standard Test Method for Penetration of Bituminous Materials. 3.20 Lockout/Tagout. The placement of a lockout device (key/combination lock or bolted slip binds) and prominent warning device (tag and a means of attachment) that can be locked and securely fa

24、stened to an energy-isolating device in accordance with established procedure, to indicate or ensure that the isolating device and the equipment being controlled cannot be operated until the lockout or tagout devices are removed. 3.21 Machinery. An assemblage of parts, some of which are in motion, t

25、hat uses energy transmitted to it to perform desired work. 3.22 May. Understood to be per-missive. 3.23 Occupational Exposure to Asphalt Fumes. Exposure in the workplace at a concentration of one-half or more of the recommended occupational exposure limit (Threshold Limit Values) as established by t

26、he American Conference of Governmental and Industrial Hygienists. 3.24 Outlet. A location where material or persons may exit from an enclosure or system. AMERICAN NATIONAL STANDARD A10.27-1998 (R2017) 13 3.25 Penetration. The consistency of an asphalt binder expressed as the depth of penetration by

27、a standard needle in tenths of a millimeter (0.1mm) when tested in accordance with ASTM D5-05a, Standard Test Method for Penetration of Bituminous Materials. 3.26 Platform. A working or access area that is elevated above the surrounding ground floor or ground, such as a balcony or platform, and that

28、 provides workers access to machinery and equipment. Also, an extended step or landing that breaks a continuous run of stairs or ladders. 3.27 Prime Coat. An application of a low-viscosity bituminous material to an absorptive surface designed to penetrate, bond and stabilize this existing surface an

29、d to promote adhesion between it and the construction course that follows. 3.28 Qualified Person. A person who, by possession of a recognized degree or certification of professional standing or by extensive knowledge, training and experience, has successfully demonstrated the ability to solve proble

30、ms relating to the subject matter and work. 3.29 Shall. Understood to be man-datory. 3.30 Should. Understood to be ad-visory. 3.31 Spontaneous Ignition. Initiation of a combustible material caused by a rapid oxidation of the material under conditions where the heat generated by oxidation raises the

31、materials temperature sufficiently to cause ignition. 3.32 Storage Tank. Above-ground atmospheric tank of horizontal or vertical type with a capacity of 50,000 gallons or less. 3.33 Tack Coat. An application of bituminous materials to an existing relatively non-absorptive surface that provides a tho

32、rough bond between old and new surfacing. 3.34 Update. Any required changes or modifications to equipment, records or methods to make them functionally identical to the latest design or system. 4. GENERAL SAFETY Before each shift or operation, all electrical components, pneumatics and hydraulics, ha

33、nd and power tools, walking and working surfaces, handrails, toeboards, vehicles, first aid, exhaust systems and all plant machinery shall be inspected for possible hazards and safety requirements as specified by the original equipment manu-facturers instructions. Consult the manufacturers manual be

34、fore operating, installing or performing any work. 4.1 Manuals, Instructions and Train-ing. All personnel shall be familiar with the original equipment manufacturers safety procedures, Occupational Safety and Health Administration (OSHA) safety procedures, Material Safety Data Sheets (MSDS) guidelin

35、es and operating information pro-vided by the manufacturer. All equipment shall be installed, operated, maintained or repaired in accordance with federal, state and local rules and regulations. Only competent, experienced and authorized personnel should perform maintenance or operational duties. 4.1

36、1 Manuals describing setup, oper-ating instructions, maintenance schedules and safety precautions shall be readily available to operators and maintenance personnel. 4.1.2 Manufacturers instructions, proce-dures, maintenance schedules, pro-grammed instructional material, and safety precautions shall

37、 be followed at all times. 4.1.3 Operators and maintenance per-sonnel shall be trained and instructed in the AMERICAN NATIONAL STANDARD A10.27-1998 (R2017) 14 recognition, avoidance and prevention of unsafe conditions including the safety rules and regulations applicable to their work in accordance

38、with the manufacturers recom-mendations and programmed instructional materials. 4.1.4 Only those employees qualified by training or experience shall operate equip-ment and machinery. 4.1.5. A safety instruction program shall be conducted on a regular and continuous basis in accordance with the origi

39、nal manufacturers programmed instructional material. 4.1.6 Visitors shall not be allowed to enter the facilitys operating area without proper safety instruction and equipment. All visitors, unless they are known to be familiar with hot mix asphalt facilities operation and equipment, should be accomp

40、anied by an employee familiar with the hazards and safety procedures. 4.2 Hazard Identification. Many potential hazards exist due to the nature of the equipment, process and vehicular traffic. Documented inspections must be con-ducted to identify hazards. Hazards that are identified must be eliminat

41、ed or controlled. All potential hazards that cannot be eliminated or controlled by design or guarding shall be clearly marked and identified by signs or tags posted as a warning to all employees and visitors. Signs and tags shall not be used as a substitute for elimination of the hazard or guarding.

42、 4.2.1 Safety color codes used for marking hazards shall be designed in accordance with ANSI/NEMA Z535.1, Safety Color Code. 4.2.2 Warning signs and tags shall not be used in place of proper design or engineered controls. Signs and tags shall be used to identify hazardous conditions and provide a me

43、ssage to employees with respect to the hazard. 4.2.3 Signal Words. 4.2.3.1 Danger, warning and caution are used to identify levels of hazard seriousness from most serious to least serious. They may also be found on decals located on HMA equipment. 4.2.3.1.1 Danger. Immediate hazards that will result

44、 in severe personal injury or death. 4.2.3.1.2 Warning. Hazards or unsafe practices that could result in severe personal injury or death. 4.2.3.1.3 Caution. Hazards or unsafe practices that could result in minor personal injury or, without the safety alert symbol, for property-damage-only warnings.

45、4.2.3.2 Notice and important are used to identify instructional procedures, sugges-tions or directions for equipment operation and maintenance. 4.2.3.2.1 Notice. Failure to follow proper instructional procedures could lead to serious and/or expensive damage to equipment. 4.2.3.2.2 Important. Informa

46、tional sug-gestions or directions regarding operation and maintenance of the equipment. 4.3 Occupational Health and Com-munication. The purpose of hazard communication is to provide employees with the right to know about hazardous materials and potential hazards of those materials that employees may

47、 be exposed to during performance of their work and to ensure employees know how to protect themselves from exposure. Information related to poten-tially hazardous chemicals and materials must be communicated to employees. Programs that identify hazards, train employees, plan emergency response to m

48、edical or environmental events and AMERICAN NATIONAL STANDARD A10.27-1998 (R2017) 15 require personal protective equipment shall be implemented. 4.3.1 Awareness. Operator safety, and the safety of others, depends upon reason-able care and judgment while equipment is in operation. 4.3.2 Medical and F

49、irst Aid. In the absence of an infirmary, clinic, hospital or physician in proximity response to the HMA facility for the treatment of injured employees, each facility shall have a person or persons holding a valid certification to render first aid and who shall be available. On each shift, a first-aid kit containing adequate first-aid supplies for the type of exposures anticipated shall be fully stocked and readily available. 4.3.3 Approval. The first-aid kit shall consist of materials approved by a physician. 4.3.4 Packing. First-aid supplies shall be stored in a clearl